Jump to content
SAU Community

Recommended Posts

I've seen a couple of these dashes in person, all with the same very poor quality. Laine @bcozican will know....

 

This is not how a 3D printed part should look though. A properly 3D printed part will look good. These guys either have absolutely no idea what they are doing, or they are using a very poor quality printer. To me, I think they are using way too high a stepover in order to save time on each print. Which tells me their printer isn't up to the task of the production environment they are going for. Also the edges not being straight indicates the prints are warping, which again points to either a rushed print or cheap materials. There is serious refinement needed before these things are ready for production.

  • Like 1
6 hours ago, DaymoR32 said:

Thats because the images on the website arent photos but 3d renders spat out by solidworks/fusion 360, everything looks better on CAD.

I belive there is actually a way now of spitting out the sliced file (essentially gcode for the 3d printer) putting it back into the cad package and then being able to render it - showing how it would truly look once printed with all the layer lines etc..

 

Fusion 360 will show you a simulation of the machined/printed part in the CAM workspace just by default. I haven't used Solidworks, but I imagine it will be the same.

1 hour ago, Unzipped Composites said:

 

Fusion 360 will show you a simulation of the machined/printed part in the CAM workspace just by default. I haven't used Solidworks, but I imagine it will be the same.

Yeah I don’t use fusion myself, used solid works daily for the past 10 years. Understand you can do CAM for machining but don’t think the 3D printing part profiles are there yet (well not in solid works anyway).

i do agree with the part quality, they are probably printing around the 0.3mm layer height to get the clusters out in roughly 6-8 hours. Soon as you go down to 0.2 or 0.1 you are massively increasing production times. 
 

still at $200 odd for a cluster you should be able to justify the longer time. It’s not like they’ll be using heaps of filament, electricity won’t be much either. The cost is probably in the design time and possibly in the machines

 

18 minutes ago, DaymoR32 said:

Yeah I don’t use fusion myself, used solid works daily for the past 10 years. Understand you can do CAM for machining but don’t think the 3D printing part profiles are there yet (well not in solid works anyway).

i do agree with the part quality, they are probably printing around the 0.3mm layer height to get the clusters out in roughly 6-8 hours. Soon as you go down to 0.2 or 0.1 you are massively increasing production times. 
 

still at $200 odd for a cluster you should be able to justify the longer time. It’s not like they’ll be using heaps of filament, electricity won’t be much either. The cost is probably in the design time and possibly in the machines

 

My cluster was $407 =/

Does anyone know if the 3dracingsolutions stuff is any better? 

14 hours ago, Murray_Calavera said:

My cluster was $407 =/

Does anyone know if the 3dracingsolutions stuff is any better? 

Wow.. mine was 200 odd and i wasnt happy for the level I wanted for my car so on sold it

Horses for courses - not great and super clean but can see the appeal for people as an easier and reasonably decent solution for those that dontwant to pay for custom or have the know how to make it work otherwise

  • 2 weeks later...

Well here we go again. 

I sent the wrong dash back, new dash arrived today.... With the wrong LED light. They sent a blinker indicator instead of a battery light. 

And unless I'm completely retarded, I can't see how it would be secured as the nut is a long way from reaching any threads.

20200813_195043.jpg

20200813_195157.jpg

20200813_195405.jpg

I hope so. I haven't trial fitted it yet. 

I still haven't setup the ECU to receive the fuel level signal yet as my in tank fuel level float thing has fallen off again on my last track day. Can't wait to dig around in the fuel tank again and put it back in it's slot. 

  • Like 1
  • 3 weeks later...

Nice :)

If you get a chance while your installing it, do you mind doing a little how-to on how to wire the battery light resistor? 

I don't know why I can't get my head around how to wire in the resistor where the battery light was. 

23 minutes ago, Murray_Calavera said:

If you get a chance while your installing it, do you mind doing a little how-to on how to wire the battery light resistor? 

I don't know why I can't get my head around how to wire in the resistor where the battery light was. 

But reading online, isn't there a red and white cable that is around 9V that you would just add the globe too?

 

I'm using a resistor, I'll link to the instructions below - 

https://cdn.shopify.com/s/files/1/0059/8332/files/Alternator_Excitor_LED_Module.pdf?2740344812066901986

I guess I'll just wire the "Blue - To Alternator Switch" to the charge light and see how I go. 

Photos from my car that runs an IQ3 Haltech dash. Was installed prior to me owning it.

there’s a white with red trace and a red wire that have been cut into and now power a globe. 814187CF-66B8-4B5F-A224-EB4108D6CC59.thumb.jpeg.1323b7093476ad3022cdd84037b27d5f.jpeg

6DB9E02B-2847-4DEB-A720-034B50170974.thumb.jpeg.397ade6aac20f4629459a6bc1fcf9b28.jpeg

When you flick the ignition onto accessories the globe lights up. Once you start the car the globe goes out.

 

  • Like 1

@Murray_Calavera

how did you get around the central locking control unit issue? Just realised I can’t lock my car unless the battery is disconnected as there is a central locking control unit in the cluster. When I go to lock the door the motor tries to keep the door unlocked. 
 

also for the Speedo they needed to wire the gearbox speed sensor to the factory inputs in the Haltech otherwise you won’t get any speed readouts. Turns out from factory the speed sensor goes to the dash first then the ecu....

Edited by Tobz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...