Jump to content
SAU Community

Recommended Posts

Well I'll give you one thing, you;re not wasting any time.

I don't think new turbos need a break in period, they either work or they dont. 

Post results when you have them :)

 

What Dan said^^^ 

Turbo's dont need a run in. Just make sure you unplug your coil packs and turn the motor over for a while to push the oil through to the bearings so they don't spin up dry when the car is started ?

  • 2 weeks later...

presetting aem

sard 800cc
1.7 = inj duty 64% (hks 2510)  1bar (34%)
1.2 = inj duty 80% (gtx2860) 1bar (45%)

gtx2860
2500 0.22 
3000 0.36 
3500 0.56 
4000 0.76 
4500 0.9 
5000 1.07 
5500 1.15 
5600 1.2 
6000 1.2 
6000 1.26 

hks 2510
2800 0.3 
3400 0.5 
4000 0.7 
4500 1 
5300 1.5 
6100 1.7

slightly larger lag on sensations
Need a slit gear that reduces the lag
  advance intake and exhaust => more low-RPM power, less high-RPM power

I thought it was by now ancient history , the GTRS was a better replacement for the "GT2540R" and ditto the GTSS (-9) for the "GT2510R" . None of these are perfect but the -9 sounds pretty good for the power it was intended for .

The inaptly named GT2530R is really what's now known as a GT2860R with a specific 63 trim compressor wheel .

GTR twins are a PITA with late GTX compressor wheels because they were designed to work with a port shrouded compressor housing . 

The Holy Grail is probably a single twin scroll EFR and at a guess the 7670 would please most sane users .

Has anyone ever used one on the rare HKS cast low mount 26 manifold ? 

  • Like 1
11 hours ago, discopotato03 said:

I thought it was by now ancient history , the GTRS was a better replacement for the "GT2540R" and ditto the GTSS (-9) for the "GT2510R" . None of these are perfect but the -9 sounds pretty good for the power it was intended for .

The inaptly named GT2530R is really what's now known as a GT2860R with a specific 63 trim compressor wheel .

GTR twins are a PITA with late GTX compressor wheels because they were designed to work with a port shrouded compressor housing . 

The Holy Grail is probably a single twin scroll EFR and at a guess the 7670 would please most sane users .

Has anyone ever used one on the rare HKS cast low mount 26 manifold ? 

Not that I know of, however a lad I know is currently doing an EFR7670 with the .92a/r twin scroll hotside on a tubular twin scroll manifold on an RB26 with basic cam upgrade... was running N1 turbos previously.

The only time I think twins would truly work is if they were both mounted on proper manifolds, externally gated x2, intercooler x2, plenum x2 (1-3 & 4-6). That way there's no turbulence or turbos "fighting" to push into one cooler pipe/core.

By that time, effort and money you're better off with a big fat modern twin scroll single.

-5s! while there maybe some newer tech out there these are proven too work well, 330-370 dependent on health and supporting mods
had them on 34 gtr, no real lag (as reving past 5k was always the case ;)

What is your goal?

The turbo combo had already made the car a little more laggy.

Adding big cams will make that worse, and to be clear 272 cams on a stock 2.6L is a big cam.

Testing shows nothing beats the stock cams for response (248) but that you can gain a bit of midrange without sacrificing too much response with Tomei type R or type A (250 and 256).

Duration is only a small part of it though, lift will help response and bigger lift needs valve springs. Ramp rate will also help it feel not as lazy, but aggressive ramp needs valve springs as well.

I used Kelford 264 after reading lots of reviews about the Tomei having soft ramp rates.

I've got strong torque from just under 4k rpm to redline, but my car has a few other mods to help and I run e85.

I'd suggest you talk to Kelford Cams, Camtech or Clive Cams about your whole setup, current results and your desired goals.

solenoid rsp 100%, ofs 100% (Full boost)

3000, os 12.6, boost 0.3, ign 35
3500, os 12.12, boost 0.5, ign 32
4000, os 12.24 boost 0.7, ign 27
4500, os 11.44 boost 0.84, ign 25
5000, os 11.44, boost 1.01, ign 23
5500, os 11.55, boost 1.17, ign 21
6000, os 11.27, boost 1.26, ign 20
6500, os 10.75, boost 1.29, ign 18
7000, os 10.35, boost 1.25, ign 19
7300, os 9.8, boost 1.33, ign 18

rb26 can not rotate these turbines anymore. What can I do to fix this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...