Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

I got an EPA letter requesting a noise level test. When I bought the car (R33 GTS-T) it came with a 3" cat back with large cannon tip, don't know what brand if any. Had it tested yesterday and it hit 94dB :domokun: A couple of days later after finding a stock exhaust and getting it re-tested (different tester because this one was near the seller of the exhaust) it's still over!! Yup, stock standard exhaust from front to back and it's reading 96db. I don't get it, how can this be? Has some engine mod been done thats making it noisier than it should be? the exhaust guys suggested putting on an even smaller muffler to further restrict the noise. So i've gone from a 3" cat back cannon to a stock exhaust and now, possible, a smaller than stock muffler, *sigh*.

Is there a way to make the original 3" cat back legal? I really liked the sound, power and look of it.

Still dont understand how the standard 'zorst can be over!

mike

I got a custom made one put on a flange near the end of my exhaust pipe. Chokes the hell out of the engine, runs like crap, sounds even worse. Cant even tell its on at idle. But it came through as legal.

Because its on a flange though I can swap it over at any time in about 10 minutes.

Im guessing your cat may have been bashed out or something as a stock exhaust should definately be legal.

i just tested mine and got 97db tested in carpark facing a tree right next to a main road with heavy traffic. would the environment where it is tested from affect results. i have a dual N1 exhaust that is angled so its conveniently directed straight at the mic and i would assume produces 1.5x the noise. strange cause the higher he reved the quieter the exhaust note got. i am thinking of getting those silencers to whack in my tips....do you guys think this will make much difference?

im thinking of taking it to another place to test with the silencers.

The testers know what the requirements are about surroundings.

Traffic wont affect it. Exhaust noise is a darn sight louder at close range.

I dont think you will drop 7dB at all with just silencing tips. I may well be wrong but i dont like you chances.

7dB is WAY over.

I good way to pass is to put your stock catback on and fill the muffler with steel wool............so i'm told :P

And if the tester asks you if this is a permanet exhaust alsways say yes. A (stupid) mate actually told them that he was going to swap his 3" straight through back on after the test, IDIOT!

And if the tester asks you if this is a permanet exhaust alsways say yes. A (stupid) mate actually told them that he was going to swap his 3" straight through back on after the test, IDIOT!

lol, the tester probably didnt even care :P

yeah i dont like my chances either....weighing up my options, unfortunately this ones though seems too be more epensive and uncertain. i guess i'll just have to put the stocker back on.

In todays day and age you might well be better spending the money now and getting it quiet.

EPA and getting done is simply occuring more and more each year.

Putting a stocker on is all good and well, but i can assure you do it 4-5 times and you'll get sick of doing it :rofl:

Time is money, so initial outlay will save in the long run.

Of course if you prefer the car loud, and can live with the problems cause by it then just go with the swapping.

Bear in mind however, the EPA will note down what system is on the car.

If you get busted by a EPA inspection station (roadside), they will note down the system they bust you with.

If you then rockup with another stocker they know whats going on, and then can fine you if busted after that from what the EPA officer said.

They arent stupid and know most people are swapping items, and hence they keep a record of everything.

I went down there with a 3.5" system and the dude was totally shocked that it almost passed :)

In todays day and age you might well be better spending the money now and getting it quiet.

EPA and getting done is simply occuring more and more each year.

Putting a stocker on is all good and well, but i can assure you do it 4-5 times and you'll get sick of doing it :rofl:

Time is money, so initial outlay will save in the long run.

Of course if you prefer the car loud, and can live with the problems cause by it then just go with the swapping.

Bear in mind however, the EPA will note down what system is on the car.

If you get busted by a EPA inspection station (roadside), they will note down the system they bust you with.

If you then rockup with another stocker they know whats going on, and then can fine you if busted after that from what the EPA officer said.

They arent stupid and know most people are swapping items, and hence they keep a record of everything.

I went down there with a 3.5" system and the dude was totally shocked that it almost passed :)

Ash,

I have heard the threats from the officers down there about keeping records and large fines for repeated incursions, however have never heard of anyone actually recieveing the fine. Have you?

From my experience the EPA keep a (not too detailed) record of what you are running but if they only see you with the stocker it would require the police to keep records also (I have seen the taking engine bay pics but nothing to do with exhaust) and for the two agencies to cross reference the records to prove repeated swaping.

Has anyone on here actually recieved a fine from the EPA apart from throwing ciggies out the window?

When i went there after 2 years from my rego cancellation... to pull the RB25 out

The EPA man there, Lou, had noted down on my "file" that i was 'going' to possibly do a RB26 conversion, i previously had a single 3" system and so on.

To note down that i was *thinking* about a conversion from 2 years prior test was very surprising to me.

So they must keep a fair bit of detail of peoples files/cases

I haven't heard of anyone getting a fine peronally, but ive been told that it has happened by the EPA dudes.

Thats only after they called people back 4-5 times though, not a 2nd offence.

Im not inclined to think he is telling me as a scare tactic as he was quite reasonable with my testing.

(cant go into it here, come to a meet and ill tell you about how reasonable they were with me, despite what people say about em).

I went in with the exhaust I got done with. As mentioned I got a new tip made up thats legal. I keep both so if I go to the track I can put the cannon on. However, if a random cop pulls me over with and sends me out an EPA letter while I have the cannon on, unless he notes specifics about the exhaust, IF I turned up to the test with my primary exhaust on (the legal one), I dont know how they would tell. From what I could see, the cops simply state "youre too loud" without any kind of test, etc. Just off their judgement.

Either way keeping it legal is best. Im quite happy with the setup I have. Once I have spare cash ill invest in a larger exhaust, with less restriction that is legal.

Im not inclined to think he is telling me as a scare tactic as he was quite reasonable with my testing.

(cant go into it here, come to a meet and ill tell you about how reasonable they were with me, despite what people say about em).

Tend to agree with Ash here. I have only been there twice (to pass the one test) and the guys there are very professional, yet still where quite friendly.

  • 1 month later...

My 33 got reported to the EPA twice (1 for noise and 1 for too many air mods)! i have a 4inch HKS Exhaust (it is Bloody Loud) and all i did was put the Stock Factory exhaust back on and it past??? maybe you have a hole somewhere???? i cant see how a full stock factory exhaust would be so far over???

My stock exhaust was 1DB from too loud (but that was because there was a hole) we fixed it and it heap quieter!!! is the Cat and Hotdog in good nick?? that can make it louder if they are gone to the Shit!! maybe take to it a exhaust place and ask them to look at it???

oh yeah just a tip the EPA said its best to have a silencer (coz some wont pass you if you dont), they do make a pretty big difference!!!

I keep the Stock exhaust on for the road and put the HKS back on for Shows only!!! not worth it coz cops dont even have to Pull you over to report you these days!!!!

If you pass an EPA with a silencer in, youll have to weld the silencer to the exhaust so it can no longer be removed. One of the conditions of the EPA. Im sure its been mentioned already somewhere though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...