Jump to content
SAU Community

Recommended Posts

3" turbo back exhaust has not changed my economy in any great way.

post-8679-1186717170_thumb.jpg

Pretty average for me and includes enjoying the improved performance and audio experience, not driving Miss Daisy...

If anyone in Perth wants to borrow the tool I used to get it off - just let me know

but honestly.. they are a peice of cake to make!

oh and.. be extra sure when ( if anyone does buy the custom o2 sensor removal tool ) just make sure if you buy the socket type that its deep enough to fit over the socket.. cause you need one Deeper than most deep sockets..

Oh and.. my update ( after changing the sensor last weekend ) I think its made a BIT of difference . but not a massive difference. but only done 1/4 tank so far.

we got our first country trip this weekend.. so that will be interesting to see what we get out of it

hey thats not actually too bad! heaps better than we are currently getting

3" turbo back exhaust has not changed my economy in any great way.

post-8679-1186717170_thumb.jpg

Pretty average for me and includes enjoying the improved performance and audio experience, not driving Miss Daisy...

  • 2 months later...

Just got my Stagea last Friday, bought it from UK and went back to Germany.

Now it´s the first Stagea in my country, and though I´m quite happy with the car optics, handling etc. I think the auto is just horrible!

It´s a modified RS-Four V, modded by Garage Saurus with RB26 crank, N1 87mm pistons, TD05-18G Turbo, Z32 afm, 555cc injectors and blitz intake + exhaust.

Back from UK to Germany I got 13.5 and 14.5l/100km with cruising at constant 110-130km/h on highways, but the third tank which included city driving just got me about 18.2l/100km!

Since I bought the car as a daily driver this is just horrible, especially since fuel is between 1,38 and 1,51€ here - which is between 2,18 and 2,38 AUD!

Even though the car has dyno proven 416bhp, I can´t believe this figures, car feels a bit like driving with slipping clutch or handbrake pulled all the time...it runs well under full throttle, but not as beasty as I exspected (got several GTR between 350 and 400bhp and a 300bhp GTT to compare with).

Do you guys think a manual conversion will help me on fuel economy?

Just got my Stagea last Friday, bought it from UK and went back to Germany.

Now it´s the first Stagea in my country, and though I´m quite happy with the car optics, handling etc. I think the auto is just horrible!

It´s a modified RS-Four V, modded by Garage Saurus with RB26 crank, N1 87mm pistons, TD05-18G Turbo, Z32 afm, 555cc injectors and blitz intake + exhaust.

Back from UK to Germany I got 13.5 and 14.5l/100km with cruising at constant 110-130km/h on highways, but the third tank which included city driving just got me about 18.2l/100km!

Since I bought the car as a daily driver this is just horrible, especially since fuel is between 1,38 and 1,51€ here - which is between 2,18 and 2,38 AUD!

Even though the car has dyno proven 416bhp, I can´t believe this figures, car feels a bit like driving with slipping clutch or handbrake pulled all the time...it runs well under full throttle, but not as beasty as I exspected (got several GTR between 350 and 400bhp and a 300bhp GTT to compare with).

Do you guys think a manual conversion will help me on fuel economy?

Wow! A Stagea in Germany, that's awesome! Do you have any pictures yet? Be sure to post them up if/when you do.

Your city consumption looks pretty high, but just like any car the best bet is to accelerate smoothly and lightly. With that power, unfortunately, the downside is higher consumption. You have roughly 150HP more than most of us here in Australia generally aim for. Do you know what computer is running the engine - is it a modified factory one or is there a piggy-back unit (or a few extra devices) working on the standard ECU?

I wonder how fast a Stagea really can go, you might well be the person to answer this for us (if yours isn't speed restricted).

Oh, and welcome to the Stagea section of these forums!

Thanks for the warm welcome.

I think car has a ECU remap, and yes it´s unrestricted.

I did not try any high speed runs yet, fastest I did was about 230kmh (GPS measurement - odometer just got the 180km/h scale).

Will maybe try out how fast it gets when I´m around with a friend next time (so he can have a look at the notebook while I drive).

I´ve attached three pics of the car, hope nobody is offended by these off topic pictures...

post-30656-1194304771_thumb.jpg

post-30656-1194304799_thumb.jpg

post-30656-1194304826_thumb.jpg

G`day all i spoke about GAS well the company in perth is call RAGE RACING they are the WA distributor for PROFIRE.look at www.porfire.com.au.hope this is of some help to you all .chuckie.

