Jump to content
SAU Community

Recommended Posts

Anyone had any experience with Goodyear Revspec RS-02's?

There was a good review on them in the Wheels tyre comparison article early this year, yet it doesn't seem like anyone on here is using them.

I got relatively good price quote for them ($1154 for all 4 corners), but am I better off spending a bit extra to get the Toyo T1R's ($1370 for all 4) as it seems like quite a few people on here rate them...

Tyres will be going on an R33 GTST (front: 235/45/17, rear: 255/40/17) with around 270rwkw.

Can anyone help? ;)

Anyone??? :)

Well here is my 2yen about that.....

There is absolutely no point in buying a great performance car and then putting crap tyres on them.  And the Falken 326 are crap.  They are basically among the cheapest tyres that you can get in big low profile sizes so compliers fit them on a lot of freshly imported cars.

The difference between a bad road tyre and a good road tyre is amazing, you really can feel it and you will enjoy your car heaps more with decent tyres.

So.....enough crapping on....I am saying don't spend 250ea on tyres + 1000 on an intercooler, spend 500ea on tyres instead you will love the difference.

Anyone that has been in a car on the track on race tyres will know what I mean about the difference :)

There is a massive difference, and the car will be faster for sure, but then again, since i got some t1-rs to replace my old yokos(had gone off) i sort of miss the car being edgy and powerslides ;)

Now the rear of the car is simply stuck.

I have a R31 s2 silo, not exactly high performance. The falkens seem good enough for me and are way better than the tyres I have now. I have to agree on the wet handling of the falken ziex, but he dry handling I thought was pretty good (for my car). I also cant afford $200+ tyres.

Just got my 255/40Z/R17 Toyo T1R's fitted @ $350 a pop.

I must say they stick very well. Alot like my Continential Sport Contact 2's but they were really bald.

Will post up more when I drive the T1Rs abit more.

I can't believe the prices you guys are willing to pay for ordinary old road tyres. Some of the cheap stuff is junk, but some of it is very good too. But the same goes for expensive name brand tyres. The worst tyre I've ever driven on were Pirellis. They were just downright dangerous - in the dry! I took them back the next day. And the Michelin Pilot Sports i had were pretty damn ordinary too. Not dangerous like the Pirelli, but still pretty awful.

Best value for money tyre I've used is the Simex SM8000 on an old R31 daily driver and they were as good as any Yokohama/Bridgestone/Toyo road tyre I've ever used. When I needed tyres recently for my HR30 coupe, I didn't hesitate to buy them again - 225/50*16 for $130ea retail. And my GTR is just about due for new road tyres (17"), and I know exactly what I'll be using for it too. I think they're about $170. A friend who has also been involved in motorsport for years has a WRX daily driver and uses Tornado tyres. His 225/50*16 were around $140ea, and they are just fine too - even for spirited driving on the wonderful roads around his Sunshine Coast Hinterland home. If you want to pay mega dollars for a name brand, go right ahead, but they aren't any better than alot of the cheap tyres.

Bridgestone GIII's

Had them on for a week and done a few hundred km on them.

235/45 17

So far very impressed.

Noisy tyre at 40-50km, but at 60 you can't hear them.

Grip - amazing. Cornering is spot on, very predictable handling, and corner speeds are noticeably higher (based on some well-known laps in an industrial area).

Wet performance was solid, really had to try to lock them up, which was dead easy on previous rubber.

I'd give them an 8-9/10 overall, but i've never driven on S-03's or T1-R's or the like to compare.

Previous tyres have been Simex (i'd rate them a 4/10) and k104's (6-7/10)

Edited by Beeble

Currently got an Astra 2.2. Runnin Hankook K104 sport's on it. They're pretty good, I can still take em to their limits around a few corners, but not sure if it the tyres or the car (it's a sporty astra, but its still an astra).

Gettin a R32 GTS-T next week *fingers crossed pre-purchase inspection goes ok* Lookin to get some new wheels and tyres for it.

Possibly some Konig Trouble rims in 18x8 ($425/each).

post-22691-1132365805.jpg

And lookin at maybe some Toyo T1-R's

post-22691-1132365754.jpg

If anyone is interested in prices.

265/35ZR18 97Y - $495

225/40ZR18 87Y - ????

265/40ZR17 96Y - $420

235/45ZR17 97Y - $320

Will prob get the 265/35 18's on the rear and 225/40's on the front.

Does that sound like a good setup? Are those prices ok? I'm gettin a call back on a package deal with the wheels and tyres all from one place.

Yes the shi7 rubber just doesnt cut the mustard.You can get them to hold in for a lap or 2 but after that you are figting it for grip.

why would you expect them to? all normal street tyres are crap on the track. And not just after 1 lap - they have no grip to start with, and only get worse from there.

I purchased a set of Toyo T1R's for the front of my car the other week and am very impressed with them. Braking and steering has definately improved.

I have tried a lot of tyre places and the best prices I have found have always been Total Tyres in Oakleigh, MELBOURNE.. and no I don't work for them. These guys prices are always cheaper than their competition in my experiences, buy a good margin usually. They have a large range of tyres.. may need to go elsewhere for rims but ask them for a price anyway. These guys are not a bunch of grease monkeys either, they are careful with rims. A friend had some painted rims which 2 other places scratched (after being told to be extremely careful) and these guys haven't made a mark after numerous visits. They can install suspension too, during the week only though.

Just though I'd let you know.. If any one knows of somewhere that has cheaper prices in melbourne preferrably in the SE region then POST IT UP, I want to know.

I couldn't see one but is there a section for good tyre places stickied somewhere??

Go the T1R's!

Edited by Fry_33

Bridgestone Grid IIs 215/60/15

Responsiveness - 9/10

Dry grip - 8/10

Wet grip - 7/10

Value for Money - ??

These tyres came with my 180sx (from import dealer) and were fairly second hand by the time I picked the car up. The responsiveness was outstanding. If you found yourself understeering on a corner, you wind in more lock and the tyres would do exactly as you tell it. I felt very comfortable with these tyres in the dry or the wet. In fact when it came time to replace them, I was so scared that the next set of tyres wouldn't be as good.

Bridgestone Potenza GIIIs 215/60/15

Responsiveness - 6 / 10

Dry grip - 9/10

Wet grip - 7/10

Value for money - 8/10 ($150 a tyre)

Have been fairly happy with this set of tyres. Have problems breaking traction in a straight line in the dry and even in the wet sometimes. Responsiveness was not as good as the Grid IIs, you need to make sure you take the corner at the appropriate speed. However the grip is certainly there.

Damn you lucky ppl with small widths. Cheap good tyres.

I have Dunlop Formulas (FM9Y?)

245/45/r17, all fours, r32gtr.

Very sticky, I would go back to these though very exp.

Be aware this is on a GTR

Dry 9/10

Wet 7.5/10

Value for money 5/10

Okay tyre though very exp.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...