vetter2769

because it doesn't make the whoooosshhhh tshu thus sttsuhuhuhuthshsuhuth sound. Didn't someone make over 400 kw with stock air box recently?

they all have a bit of oil in them, its most likely caused by positive crank case pressure which results in the oil air breather to spit oil into the intake of the turbo, then it throws it out the hot side, and because it only throws out such small amounts its not going to travel all the way to the IC. when i pulled my old 180 apart the oil was all through the IC and everywhere. I'd say its fine for a while, if you have plans on doing a new turbo + injectors + ecu etc then don't worry about it, save up and buy those things, don't waste money on factory turbo seals lol. EDIT - What ben said ( beat me too it haha)

if the pods inside the front bar then it will probably suck up water when it rains. cold air box and run a pipe to it.

I'm in Geelong and I'll do it for a slab of CC and dry!

best solution is to get a windscreen with aerial in it... I'm sure you dont need me to tell you that you can buy a antenna and attach it to your car.

you don't plug it into anything mate, you need to read the linked thread, theres a wire that needs power to "activate" the antenna.

So a bit of feed back on "evil within" - Its fkn terrible. If you can buy it for under $40 then thats about all its worth. I got through the first chapter, some parts didn't make sense, like I got chased by a guy with a chainsaw then instead of cutting me to pieces he puts a small knick in my leg so I'm able to limp away and escape.... then I went to play chapter 2, but it told me it hadn't loaded yet, ended up waiting 45 minutes for it to load!!! wtf!!! after that chapter 3 was the same!! thats about as far as i got. otherwise graphics 8/10 story line 6/10 scare factor - 9/10 - especially on a 200 inch projector with surround sound at midnight! I got it on ebay for $35 earlier that day I saw it in EB games for $99

I might try and bring some skyline owners up from Geelong, I'll keep you posted

it is very nice! So im guessing it uses closed loop function on the nistune instead of the lambda narrow band? Obviously the wideband is much more accurate than the lambda.

Looks like your in Gawler, long way from anything! you might have to ring around some auto elects if you don't know what your doing, they of corse will charge. Too bad your not form vic, id have that mess sorted within halfa with a few beers and a multimeter.

whaatttt why don't you guys tell me this before I go out and spend 200+ bucks on a wideband Gauge is mounted where the stock R34 gtt gauges are. nothing on my A pillar.

Yes! 2nd this. But I get my kicks from the single player, more than the online stuff.

Just got my hands on "evil within" It looks amazballs. so keen to play it. I bought my ps4 3 months ago, it came with a free game - kill zone I bought sleeping dogs and BF4 I took the clear plastic of killzone today and played it for the first time while waiting for evil within to download, It actually wasn't all that bad....... for a free game, can't imagine anyone actually paying money for it. best game this year - The last of us wins hands down! Keen for the new Gran Turismo and +1 for G27 + ps4 support.

Looks fair clean mate, but because it was owned by a P plater, I would never buy it unless the price was attractive.. like under 10k All honesty aside from that, the body looks fantastic and assuming everything runs fine and no issues with the engine id say anywhere between 11-13k also would depend on a buyer, perhaps a P plater who is obsessed with GTR's but won't be able to afford one till they are 50 might pay 13k for it. so thats based on that, thats my answer - between 11-13k. Cheers - Dan P.S you can always ask a private assessor for an evaluation, I know its not a common vehicle but have you tried rebook.com?

All good mate, I guess they could list where they got it done and what they had done, but for more information people usually start build threads.

yeah the occasional glance to make sure everything is ok is about all its good for. I can set alarms on it incase it goes too rich/lean. Cheers mate.

Thanks mate, I never bought the gauge with the intention to data log in the first place, but because it mentioned that it came with it, I was hoping it would be relatively easy to do it. I will keep the gauge and I probably won't tune my car myself, if I do, it will only me minor adjustments till I get my nistune or power fc. Thanks to those that responded

http://www.sau.com.au/forums/topic/401087-what-did-you-do-to-your-car-today/

WHAT Are you in VIC? is the head unit stock? do they sell aux cables for that head unit? - have you googled it type in google - car audio places closest to me, and then take it to one of those guys. otherwise I'm in Geelong and would be able to help typically you can't just "plug one in" to a standard H/U in that case a new H/U would be the go. Cheers - Dan

I'm not sure what it was intended for, it may very well be to output to an ECU, I found a few arduino boards on ebay, but they all log data to a fat32 or SD card, and they still don't incorporate RPM. I'm sure I've seen some guys doing there own tuning with a piggy back who use the data logging system to tune, heres the thread here - http://www.sau.com.au/forums/topic/327734-apexi-afc-neo-safc-tuning-issues/ note the graphs. Cheers - Dan

stock ecu with a apex neo piggy back heres a link to the sideband I bought - http://www.ebay.com.au/itm/360746100476?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 not sure if its a popular brand or not, but its called "EVO" gauge, I like the seller, and I like the race tech gauges, so I just bought this off him. and yeah I thought it would have came with software/ or at the least instructions, I'll see if that brand has a website and go from there, but thanks for the help guys, and I couldn't imagine trying to make my own board or whatever, however it did come with a sheet with readings like 0v = 10.0 afr 0.25v - 10.5 afr etc etc to 5v = 20.0 afr or something like that anyway. also the r34 uses the consult port, not obdII

So I got myself a wideband gauge and it comes with a 0-5v data logging output, however it gives no information about what software to use or where to get it, so I did a little google search to no avail. I'm asking if anyone use's the function, and if so explain how, like did you make your own usb cable and what software did you use? In my search I did find some software for PC (I have a mac) but it never mentioned anything about a usb cable. also does the software need information form the obd2 plug? Links appreciated! Cheers - Daniel

A few SAU'ers from Geelong are meeting up at the little river BP (melb bound) at 5pm and cruising up to the friday night drags at Calder park, spectator entry is $25, to enter and drag your own car down the 1/4 is $65 and that includes your day license. All thats required is that you don't have any loose crap lying around your car, everything is secured down (amps/subs etc) and that you wear a approved helmet with the aus/nz sticker on it. heres a link for more details - http://www.calderpark.com.au/events/andra-street-meet-street-outlaws-qualifying-round-8-72156.aspx If you'd like to tag along and meet up with us (any car guys welcome) send me a PM or a txt msg 0466 103 384 Cheers - Daniel.

Thats really cool man, If your ever in Melbourne and would like to do a piece on 34's or 33's, with their owners let me know!

Such a shame to hide all your handy work behind the door cards You've done an absolute impeccable job considering it was your first attempt. Coating the MDF in resin = very smart idea, MDF and water just don't mix! again, well done!