Dose Pipe Sutututu

Woohoo, it's in! Loving gate atm, just running 0.5 bar at the moment till I work out what ecu I get. Will hack up the stock shield tomorrow and heat wrap the screamer, it's a tiny bit loud lol

I bought my own female (singular) connectors and soldered 12ga wire directly to it, I even left the factory wiring/relays/FPCM/resistor alone - in the event my dual relay setup fails I still can plug back the OEM wiring and drive home

what do you need done exactly? I got a mate that's pretty cluely with the MIG, however will be in mild steel. He recently modded my dump pipe (extended, reclocked and v banded) and the welds are awesome. He's in Lansvale too, so not too far from you and is actually friends with Hakkan (if that makes a difference) haha

My friend bought one, we saw the insides and he then sold it back on eBay and now runs the stock manifold then thought, hey let's go on alibaba and find one, turns out it's identical (just different photos, in different lighting). Up to you buddy.

are the front springs progressive? also how high do they sit? If they're progressive and sit about 5cm ish gap from tyre to wheel arch I'll take the fronts (if you're willing to separate) ** tried to PM you yesterday, your box is full.. I mean your inbox lol

probably through Alibaba or Aliexpress, because they look identical Looks familiar? http://www.aliexpress.com/item/Top-mount-turbo-exhaust-manifold-for-Nissan-Skyline-RB20DET-RB25DET-3mm-mild-steel/1052835806.html Wow looks like the same turbo kit Hybrid Performance sell too? http://www.aliexpress.com/item/WSRacing-turbo-kit-for-Nissan-Skyline-RB20DET-RB25DET-Upgrade-430hp/1052572162.html

you can hook it up the same way you had it before OR like this:

but but but... I'm running an external gate trust the car is super quiet, I'm planning to mod my exhaust to make it even MORE quiet. I'm running 1x mid muffler, 1x resonator, 1x rear cannon muffler. Will be changing the mid muffler to a hooker aero chamber item soon. So for normal driving conditions, it would be probably as loud as a stock car, until I crack zeee gate hehe

Available: Factory SMIC $50 Factory SMIC piping $50 Factory Blow Off Valve $30 Factory Down pipe $20 Factory Dump pipe $20 Factory Mint Handbrake OEM boot $10 Factory HICAS unit $10 Factory Passenger side kick panel, 1x flare clip broken $5 Factory R33 GTS-t Manual Radiator, working removed for upgrade $20 Bendix DB1170 Front Brake Pads (Near New) - "Guaranteed Race Car Like Squeal" $20 - pending Blitz 60mm Gauge Holder $5 Fully Sick Gearboot & Handbrake Boot in black leather with purple Stitching $10 ----- Sold: Subframe Lock Collars - Blue in Colour, full set (8 pieces) $40 Factory Catalytic Converter $50 Subframe Lock Collars - Blue in Colour, full set (8 pieces) $40 Factory O2 sensor $10 Factory Stock R33 Rims x4 (tyres might not pass an inspection) $80 Factory Cross over pipe $30 Superlow Rear Springs R32/R33/R34 GTS-t/GT-t $40 Binned: Factory Steering Rack Ends/Tie Rods $10 Factory Steering Tie Rod Ends $10

SOLD!!!!!!!!!!!!!!!!!!!!!!!!

tbh, 0 gauge is overkill for cranking a RB motor.. if you look at the factory R33 power cable to the back it's about the size of 2GA

Performance Exhaust Northmead, check out their Facebook page and be amazed with the quality Hakkan knocks up.

and sold

more money for fuel & mods haha I use the optima D51RT1 (but I've got a R33)

thanks mate, same as that solid tree that went down too.

eBay can be had delivered to your doorstep super cheap, $254 superwin

do a comp test, the 1.6 and 1.8L motors in the N16 like to blow head gaskets

I'm sure the N/A version of the R33 Skyline Coupe in Silver came with a tacho ...

grab an optima D34 and be done with it will last ages and cop a good beating too (vibrations, heat, discharges, etc.)

something with dual airbags, ABS, seat belt pretensioners, air conditioning and cup holders.

anyone want 2x Falken Azensis RT615 in 225/40/17 ? trade for beers

hence we both own boats, I mean skylines

get one of these: http://www.moroso.com/catalog/categorydisplay.asp?catcode=42001 Cops cannot complain, strong and also has a vent if you're not using a deep cycle/AGM/sealed battery. Cheapest way around it is to buy MIG cable from like BOC or so.. it's equivalent to 2GA cable and is more than enough to start your car, you can get 2GA terminals from JayCar on the cheap (those alloy ones) and get a nice 120amp ANL blade fuse holder. I did something like that years ago, however the moroso battery box was over $200+ back in the days, they're like $115 on eBay now delivered ** lol Owen beat me to it

hope so turbo, manifold, gaskets, studs, lines are all in.. even chopped my RS*R downpipe and welded 2x bends to fit up to the turbo's v band flange. just need a screamer pipe and my exhaust wrap to come and let's see how she goes