Jump to content
SAU Community

Recommended Posts

Is that yen ? As that is about $1.95 AU so similar. I'm in central Australia so fuel is expensive, but by the look of it even BP 98 at cheapest is $1.60 in Sydney.

Thank you,

absolutely love the car, too bad Japan is so humid, gotta do some rust protection work before the wet season next year. 
I am yet to see a museum grade one yet with 0 spec of surface rust anywhere in japan so far unless they have been painted over or maybe I am looking too hard haha.

 

 


 

Installed some new goodies today,

New pedal set, thought the Vspec2 ones look good and the rubber ones on mine looked a bit dull.
After 2 hours...what an absolute pain in the a** it was to get the clutch pedal on... oh my god... final result looks great though, sorry for the Dark pics, 

Merry Christmas!

A1226F69-0242-4903-AAAF-CA77FBEA8069.jpeg

14BA7F4A-C354-4A28-A59B-0A18E6398682.jpeg

3C664FBA-433F-47AE-93AD-95761BCD4996.jpeg

I have a quick question for someone who might know,

I upgraded my ride from the 32 GTR which i thought and imagined to have more interior rattles because it is older than the 34.

To my surprise, the 34 seems a lot more noisier compared to the 32, maybe Nissan’s way of cutting cost happened mostly on the interior design and parts? Would you agree?

one specific noice that is starting to annoy me comes somewhere in the left hand side around the left dash area, if the road is even a little bit bumpy, seems to make a plastic tapping noise, 

I ripped out the glovebox to see if there was anything loose but couldn’t find anything out of place so I asked a mate who seems to have the same noise in the same place and he was told that that is where the abs unit sits and that is the cause of the noise,

do you guys think this is true?

 

19 hours ago, Bnr34RME said:

I have a quick question for someone who might know,

I upgraded my ride from the 32 GTR which i thought and imagined to have more interior rattles because it is older than the 34.

To my surprise, the 34 seems a lot more noisier compared to the 32, maybe Nissan’s way of cutting cost happened mostly on the interior design and parts? Would you agree?

one specific noice that is starting to annoy me comes somewhere in the left hand side around the left dash area, if the road is even a little bit bumpy, seems to make a plastic tapping noise, 

I ripped out the glovebox to see if there was anything loose but couldn’t find anything out of place so I asked a mate who seems to have the same noise in the same place and he was told that that is where the abs unit sits and that is the cause of the noise,

do you guys think this is true?

 

Don't agree. My 34 GTR has no rattles or squeaks and is a tight as a drum. If i didn't have an exhaust and cams it would sound just like my 2013 CX5, quiet as a mouse.

You might have a few gremlins to sort out.

The dashboard attachment to the firewall can move a little and squeak/rattle. Any and all of the HVAC ductwork can get dislodged and rattle. Any fool how has just thrown wiring up under the dash without securing it (stereo, gauges, etc) will cause rattles. The front suspension bushes can make noise that sounds like it's coming from under the dash (because it's effectively all the same steelwork). The list goes on and on.

And R34 are at least as well built as R32, and both are only as well built as any other mass produced Jap car from the era - which is good but not great.

  • 1 year later...

Hi guys,

Long time no post, hope everyone is going through covid ok still enjoying their rides.

I have done some few very minor mods to share and have a quick question regarding some future mods I will be doing and would really like your opinions.

1. First my aircon panel seemed a bit dim so I DIY’d it with LED which was a fun exercise.

2. Second, I am waiting for my sexy custom headlights being made up.

3. Next in the list will be the tail light upgrade.

https://www.qestjapan.co.jp/phone/product/382

4. I purchased the genuine Nismo Z-tune fenders which were quite hard to come by even in Japan and will install once I choose the right bonnet upgrade.

***Question****
 

Im trying to choose between a genuine V-spec2 carbon hood (the one with the single Naca duct) or the Nismo R-tune bonnet as my car already has the Nismo R-tune air cleaner duct that the previous owner installed already.

But not sure which one to get especially  If the R-tune bonnet with be a pain in the a*** to keep water out during a carwash, does anyone know if this bonnet can keep water out? The official description on the website says that it can stop rain but now sure how to even attempt to clean it without getting a lot of water in the engine bay.

please let me know your thoughts / opinions and information about the bonnets so I can choose between the two.

Look forward to your opinions!

 

 

04BD5BBB-5544-44F2-87BB-8E4B7DCC04D6.jpeg

A684DA78-0DC9-4A8F-A481-C369F2C2219B.jpeg

F55C00A5-8417-470D-871D-C71213620178.jpeg

6BD1563A-9DEA-46C6-A767-3AA8FEF44DD5.jpeg

1D9C28A0-2B13-4F66-A976-B73B7EEFE50A.jpeg

F090EDED-DD90-4F50-A0F5-6D6E22F73A21.jpeg

ECC5B1DD-B163-497F-B5B6-31356185A34F.jpeg

307BD6AD-2A8D-4DFF-B9A4-EAB7BD09F2FE.jpeg

A48EB416-A82B-4416-B5E9-269F1891AC8C.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...