Jump to content
SAU Community

Recommended Posts

8:5;1 comp in ideal for boost. There are copper head gaskets that are custom made if you know the thinness to achieve 8:5:1.. 9;1 comp is fine… but you will be limited to how much boost you can run.

Www.coppergaskets.com.au. If your after one 👍

  • Haha 1
26 minutes ago, FiXtUrE said:

8:5;1 comp in ideal for boost. There are copper head gaskets that are custom made if you know the thinness to achieve 8:5:1.. 9;1 comp is fine… but you will be limited to how much boost you can run.

Www.coppergaskets.com.au. If your after one 👍

What’s the limit of boost at 9.0:1? Very curious to know.

  • Like 3
  • Haha 1

From my understanding you can achieve about 5 - 10 psi with 9:1 - 9:5:1 comp safely before it goes pop.. before you think this wack boost levels, you have to consider the turbo, dump back exhaust, fmic etc your going to use on your rb30. 

what power do you want, and is it a 5sp or auto?

  • Haha 3
3 minutes ago, FiXtUrE said:

From my understanding you can achieve about 5 - 10 psi with 9:1 - 9:5:1 comp safely before it goes pop.. before you think this wack boost levels, you have to consider the turbo, dump back exhaust, fmic etc your going to use on your rb30. 

what power do you want, and is it a 5sp or auto?

You can leave the stock comp and put it on e85 and run higher boost?

2 hours ago, FiXtUrE said:

Regardless to fuel it’s the boost/comp pressure that will determine if it gos pop or not.

what comp ratio do you think this thing has to run 100psi of boost?

 

  • Like 2

Lol… I doubt it’s running 100psi.

rb30 with 8:5:1 head gasket + stock mani with spacer adaptor to blolt on rb25 t03 (with ceramic wheel) and possibly stock dump depending where turbo sits + custom mid pipe + r31 house rb20det cat back + hr31 stock intercooler at a maximum 12 psi + nistune should the job with auto (400kw)

steel wheel t03 + r32 gtr or r31 house fmic + forgies with big boost, go for your life with manual if you can find a clutch up to the job 👍

  • Haha 1
7 hours ago, FiXtUrE said:

Lol… I doubt it’s running 100psi.

rb30 with 8:5:1 head gasket + stock mani with spacer adaptor to blolt on rb25 t03 (with ceramic wheel) and possibly stock dump depending where turbo sits + custom mid pipe + r31 house rb20det cat back + hr31 stock intercooler at a maximum 12 psi + nistune should the job with auto (400kw)

steel wheel t03 + r32 gtr or r31 house fmic + forgies with big boost, go for your life with manual if you can find a clutch up to the job 👍

Yeah I doubt these 6 second 200+mph cars are running the boost they say they are. 

I mean look at this guy claiming he is running 90+psi of boost and a 250 shot. 

Why can't they just be honest and say they are really running 12psi of boost. 

 

  • Like 1
  • Haha 2

It's basically Hollywood isn't it? I mean look at this! You can see the car on the dyno, see the data from the log.... 600KPA target. 

More like 82KPA target and a bunch of YouTube Hollywood magic showing fake numbers and fake data, right? 

 

  • Haha 2
9 hours ago, FiXtUrE said:

Lol… I doubt it’s running 100psi.

rb30 with 8:5:1 head gasket + stock mani with spacer adaptor to blolt on rb25 t03 (with ceramic wheel) and possibly stock dump depending where turbo sits + custom mid pipe + r31 house rb20det cat back + hr31 stock intercooler at a maximum 12 psi + nistune should the job with auto (400kw)

steel wheel t03 + r32 gtr or r31 house fmic + forgies with big boost, go for your life with manual if you can find a clutch up to the job 👍

What the hell kind of crack smoking joke is this? That is literally double the power possible with a stock ceramic shitter. When I'm talking about shards here, they can either be what you are on, or the pieces of turbine. Take your pick.

  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...