Jump to content
SAU Community

Recommended Posts

They had sent me a walkaround of the car showing all the areas where the clearcoat was peeling and offered to repaint the car if I wanted so I had them go ahead and repaint the car A54 to be a brighter color than the AH3.

IMG_5891.JPG

IMG_5892.JPG

IMG_5894.JPG

Once the car was in my hands, I needed to get rid of those dated RPF1's.  I know they are a favorite of most of the car community but they just aren't my taste.  Went with a set of 18x9 +30 Aodhan LS007's on 245/35 BF Goodrich G-Force T/A KDW's.  I love the aggressive tread pattern.

IMG_1010.JPG

IMG_0843.JPG

  • 3 weeks later...
  • 2 weeks later...
6 hours ago, KiwiRS4T said:

Good work. Have you considered replacing the heater core while the dash is out!

I actually was thinking of replacing all of the heat and ac components that I can come across to make sure its good for another 25 years! 

9 hours ago, ActionDan said:

Is that Active Red? 

Hahaha!  Paint code is A54.  I'm sure it goes by a few different names, but wanted to keep it a Nissan color.  I wasn't a fan of the AH3.  Too dark and gloomy for me.  

18 minutes ago, ActionDan said:

Similar but no, Nissan had quite a few reds through the models. This looks good. 

Why are you pulling it down if it was already resprayed? 

I like your wheels better than the RPFs

because when it was painted, they didnt do the engine bay so it didnt match.  and then some quarter panel rust was coming back so I decided to get the overfenders to get rid of it...and then went wider front fenders, hood, bumper, and spoiler...so it all just needed to get done since I was pulling the motor too.  I basically want it to be pretty much a brand new car when its back together and last another 25 years lol.

9 minutes ago, ActionDan said:

Nice, it will look great when it's done.

Plans for the engine? 

full rebuild to just refresh everything and then bolt on some good stuff.  kinugawa bolt on turbo.  fmic.  r35 coils, r35 injectors, emu black ecu, front facing intake w/ ls drive by wire throttle body, 350z drive by wire pedal, tomei cams and adjustable gears.  all the basics.  I'm also completely removing hicas with an s13 subframe and all of gktech's adjustable arms, and added air ride.  

Should be a tidy little rig. 

Could I possibly encourage you to go something better than Kinugawa... 

RB20 needs all the help it can get with response. A Twin Scroll GTX would do nicely without breaking the bank. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...