  • 1 month later...

After replacing my O2 sensor, I have managed to get 600k out of 62L. Mostly highway driving, but a couple of days of town and around also. (Previously got 13L/100k with a busted O2 Sensor).

Works out at pretty much 9.7L/100k for the trip, with a fully loaded boot and a car full of family.

At today's petrol prices for BP Ultimate in NZL, it now costs me $110 to fill from empty at $1.84/L. You guys in Oz are lucky!

Edited by BlueStagea

On my holiday drive Brisbane to Kempsey and back.

10.9 litres per 100km BP 95 (9.10 km/litre)

10.3 liters per 100km BP 98 (9.68 km/litre)

Both runs did the 540km trip in 6 hours overtook anything in my way :)

... and sat on a steady 110km/h in 100 zone and 120km/h in the 110km zone

Stock S1 with Falcoon O2 sensor mod.

Antony

Edited by ant0ny
G`day all i spoke about GAS well the company in perth is call RAGE RACING they are the WA distributor for PROFIRE.look at www.porfire.com.au.hope this is of some help to you all .chuckie.

Seconded!! Chuckie pointed out an R34 at the drags here in Perth that has had a dual fuel conversion done to its Neo and it looks the goods, and the fact that I looked at it waiting in the staging lanes leads me to believe it will go hard too :) I was quite impressed with the overall way it was built, but I rekon the kit would go even better in a stagea due to more room in the back for the tanks(s)

Does anyone know about the economy of the M35 Stag???

is the 3.5 350Z engine better than the 2.5t 25vqdet ????

Cheers

My guess would be the 3.5L 350Z engine would have better fuel economy. Just seems to be more guesswork in getting mixtures 100% accurate in a turbo car.

Stock S1 with Falcoon O2 sensor mod.

so is this falcon o2 sensor a better sensor than the stock one? or is it just that your stock one was faulty and the falcon one is cheaper than a replacement stock one?

3" turbo back exhaust has not changed my economy in any great way.

post-8679-1186717170_thumb.jpg

Pretty average for me and includes enjoying the improved performance and audio experience, not driving Miss Daisy...

I found that my exhaust didn't make much difference until I also got the Apexi SAFC installed and tuned. The biggest difference however was in the ignition timing. Got me an extra 10awkw and noticeably more response and better fuel economy. 13-14L/100km before the tune -> 11.5-12.5L/100km after.

There are now better tuning options than the SAFC however...depending on budget.

Some people have mentioned running these cars on LPG a few posts ago -"chukie" +"sinky rooster" etc.

I thought it fitting that I share my fuel consumption figures that I have so far got with my dedicated LPG Series 2 Stagea Neo engine. (Note - yet to be dyno tuned).

Taking an apples vs apples approach, on the same trip that I do daily, 5 days a week (approx 50% highway, 50% city)

Petrol consumption was approx between 13.5-15.5 litres/100 (98 RON).

LPG consumption is approx between 15.5-17.5 litres/100 (100 RON)

The LPG figure is quite good and was about as expected considering the quicker burn rate of LPG compared with petrol.

I would like to see if the dyno-tuning and/or running on "premuim LPG" (100% propane-105+ RON) will have any change on the fuel economy. The "premuim LPG" is available as I understand from a few select places here in Melbourne metro area direct from the bowser.

To make way for the LPG system, the fuel tank was replaced with a manifold tri-cylinder pack in the same location under the car- thereby not affecting the wagon/cargo space at all which is the way I wanted it.

The car still needs to go back to be properly dyno tuned, to dial in a bit more timing advance as LPG thrives on this, and other final adjustaments but initial indications are that the system fitted performs very well given that there are no performance modifications to the car at all.

The installers/tuners who performed the work specialise in performance LPG conversions- All those sub 12 sec RB30 Turbo Nissan powered VL Comoodores you may have heard about?

PS: Those who do not like LPG are requested not to NEGATIVELY COMMENT as the positives and negatives of LPG have been discussed many times before in the other sections of this forum and their opinions are well documented- Do a search. This thread is about fuel economy.

Some people have mentioned running these cars on LPG a few posts ago -"chukie" +"sinky rooster" etc.

I thought it fitting that I share my fuel consumption figures that I have so far got with my dedicated LPG Series 2 Stagea Neo engine. (Note - yet to be dyno tuned).

