Jump to content
SAU Community

Recommended Posts

Have two quick spark related questions for everyone. I'm in the middle of building a stroked 2.8 and shooting for around 600kw. I'm expecting to run around 35psi to get there with my gen2 6466. 

1st - Will good condition splitfire coilpacks have any issues around that pressure/hp? Should I just purchase r35 coilpacks to be safe or am I wasting my money?

2nd - As for sparkplugs, I'm planning on running 8's with a .6mm gap. Will this suffice?

Thanks

Edited by TurboTapin
Link to comment
https://www.sau.com.au/forums/topic/483017-sparkplugscoilpacks-600kw/
Share on other sites

On 11/18/2021 at 11:19 AM, TurboTapin said:

Will good condition splitfire coilpacks have any issues around that pressure/hp?

They could be good, or they could struggle. I'd be worried that they're not good enough. It's not as if Splitfires are actually any better than brand new OEM coils. They're just the same technology level, well made.

On 11/18/2021 at 11:19 AM, TurboTapin said:

Should I just purchase r35 coilpacks to be safe

This would be my approach to anything above 400kW these days. Eliminate the possibility of trouble.

On 11/18/2021 at 11:19 AM, TurboTapin said:

2nd - As for sparkplugs, I'm planning on running 8's with a .6mm gap. Will this suffice?

8 is probably wise. I would want to be running fu(k tons more than 0.6mm gap. That's sufficient argument for R35 coils straight away.

R35 coils and the greatest spark plugs in the world, Denso IK01-24 or NGK R7434-8 and forget about it for a couple of years.

 

they can be had from RHD japan for relatively reasonable money. supercheap will hit you for $99 a plug.

Edited by burn4005
  • 2 weeks later...
  • 2 weeks later...
On 11/19/2021 at 2:18 PM, burn4005 said:

R35 coils and the greatest spark plugs in the world, Denso IK01-24 or NGK R7434-8 and forget about it for a couple of years.

 

they can be had from RHD japan for relatively reasonable money. supercheap will hit you for $99 a plug.

Could you explain the advantage of the Denso/NGK plugs you listed? Spark power, longevity, or something else my brain can't think of?

On 08/12/2021 at 7:09 AM, iruvyouskyrine said:

Could you explain the advantage of the Denso/NGK plugs you listed? Spark power, longevity, or something else my brain can't think of?

Yes - The NGK R racing plugs have iridium or platinum ground electrodes with a much higher melting point vs the iridium ix plugs having an iridium centre and nickel ground, so if you value your engine on a big dollar build you will run nothing else. A big detonation event or lean out and there goes your ground electrode through your cylinder.

Also they are available in colder heat ranges like 8 and 9 and have a concealed centre electrode which is helpful for large boost applications.

I personally have blown tips off the ix iridium plugs destroying my engine before and refuse to use anything else in a 400kw + engine now.

  • Like 2

DENSO IK01 24 IRIDIUM Denso racing track race dedicated special spark  plugs|plug f|plug playerplug and play solar power - AliExpress

the ground strap is pure platinum, and very short which keeps it cool to avoid pre-ignition events. electrode is iridium with a pointed tip. gap is fixed to 0.7mm.

very concentrated electric field, ground strap very good at dissipating heat and resisting ablation. 

 

  • Like 2
  • 2 weeks later...
  • 2 weeks later...
On 19/11/2021 at 2:18 PM, burn4005 said:

R35 coils and the greatest spark plugs in the world, Denso IK01-24 or NGK R7434-8 and forget about it for a couple of years.

 

they can be had from RHD japan for relatively reasonable money. supercheap will hit you for $99 a plug.

Shouldn't we be using NGK R7436 (JIS 53mm) instead of R7434 (ISO 50.5mm)?

On 11/01/2022 at 9:48 PM, R.3.2.G.T.R said:

Shouldn't we be using NGK R7436 (JIS 53mm) instead of R7434 (ISO 50.5mm)?

Yes that's exactly what I use on the 2.8. Having said that the plugs really jam into the R35 coilpacks hard - so much so that when you remove them the stalks usually come away from coilpack and get stuck on the plug which is totally annoying, requiring the entire one piece coil bracket to be removed to retrieve them. This is using the Godzilla motorsports bracket with R35 coils, so a PRP bracket might not have this problem if the spacing to plug is slightly higher.

The iso shorter length appears it would be a better fit I believe than the longer jic length but am yet to confirm this.

  • Like 1

 

On 18/01/2022 at 1:54 PM, GTSBoy said:

Some dielectric grease perhaps?

Could try it maybe, but it does appear that the R35 coilpack setup has always felt like the standard jic length, which is the correct ones for RBs, is the culprit. Comparing to stock or splitfires it's definitely more noticeably tight with R35 coilpacks with a BCPR type jic plug.

I'm pretty sure that's the reason @burn4005 is using the iso length instead of the jic as that 3mm shorter plug makes them fit the coil a bit nicer.

It's not that bad really, I'm just a bit pedantic and notice these types of things. The important thing is these plugs definitely are the best in the business.

Good point on R35 coils stalks @BK, I have R35 coilpacks on top of bcp7res (JIS) ATM, also not using PRP coil brackets

Don't have sticking issue but there is bit of gap when just resting coils springs on plugs

I think I'll just order set of JIS plugs as it's fitting ok with R35 coils as is

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...