Jump to content
SAU Community

Recommended Posts

Have two quick spark related questions for everyone. I'm in the middle of building a stroked 2.8 and shooting for around 600kw. I'm expecting to run around 35psi to get there with my gen2 6466. 

1st - Will good condition splitfire coilpacks have any issues around that pressure/hp? Should I just purchase r35 coilpacks to be safe or am I wasting my money?

2nd - As for sparkplugs, I'm planning on running 8's with a .6mm gap. Will this suffice?

Thanks

Edited by TurboTapin
Link to comment
https://www.sau.com.au/forums/topic/483017-sparkplugscoilpacks-600kw/
Share on other sites

On 11/18/2021 at 11:19 AM, TurboTapin said:

Will good condition splitfire coilpacks have any issues around that pressure/hp?

They could be good, or they could struggle. I'd be worried that they're not good enough. It's not as if Splitfires are actually any better than brand new OEM coils. They're just the same technology level, well made.

On 11/18/2021 at 11:19 AM, TurboTapin said:

Should I just purchase r35 coilpacks to be safe

This would be my approach to anything above 400kW these days. Eliminate the possibility of trouble.

On 11/18/2021 at 11:19 AM, TurboTapin said:

2nd - As for sparkplugs, I'm planning on running 8's with a .6mm gap. Will this suffice?

8 is probably wise. I would want to be running fu(k tons more than 0.6mm gap. That's sufficient argument for R35 coils straight away.

R35 coils and the greatest spark plugs in the world, Denso IK01-24 or NGK R7434-8 and forget about it for a couple of years.

 

they can be had from RHD japan for relatively reasonable money. supercheap will hit you for $99 a plug.

Edited by burn4005
  • 2 weeks later...
  • 2 weeks later...
On 11/19/2021 at 2:18 PM, burn4005 said:

R35 coils and the greatest spark plugs in the world, Denso IK01-24 or NGK R7434-8 and forget about it for a couple of years.

 

they can be had from RHD japan for relatively reasonable money. supercheap will hit you for $99 a plug.

Could you explain the advantage of the Denso/NGK plugs you listed? Spark power, longevity, or something else my brain can't think of?

On 08/12/2021 at 7:09 AM, iruvyouskyrine said:

Could you explain the advantage of the Denso/NGK plugs you listed? Spark power, longevity, or something else my brain can't think of?

Yes - The NGK R racing plugs have iridium or platinum ground electrodes with a much higher melting point vs the iridium ix plugs having an iridium centre and nickel ground, so if you value your engine on a big dollar build you will run nothing else. A big detonation event or lean out and there goes your ground electrode through your cylinder.

Also they are available in colder heat ranges like 8 and 9 and have a concealed centre electrode which is helpful for large boost applications.

I personally have blown tips off the ix iridium plugs destroying my engine before and refuse to use anything else in a 400kw + engine now.

  • Like 2

DENSO IK01 24 IRIDIUM Denso racing track race dedicated special spark  plugs|plug f|plug playerplug and play solar power - AliExpress

the ground strap is pure platinum, and very short which keeps it cool to avoid pre-ignition events. electrode is iridium with a pointed tip. gap is fixed to 0.7mm.

very concentrated electric field, ground strap very good at dissipating heat and resisting ablation. 

 

  • Like 2
  • 2 weeks later...
  • 2 weeks later...
On 19/11/2021 at 2:18 PM, burn4005 said:

R35 coils and the greatest spark plugs in the world, Denso IK01-24 or NGK R7434-8 and forget about it for a couple of years.

 

they can be had from RHD japan for relatively reasonable money. supercheap will hit you for $99 a plug.

Shouldn't we be using NGK R7436 (JIS 53mm) instead of R7434 (ISO 50.5mm)?

On 11/01/2022 at 9:48 PM, R.3.2.G.T.R said:

Shouldn't we be using NGK R7436 (JIS 53mm) instead of R7434 (ISO 50.5mm)?

Yes that's exactly what I use on the 2.8. Having said that the plugs really jam into the R35 coilpacks hard - so much so that when you remove them the stalks usually come away from coilpack and get stuck on the plug which is totally annoying, requiring the entire one piece coil bracket to be removed to retrieve them. This is using the Godzilla motorsports bracket with R35 coils, so a PRP bracket might not have this problem if the spacing to plug is slightly higher.

The iso shorter length appears it would be a better fit I believe than the longer jic length but am yet to confirm this.

  • Like 1

 

On 18/01/2022 at 1:54 PM, GTSBoy said:

Some dielectric grease perhaps?

Could try it maybe, but it does appear that the R35 coilpack setup has always felt like the standard jic length, which is the correct ones for RBs, is the culprit. Comparing to stock or splitfires it's definitely more noticeably tight with R35 coilpacks with a BCPR type jic plug.

I'm pretty sure that's the reason @burn4005 is using the iso length instead of the jic as that 3mm shorter plug makes them fit the coil a bit nicer.

It's not that bad really, I'm just a bit pedantic and notice these types of things. The important thing is these plugs definitely are the best in the business.

Good point on R35 coils stalks @BK, I have R35 coilpacks on top of bcp7res (JIS) ATM, also not using PRP coil brackets

Don't have sticking issue but there is bit of gap when just resting coils springs on plugs

I think I'll just order set of JIS plugs as it's fitting ok with R35 coils as is

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...