Jump to content
SAU Community

Recommended Posts

Hi!

I have had the pleasure of having my high pressure line on my power steering start leeking. 

Tried to so a quick fix to no help, and since stagea parts arent easy to come by where i live, i was wondering if anyone have swapped out the oem with AN connections and hose? 

8 hours ago, KiwiRS4T said:

What's a servo?

Supose to be power stearing, but i forgot that power stearing was the word when i wrote it, and servo is what we use to call it and sounded rigth in my head, gonna try to get the post fixed

If you don't have access to Nissan parts and can't wait to source them from Amayama  etc then a hose doctor (hyraulic hose repair) such as ENZED, Hydraulink (don't know what brands you have  where you are) should be able to make one for you.

  • Thanks 1
9 hours ago, KiwiRS4T said:

If you don't have access to Nissan parts and can't wait to source them from Amayama  etc then a hose doctor (hyraulic hose repair) such as ENZED, Hydraulink (don't know what brands you have  where you are) should be able to make one for you.

The w8 i can handle, the 350$ + shipping +25%toll i can not ?

Therfor i wonderd if anyonr had mad eout of AN so i coud just make it myself ?

How could you make it out of AN fittings when there are not AN fitting on the PS pump or the rack? You have whatever fittings Nissan put on there. But these will just be a hydraulic fitting of one sort or another, so if you took the PS line into a hydraulic hose doctor place, they should be able to knock something up.

8 hours ago, GTSBoy said:

How could you make it out of AN fittings when there are not AN fitting on the PS pump or the rack? You have whatever fittings Nissan put on there. But these will just be a hydraulic fitting of one sort or another, so if you took the PS line into a hydraulic hose doctor place, they should be able to knock something up.

Ther is adapter that can be used mostly, on the pump side is a normal banjo so not hard to find

On the rack side is a bit wors but shoud be posible if i can figure out the siced :)

6 hours ago, WR33KD said:

Im changing all my lines to AN high and low pressure side. It can be done

Cous you tell me witch firings are in the rack? Or at least what treada and atuff so i can irder some and try ?

 

Do you alsoe kbow if the sensor conekted in the presur eline is any inportant? ?

2 hours ago, TheKenso said:

Cous you tell me witch firings are in the rack? Or at least what treada and atuff so i can irder some and try ?

 

Do you alsoe kbow if the sensor conekted in the presur eline is any inportant? ?

You need to rack fittings that go to an6 and one pump fitting that goes to an6 then an8 from pump to reservior. Hardest part it making sure your long enough so a lot of measuring 

AN hose and fittings should not be used for hydraulic applications like power steering. Get a proper hydraulic hose made up - it will probably cost less than trying to do it with AN hose and fittings.

On 30/05/2020 at 12:48 AM, Unzipped Composites said:

AN hose and fittings should not be used for hydraulic applications like power steering. Get a proper hydraulic hose made up - it will probably cost less than trying to do it with AN hose and fittings.

How so? They are strong and can withstand hige presure, as long as you buy the corekt hose :)

The price wil probebly be more expensive if ingo to somone ro make ir due to wher i live, alsow they most likly wont do it because it is car related and stearing related.

1 hour ago, TheKenso said:

The price wil probebly be more expensive if ingo to somone ro make ir due to wher i live

First world country that is smaller than most states in Australia. Just drive to a place that can build you a line.

1 hour ago, TheKenso said:

alsow they most likly wont do it because it is car related and stearing related

I can think of 15 places within a 1hr drive of where I live that will build a power steering line for me. All of them industrial hydraulic places. You should tell your weenie TUV koolaid drinking Euro regulators to shut up and just let people make a hydraulic hose.

  • Haha 1
1 hour ago, TheKenso said:

 

The price wil probebly be more expensive if ingo to somone ro make ir due to wher i live, alsow they most likly wont do it because it is car related and stearing related.

More expensive than what? Mobile hydraulic hose doctors make lines for $million machinery including huge excavators and small forklifts. They make brake parts, steering parts and more for all kinds of vehicles. Do you know how much pressure your steering system can experience momentarily? A professional is going to do a better job than you can  and has the gear to do it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...