Taking an apples vs apples approach, on the same trip that I do daily, 5 days a week (approx 50% highway, 50% city)

Petrol consumption was approx between 13.5-15.5 litres/100 (98 RON).

LPG consumption is approx between 15.5-17.5 litres/100 (100 RON)

The LPG figure is quite good and was about as expected considering the quicker burn rate of LPG compared with petrol.

I would like to see if the dyno-tuning and/or running on "premuim LPG" (100% propane-105+ RON) will have any change on the fuel economy. The "premuim LPG" is available as I understand from a few select places here in Melbourne metro area direct from the bowser.

To make way for the LPG system, the fuel tank was replaced with a manifold tri-cylinder pack in the same location under the car- thereby not affecting the wagon/cargo space at all which is the way I wanted it.

The car still needs to go back to be properly dyno tuned, to dial in a bit more timing advance as LPG thrives on this, and other final adjustaments but initial indications are that the system fitted performs very well given that there are no performance modifications

to the car at all.

The installers/tuners who performed the work specialise in performance LPG conversions- All those sub 12 sec RB30 Turbo Nissan powered VL Comoodores you may have heard about?

PS: Those who do not like LPG are requested not to NEGATIVELY COMMENT as the positives and negatives of LPG have been discussed many times before in the other sections of this forum and their opinions are well documented- Do a search. This thread is about fuel economy.

hmm where should i start on this topc? Well here goes. 3 main fuel categories are gasoline, diesel and LPG. Each type of fuel has it own pro and cons.

Gasoline engine is the mainstream for all car manufacturer since god knows when. Now over the years people have been raising concern over the gas mileage on these cars. Hence all continental cars when down the drain as they as in general suck more fuel compared to the japanese. In terms of power, torque, gasoline engine topped the chart since the muscle car era. until now.

Diesel engine the new type "common rail" has able to match or even some cases surpass the performance of the gasoline engine. Proven by the european car manufacturer such as bmws, mercs, audi ,ford, GM, renault, peugot and citroen. And for the first time the diesel engine has finally matched the emmision and perform far better emission than the gasoline engine counter parts. Its the new GM "duramax" engine which will be available at the end of the year fitted onto the Hummer H3 range.

Now for LPG. Lpg hmm. I think only australia has utilize it in such a big scale. Although other countires have limitted application on it such as taxis and public transport. Lpg engine tend to run cleaner and its good or if not better for the environment. Its cheap to run like what most people said. And thats true to a certain extend. Cost of converting 3k worth? Now in order to make your money back on the lpg conversion, how many liters of LPG do you need to buy in order to make the savings worth while? Say for an example round figures A$15k @A$1.50/ltr. Thats about 10,000ltr. Now say for Lpg@ A$0.75/ltr for 10,000ltr and that equates to A$7.5k. DOnt forget though theres a difference in fuel comsumption between a gasoline and LPG. Lpg tend to chew through faster at about 30%. Therefore 1ltr of gasoline= 1.3ltr of lpg. SO wheres the savings? And the fact is the govt ( ex horward) was going to raise the cost of LPG by A$0.10/year for the next 10 years. So i think we are goin to get suckered by the government to get us to convert our cars into LPGs!!

As fir diesel its out of our league cos we have to get a new diesel car in order to match the performance of the old gasoline cars like the stagea. The diesel cars still have not catch the trend into high perdormance yet. Although the Audis have made an impact on the LE MANS races. We will need a bunch of crazy japanese engineers to make a high performance diesel car!! :down: . then it will be really cool. Just imagine of the high torque that you can get from the car. A mercs 270CDI can generate 400nm of torque and have a low fuel consumption.

Im not having a go at LPG. I was actually thinking of geting another SUV and convert it into LPG but the thought of getting suckered into it by the govt puts me off. Even though the Lpg are a cleaner fuel to burn but i will still have to think about it first.

Although we can use the United boost 98 now. Thats what im using on my 260rs at the moment. :blink:

just my 2c worth of BSing. :D

...so is this falcon o2 sensor a better sensor than the stock one? or is it just that your stock one was faulty and the falcon one is cheaper than a replacement stock one?

Can't tell you if there was a difference with km/litre. The car has done 80k km's and I thought I would just give it a new as I am sure I read somewhere you should change them at 40 or 50k (could be wrong).

I did notice that it seemed to run a little smoother and I have the general feel it was a fraction better on fuel but nothing to back it up.

antony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...