Jump to content
SAU Community

Recommended Posts

Sydney roads are f*cked. For one of the "best cities in the world" they should really improve the road system. I didn't realise how f**ked it was until I got coil-overs and set the dampening to the softest setting and still bounced all over...

Sydney roads are f*cked. For one of the "best cities in the world" they should really improve the road system. I didn't realise how f**ked it was until I got coil-overs and set the dampening to the softest setting and still bounced all over...

i wouldnt list Sydney that highly.......

as for the dampening thing. i thought the same thing.....soft settings = soft ride.

seems i was wrong, on soft the bounces seem to continue on. ive got mine wound about half way to hard on the front. and a few notches less on the rear and it became alot more drivable on my crappy ass main road.

XXR 527's for a r34 gtt

18x9.75 +20 or 18x8.75 +20?

Which would be the better flush fitment (aggressive but not a ton of camber)?

Guards will be rolled and lipped btw

18x9.75+20 will poke fronts, inset rears. Won't need camber, will only scrub on full lock.

So would it be better to run 18x8.75 + 20 up front then? Or would that be too flush/not very good stance?

I am about to buy 18x9.5+22 fronts. The way I see it, I don't full lock often. I am looking for form>function. But yeah, if you go the 8.75, you will be 12mm LESS poke. Depends if you want it to look good, or be functional. But I would go wider on the rears or think about bolt on spacers if you want some flush. I am going 18x10.5+30 rears, I don't think that is poke enough, but I haven't bolted them on to see, I am going off a mates car that has 18x9.5+20 all round and his rears are inset.

Does anyone know how

9.5 +22 (front)

10.5 +30 (rear)

Will sit on a gtt?

Too aggresive or nahh?

If you took any sort of time to actually read this thread, you will realize that I am doing that exact fitment. I wish people would actually read the thread before posting. I went through 95 pages of this thread before I asked any questions. Took me a few hours, but at least I know what I am talking about now. Anyone can tell you it will fit, but you want to get the fitment that YOU want, not what other people say will look good.

Either way. With that fitment, you will NEED the guards rolled, front and back. With no camber, you will poke fronts, and hopefully poke rears. Only by about 5mm, but poke none the less. Run stretched tyres, and lower the car onto them, and you will get some nice stance. I have a black gtt, going varrstoen 2.2.1 (te37 copy) rims. 225/30/18 fronts, 245/35/18 rears. You will get scrubbing on full lock on the plastic lining inside the front arches. If you don't have coil overs, get them.

http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=396593

That is 18x9.5+20 all round. With that fitment we are wanting, fronts will be inset 2mm, rears will poke 3mm more.

I have ordered my rims already and I plan to have them on in 2 weeks on my R&R week (I am up on site for 2 weeks). Pics will be up immediately. If you want to wait until then to see the fitment, and judge for yourself.

If you took any sort of time to actually read this thread, you will realize that I am doing that exact fitment. I wish people would actually read the thread before posting. I went through 95 pages of this thread before I asked any questions. Took me a few hours, but at least I know what I am talking about now. Anyone can tell you it will fit, but you want to get the fitment that YOU want, not what other people say will look good.

Either way. With that fitment, you will NEED the guards rolled, front and back. With no camber, you will poke fronts, and hopefully poke rears. Only by about 5mm, but poke none the less. Run stretched tyres, and lower the car onto them, and you will get some nice stance. I have a black gtt, going varrstoen 2.2.1 (te37 copy) rims. 225/30/18 fronts, 245/35/18 rears. You will get scrubbing on full lock on the plastic lining inside the front arches. If you don't have coil overs, get them.

http://www.skylinesa...ttach_id=396593

That is 18x9.5+20 all round. With that fitment we are wanting, fronts will be inset 2mm, rears will poke 3mm more.

I have ordered my rims already and I plan to have them on in 2 weeks on my R&R week (I am up on site for 2 weeks). Pics will be up immediately. If you want to wait until then to see the fitment, and judge for yourself.

Alrightty, cheers mate, yeh i just could not be bothered going through all the effort!

but thanks heaps for the reply, i'll be looking forward to you posting up pictures soon!

With that set up it sounds like a lot of aggressiveness, me likey!

Anyone have this problem? I've got a R33 GTS-t with R33 GT-R wheels on it. 17x9 +30 all round.

Seems like on 'near' full lock the wheel smashes into the suspension arm.

Luckily at the same time, I spotted the bracket holding the brake about to fall off, quickly bolted that back up!

378693_10152062538435352_1763147499_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...