Jump to content
SAU Community

Recommended Posts

Ok so I've come to the conclusion that there's no way I can get to this hose. I've decided I'll run another hose to bypass this one, should be much easier than trying to replace this one! >.<

Hi bro.... gee ya gunna hate it as i know its a prick... its a steel pipe section that runs behind the head yeah? It comes in a whole section with 2 pipes.. there is a nut in the center!!

That hose is a prick to replace [emoji21] i just replaced mine while i had the head off so it was super easy [emoji5] i actually replaced that entire metal coolant line and the rubber hose section with a braided line which can be purchased from most autobarn stores [emoji106]

Ok so I couldn’t find anywhere on a public holiday to get braided hose. Instead, I did find the perfect shaped heater hose for my application! Funnily enough, the hose I used was for the intake manifold of a 1992-1996 Magna. Go figure. 

So, as mentioned in my second post, I’ve opted to completely bypass the original route for this hose. I’ve now run a length of hose from the original source at the back of the intake manifold, down the back of the head neatly tucked away, and I then used rotary tool to cut the hard coolant line to the turbo, slip on the new hose and clamped her up. 

Pictures speak a thousand words. Might not be the ideal solution but it’ll work for me ?

B9174689-7183-4FBA-8773-47CF452AF957.jpeg

2F841ECE-0BB5-4148-91C7-35476C948B9D.jpeg

FF03E44D-BBE7-4988-8C0D-BB277AA34659.jpeg

758228BF-9EC9-4777-8562-2FD2EDFFDF04.jpeg

16B95134-C11E-4B2F-8EBF-2C82D08C918B.jpeg

6E86D5E1-D981-449F-9F26-7A027F8E5FD6.jpeg

After posting, I realised one of the pictures I uploaded was of those hose way in the air when I was fiddling around with placement - it didn’t stay at the top of the bay! :P I was able to route it down behind the head :) 

4 minutes ago, Ben C34 said:

Did you flare the hard line where you cut it? If not solid chance it will leak

No sir, although I definitely should have! As this is a temporary solution I’ve opted to put a few layers of stretched silicon tape on the end, on which I slid the hose on and it was super tight and only went on with a little bit of rubber grease. I then clamped  her down good. I totally acknowledge this isn’t great long term and I’ll aim to sort out something more permanent when I next have a decent play under the bonnet. 

4 minutes ago, admS15 said:

Good thinking, might be a good idea to wrap the end near the dump pipe with some sort of heat proof material or make a heat shield emoji106.png

Cheers - yeah that’s smart I might see what I can dig up  

 

 

fuuarkk.. fun times :(

I've had that split on my current car (old motor) ended up replacing it with EFI hose and ran a braided china-spec ling long dim line to the turbo.

New motor has proper 4-ply eBay silicon hose to the braided water line lololol...

Someone come swap me their BMW 335i for my entire car/motor

  • 1 month later...

Same here I used a piece of good quality EFI hose .

For the record I would have used a couple of OE quality EFI hose clamps as well .

You can get at the mongrel on an R33 by removing the three bolt IAC housing and some of the wiring loom brackets in that area . 

A .

  • Like 1
  • 2 weeks later...

A bit late, but I replaced that hose on the Stagea (RB25DET NEO) the other week. Prick a job to get out, I used really long nose pliers and long nose bent pliers. To get to the clamp behind the engine I went horizontally from the intake side. I replaced the hose with Gates 8mm universal Z bend from Repco and new clamps.

I bought a seven piece radiator hose kit on Ebay, trying to workout where all these hoses go :/

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...