Jump to content
SAU Community

Recommended Posts

I wouldn't bother with the gtst actuator....when they were sitting around for nothing they were worth it, but now days because lots of people do the change they are getting expensive. just buy a manual boost controller "bleed valve" instead. they are more adjustable and start at about $40.

If I had a road gtst (and I did or about 8 years), I'd keep it under 200kw. Bit of boost, maybe a computer (nistune or powerfc, haltec is double the price for no benefit on a basic setup). Definitely shocks, springs and swaybars (guy sydneykid's kit). And then enjoy it.....spend any money you had left on entering motorkhanas and track days :)

  • Like 1

I'd dump the 12psi actuator in just for that little bit more of a gain. Hmmmm... Might just go for a nistune+tune and hope for a 210kw? Is that realistic?

Dont go the 12psi actuator unless you get an ecu. Or youll just end up in r&r

Theres always something you didnt think of or notice that needs fixing.

I think you should go the cheap option, you can always do more later.

One thing i noticed with having the bonnet open at the back, is that fumes come into the cabin.

The inlet for cabin air is in the plenum (under the front window) and because its a really bad idea to chop big holes in the firewall, its really the only place you can get fresh air into the cabin.

So i realize now, the vented bonnet i have is only good for racing, and i have to close the back of my bonnet, the best place to vent is in the front guards.

Like they said, cf isnt good in the sun, just go fibreglass, its not much heavier if at all. Many cf bits are just cf on the surface, fibreglass underneath.

Painting mirrors will cost NOTHING at all, i have plenty of black paint, and gold pearl powder if you want to play with that. Save it for the engine or computer.

And from my experience with my Nistune, i agree that more isnt better, smoother and more filled out is better.

Just remember, speed comes from the power delivered ALL through the rev range you use before changing gear. So a fatter curve is faster than a high peak.

  • Like 1

Theres always something you didnt think of or notice that needs fixing.

I think you should go the cheap option, you can always do more later.

One thing i noticed with having the bonnet open at the back, is that fumes come into the cabin.

The inlet for cabin air is in the plenum (under the front window) and because its a really bad idea to chop big holes in the firewall, its really the only place you can get fresh air into the cabin.

So i realize now, the vented bonnet i have is only good for racing, and i have to close the back of my bonnet, the best place to vent is in the front guards.

Like they said, cf isnt good in the sun, just go fibreglass, its not much heavier if at all. Many cf bits are just cf on the surface, fibreglass underneath.

Painting mirrors will cost NOTHING at all, i have plenty of black paint, and gold pearl powder if you want to play with that. Save it for the engine or computer.

And from my experience with my Nistune, i agree that more isnt better, smoother and more filled out is better.

Just remember, speed comes from the power delivered ALL through the rev range you use before changing gear. So a fatter curve is faster than a high peak.

Didn't think about the air venting business into cabin... that's an interesting thought. I think I won't go for cosmetic but might chase 210kw or so.Nistune and tune or something. Not sure if I want to chase 250kw just yet... gah the choices!!

Jeremy I'll take you for a cruise soon in my 33. Maybe this week some time?

Sitting in the airport now

KEEN MARINE! ! ! !

Hmmm... maybe. Haven't been since Mik last entered.

Need New Camera Practise. :D

Do eet! :D

Oh, cams licence expired, cant afford racing at the moment anyway.

Still would like to go for a look. :thumbsup:

Yes! I would like to see the beast in real life ;)

Last month I was out there and it was a little wet. Turbo Ovlov almost went into the tyres at the first chicane :wacko:

Yeah they are small that's for sure. They wouldn't even be comfy for a medium build person.

Picked up the r33 from storage. Took roughly half hour to get started and then puffed black smoke for a while but now it's perfectly fine. Put a fresh tank of fuel in and took it for a good spin.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...