Jump to content
SAU Community

Dan_J

Members
  • Posts

    1,983
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    100%

Everything posted by Dan_J

  1. nice work on the manifold stao, what ID size of steam pipe are you using to weld in ?
  2. question, is this turning left or right on a roundy or just going straight through? ^^as above also when lowering a car you'll get more wheel spin off the line as there is more neg camber on the rear meaning less tyre to the road. try lowering you tyre pressure to 30 or so for more rear grip when its raining next i recommend you get out to your local free drivers training area and practice a low speed donut
  3. ^^ hypergear can machine the stock rb t3 inlet cover to match up and bolt onto the ss series of turbos which means stock looking turbo
  4. r32 or slightly more smaller a31/c33 turbo, Nic_A31 may have one also depending on cooler, shorten piping as much as possible for more response
  5. nice whens full boost? also if they're not try gapping plugs to 0.8 or even 0.6 ( if 8 doesnt do it) before you change coil packs
  6. already running a r33 airbox, although at the wreckers noticed how much bigger the v6 falcon even the older efi camrys compared to the rb filter panel
  7. headlight stalk shorting out some how? try tracing wires from brown box for bad wiring lastly give up and go to a good auto elec
  8. well yes was thinking that, least its confirmed now
  9. true words
  10. now i thought i knew the answer to the question although i figure i'd ask just for the sake of it. would it be legal to run an air box ( bigger) from another make of car and it not to be considered as an intake mod?
  11. i'm liking this, you've skidded it, banged it up, repaired it and skidded it some more you win tho, i only got mine in late 2006 so you have stuck to a ceffy longer then myself
  12. my trial seat rail could go heaps more lower, although car is non sunroof so i fit
  13. could just get the universal rails and get the flat bar tabs welded on
  14. plugs fouling up / coil pack , if it sounds like a wrx its running on 5 cyl . maybe remove coil pack cover so they dont over heat
  15. now ethanol has a higher octane level then ULP although i thought its cooling of intake temps is worse then ULP, correct me if i'm wrong? so ethanol does lower intake temps more then ULP ?
  16. Rob, would that have been enough room for a tow truck to grab your car where it was parked? seems like cars are being taken by this method lately
  17. would something like this work ? buttweld- black from a metal shop
  18. cheapest option is to shim it locked with 3+ mm of shims but will need to sort out the back lash spacing shim if you want it 100% comfortable
  19. so what type of steel pipe would i be looking for in the metal shop to pass cams, CHS , ERW/seamless linepipes ?
  20. yeah vl speedo cable works fine for speed reading 40 at 3000 rpm in 2nd etc etc
  21. J31 maxima rear drums are a slight upgrade if you wanna clear 15's, thats if the j31 calipers bolt on( haven't got round to confirming /sourcing the brakes) and will need to redrill to 4 stud as they are 5
  22. QLD has said rule isnt that something that NSW is gonna go through soon? hope not , with rwc getting tighter will not be fun
  23. yeah no problem, deadlines and the mad rush catches up with us when we least expect it at times
×
×
  • Create New...