Jump to content
SAU Community

Rez's R32 GTS-t Type M... presentable version!


Recommended Posts

Rezz - what are the offset number plate brackets worth, and who makes them?

I busted a bolt that holds the bracket to the centre support rail when taking the plate off for track day yesterday :P and that offset looks like a good solution... and where does it bolt to?

  • Replies 322
  • Created
  • Last Reply

Top Posters In This Topic

Rezz - what are the offset number plate brackets worth, and who makes them?

I busted a bolt that holds the bracket to the centre support rail when taking the plate off for track day yesterday :cheers: and that offset looks like a good solution... and where does it bolt to?

The bracket was about 2,000 yen (?) from SuperAutobacs (Ikeri's place :)) but I'm not sure who makes them... some generic company who gets their gear made offshore (China). It bolts to the bumper directly... just used self tappers to screw into the bumper from below.

You could knock up some stainless brackets at a steel fabrication place for about $5 though right? (DIY ;))

ronin, ask bass junky to make one up for you, he's a sheet metal fabricator.

failing that get a vice, pop down to bunning and get a piece of sheet metal and just bend it n drill it. real easy to do, and yeah as rezzeh said, get some self tappers to go in the bttom, or for more security, drill a hole in the bumper and put a bolt thru and a nut on the other side.

 

You could knock up some stainless brackets at a steel fabrication place for about $5 though right? (DIY :()

Thanks Rezz, was actually thinking of bending two pieces of aluminium strap and bolting them in... but I am a lazy bastard so will probably run around without a plate until the police get angry :D

I call him: T R A N S F O M A T I O N!transformation1.jpg

transformation3.jpg

:bahaha: :bahaha: :bahaha: :bahaha:

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

|

V

transformation2.jpg

transformation4.jpg

Grand total? A$8,950... including car...

:looney:

hey rezz just wondering about what you did with the holes left over from the stock rear spoiler? does that mini back spoiler cover them?? i wouldnt think so but...
I went to Kounan (or some generic lifestyle/hardware center) and bought these little rubber round thingies that popped straight into the holes in the boot... instant fix. Troy knows what I'm talking about.

The Nismo rear spoiler doesn't cover any of the holes in the boot though, I just painted the round rubber things body colour, thats it.

that colour coding with the wheels and the bomex lip is horn.... :whip:

oh and what are the intercooler kits over there worth? I found the blitz kits to be far more expensive than the Greddy items.. (atleast on the soarer platform) any idea why this is?

I went to Kounan (or some generic lifestyle/hardware center) and bought these little rubber round thingies that popped straight into the holes in the boot... instant fix. Troy knows what I'm talking about.

 

The Nismo rear spoiler doesn't cover any of the holes in the boot though, I just painted the round rubber things body colour, thats it.

You mean grommets :P

hey Justin, great car mate! just found this thread. Very understated, yet very tough, i like it a lot! :D

and to Justin/Troy, would you guys be able to hook me up with some parts i've been trying to get, but proving very difficult? I'd pay you guys a little somethin', somethin', and up front too, but i thought i'd ask first, and then go into detail (via PM) if it's possible. I can put some stuff on a container that i know of.

cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...