Jump to content
SAU Community

Recommended Posts

They had sent me a walkaround of the car showing all the areas where the clearcoat was peeling and offered to repaint the car if I wanted so I had them go ahead and repaint the car A54 to be a brighter color than the AH3.

IMG_5891.JPG

IMG_5892.JPG

IMG_5894.JPG

Once the car was in my hands, I needed to get rid of those dated RPF1's.  I know they are a favorite of most of the car community but they just aren't my taste.  Went with a set of 18x9 +30 Aodhan LS007's on 245/35 BF Goodrich G-Force T/A KDW's.  I love the aggressive tread pattern.

IMG_1010.JPG

IMG_0843.JPG

  • 3 weeks later...
  • 2 weeks later...
6 hours ago, KiwiRS4T said:

Good work. Have you considered replacing the heater core while the dash is out!

I actually was thinking of replacing all of the heat and ac components that I can come across to make sure its good for another 25 years! 

9 hours ago, ActionDan said:

Is that Active Red? 

Hahaha!  Paint code is A54.  I'm sure it goes by a few different names, but wanted to keep it a Nissan color.  I wasn't a fan of the AH3.  Too dark and gloomy for me.  

18 minutes ago, ActionDan said:

Similar but no, Nissan had quite a few reds through the models. This looks good. 

Why are you pulling it down if it was already resprayed? 

I like your wheels better than the RPFs

because when it was painted, they didnt do the engine bay so it didnt match.  and then some quarter panel rust was coming back so I decided to get the overfenders to get rid of it...and then went wider front fenders, hood, bumper, and spoiler...so it all just needed to get done since I was pulling the motor too.  I basically want it to be pretty much a brand new car when its back together and last another 25 years lol.

9 minutes ago, ActionDan said:

Nice, it will look great when it's done.

Plans for the engine? 

full rebuild to just refresh everything and then bolt on some good stuff.  kinugawa bolt on turbo.  fmic.  r35 coils, r35 injectors, emu black ecu, front facing intake w/ ls drive by wire throttle body, 350z drive by wire pedal, tomei cams and adjustable gears.  all the basics.  I'm also completely removing hicas with an s13 subframe and all of gktech's adjustable arms, and added air ride.  

Should be a tidy little rig. 

Could I possibly encourage you to go something better than Kinugawa... 

RB20 needs all the help it can get with response. A Twin Scroll GTX would do nicely without breaking the bank. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This sounds like someone who would have owned an R33 in their past... It's okay, I'm 100% picking up what you're putting down Mark.
    • Just back on what was raised about jacking off the the tow/tie down point on the front of cars. I've used it plenty. I've also watched it on a car where you could see it move the front end of the car. It was like the front end/whole car being tweaked and twisted a bit. I will say, I struggle to find good jacking points on MOST cars. The ones that have good points, I then normally struggle to find a jack tall enough to make the car change height!   One of my go to points for either the jack, or the axel stands though, is either a suspension pickup point, OR a subframe to chassis major bolting point. I actually think its the subframe on my R33 that has a bit of a bend in it, from being jacked in the middle too. However, it could have been one of my many other cars I've had over the years! Or it could also be the from me jacking it up, and the fact the top of the front radiator support isn't there, so it can allow the front of the car to move and bend etc.
    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
×
×
  • Create New...