Jump to content
SAU Community

Recommended Posts

Evening fellow R chassis enthusiests.

I'm currently in a back and forth discussion with myself going further with my 34 gt coupe 

Overall the car is a genuine example of a clean, well maintained r34. Not show car spec by any means but presents and drives great.

question is, given that prices are going throught the Roof (nearly tripled since i bought my first 34 GTT in 2015) and have no signs of stopping anytime soon..(US market bla bla bla)....would it be less frowned apon now to swap the drive train out for gtt spec?  I just don't want to get caught out selling what I have now and not being able to purchase the better model because there is none for sale or because theyve slipped too far out my price range to quickly..

Sorry for the rant...just can't seem to make up my mind for myself

Edited by Jairn01
Link to comment
https://www.sau.com.au/forums/topic/480304-is-now-a-good-time/
Share on other sites

The difference between the (very very few) on carsales looks to be about 10K.

Will 10K cover a gearbox/ECU/Engine swap/tune?

I reckon not, not really, and there's other issues (diff, sensors, also the hassle of doing this).

I say buy that cleanish 20K R34 GTT
https://www.carsales.com.au/cars/details/1999-nissan-skyline-25gt-t-r34-manual/SSE-AD-6532178/?Cr=2

Then sell R34 GT off to a P plater.

Future you would be happier.

  • Like 2
  • Thanks 1
53 minutes ago, Kinkstaah said:

The difference between the (very very few) on carsales looks to be about 10K.

Will 10K cover a gearbox/ECU/Engine swap/tune?

I reckon not, not really, and there's other issues (diff, sensors, also the hassle of doing this).

I say buy that cleanish 20K R34 GTT
https://www.carsales.com.au/cars/details/1999-nissan-skyline-25gt-t-r34-manual/SSE-AD-6532178/?Cr=2

Then sell R34 GT off to a P plater.

Future you would be happier.

I appreciate the feedback, and everything that has been mentioned so far has been going through my head.....aside from swapping in an 8, that's just not gonna happen.

As for the cost, I can get ahold of essientally a complete half cut GTT for roughly 5k minus the tailshaft and rear subframe/diff ect. 

And that's where I'm at an impasse.....I could probably get 12k for the GT as it sits....+5k for the half cut I have ready for the swap, adds up to 17k - Just shy of what's needed to buy a decent GTT and that's if there's any for sale at the time....there's becoming less and less for sale, the want adds are increasingly outweighing the for sale adds.

A GT converted to a turbo is not a GTT.

A GTT front cut is good spares for a GTT.

A gap of a few grand between the cost to build "a half-arsed never gunna be a real GTT" and just buying one, does not seem like a saving worth making. If the GT had a whole pile of parts on it that you couldn't bare to part with, you could still bring many of them over to a freshly bought GTT.

An engine conversion on a GT might as well be "a bloody good one", rather than just slipping in the GTT motor. Why not go for broke if considering a transplant? No-one would consider a GT with a V8 transplanted into to it to be a bad thing. Or a 20B. Well, OK, there's reasons to not like putting a rotary into anything. But it would still be cool. Whereas dropping a 25DET in it is a cop out.

 

  • Like 1
7 minutes ago, GTSBoy said:

A GT converted to a turbo is not a GTT.

A GTT front cut is good spares for a GTT.

A gap of a few grand between the cost to build "a half-arsed never gunna be a real GTT" and just buying one, does not seem like a saving worth making. If the GT had a whole pile of parts on it that you couldn't bare to part with, you could still bring many of them over to a freshly bought GTT.

An engine conversion on a GT might as well be "a bloody good one", rather than just slipping in the GTT motor. Why not go for broke if considering a transplant? No-one would consider a GT with a V8 transplanted into to it to be a bad thing. Or a 20B. Well, OK, there's reasons to not like putting a rotary into anything. But it would still be cool. Whereas dropping a 25DET in it is a cop out.

 

I understand where you're coming from, in the sense that at the end of the day it will still be a GT no matter what I do to it. I'm not trying to pretend it will be somthing it just isn't.

And as for converting it to a ford/Holden/wankel/jz just isn't even a thought in my head, it'll be a neoT/rb26 or i just wont do it.

The whole point of this post is to see if people may consider it to be a financially realistic option given how rapidly these cars are jumping in price, but I've gotten the general vibe and now I'll just look to try put a few extra pennies away as quickly as possible before the inevitable happens, cheers

?

30 minutes ago, Jairn01 said:

I appreciate the feedback, and everything that has been mentioned so far has been going through my head.....aside from swapping in an 8, that's just not gonna happen.

As for the cost, I can get ahold of essientally a complete half cut GTT for roughly 5k minus the tailshaft and rear subframe/diff ect. 

And that's where I'm at an impasse.....I could probably get 12k for the GT as it sits....+5k for the half cut I have ready for the swap, adds up to 17k - Just shy of what's needed to buy a decent GTT and that's if there's any for sale at the time....there's becoming less and less for sale, the want adds are increasingly outweighing the for sale adds.

If it instantly appeared with no stress, and cost $0, you'd be 3k ahead. But I've been down this path and it doesn't cost $0, and doesn't create 0 stress.

Realistically is a stock R34 GTT worth 20K? No not really, you can buy plenty of better (stock) cars for that money. At some point "sensible" is not applicable to these things and its all $ -> Personal, subjective enjoyment

If you want that car to be a turbo.....just add a turbo. Pretend that the GTT never existed (except for perhaps needing a gearbox, diff and brakes from one!) and just treat it as if it was any other NA RWD car that didn't have a turbo option.

The above suggestion is also slightly sarcastic, because I also generally tend to advise against that choice when you can just go out and buy a turbo version of the same car anyway. But it's a perfectly fine way to turn a GT into a turbo car.

Otherwise, what Greg says above is all true. There is no financial sense in any of these ideas. So just choose how you wish to piss your money up against the wall and get to it.

@Kinkstaah as a former workshop mechanic and tyre fitter, can confirm that 20k will in fact get you in the seat of some really fun cars, but for me it's more sentiment than anything, I genuinely enjoy the way these chassis' drive and handle

Edited by Jairn01

Make up a list of all parts that are different/ better between the na and turbo model, then work out what each one will cost to buy and install if it needs to be upgraded. Then factor in more costs for when things don’t go exactly to plan

then think about the legality/ insurance side of things. Will your insurance cover a turbo converted car in the case of an accident? 
i personally  would not do it unless you have some strange emotional attachment to the car.

 

  • Like 1

My 2c

This is only ever worth it if you skip the stock GTT step, e.g. put in a forged RB25, big highmount turbo, big aftermarket brakes, etc etc

Install parts that if you had a stock GTT, you'd end up replacing anyway. 

Go big or buy a real GTT and leave it stock. 

5 hours ago, Murray_Calavera said:

My 2c

This is only ever worth it if you skip the stock GTT step, e.g. put in a forged RB25, big highmount turbo, big aftermarket brakes, etc etc

Install parts that if you had a stock GTT, you'd end up replacing anyway. 

Go big or buy a real GTT and leave it stock. 

Best advice given here so far. The expense of converting to stock parts then later wanting more power and paying twice is silly.

16 hours ago, Murray_Calavera said:

My 2c

This is only ever worth it if you skip the stock GTT step, e.g. put in a forged RB25, big highmount turbo, big aftermarket brakes, etc etc

Install parts that if you had a stock GTT, you'd end up replacing anyway. 

Go big or buy a real GTT and leave it stock. 

I agree with you 100% but to do this legally in my state (SA) I have to get it as close to GTT trim as possible firstly to pass inspection

31 minutes ago, Jairn01 said:

I agree with you 100% but to do this legally in my state (SA) I have to get it as close to GTT trim as possible firstly to pass inspection

Not strictly true. You could go as far as an engineer will let you go. Vehicle Standards just have a preference for such conversions as this to be "to the same spec as factory" because they'd prefer not to have actual modified cars running around. But they will approve a car that has gone straight from NA GT to GTTish + mods if they have given you approval to go ahead based on your application (and the engineer's OK, of course).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...