Jump to content
SAU Community

Recommended Posts

Hi all

As you know, I see things most days that some people never get to see - so I thought I'd start sharing them with you (mainly because it's boring in here these days - there's a Big Brother thread for crying out loud?!)

Anyhoo - where appropriate I'll snap things on my trusty phone show you some nifty toys and such.

Starting with...

Lamborghini Gallardo GT3

Very very cool - to be driven by John Bowe in next year's GT3 series. The rear wing is HUGE.

Feel free to share and discuss.

J

post-936-1185857340_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/178833-super-spotted-thread/
Share on other sites

Hehe - we should have a 'spot the P1 car' thread :D

I haven't even driven the SL yet - customers keep taking it out. Big Bird is the resident expert on it!

That Conti is the new Diamond Edition - very nice.

And I love the Alpine! Always wanted one of them. Cookie for who can name the Manga series where a lead character drove one...

Below are from Friday. I spoke to Poite while having a coffee with the lovely red one, and had the yellow one parked next to our F430 while getting the clutch fixed. The Spider is owned by a certain R34 GT-R Z-Tune owner. Has every Carrozzeria option ticked - and is VERY low.

post-936-1185864902_thumb.jpg

post-936-1185864914_thumb.jpg

Lamborghini Gallardo GT3

Very very cool - to be driven by John Bowe in next year's GT3 series. The rear wing is HUGE.

I see alot of exotics come through the freight terminal at work, alot of race cars too, dun normally take photos but might have to start, spotted this in february....

post-14136-1185869252_thumb.jpg

I see alot of exotics come through the freight terminal at work, alot of race cars too, dun normally take photos but might have to start, spotted this in february....

Oh man that is fkn hot!

Have you spotted my car by any chance!? Silver R32 with twin canons, just came in from Japan on Friday lol :)

Customs is taking its time to clear it!

Thanks,

Abu

Oh man that is fkn hot!

Have you spotted my car by any chance!? Silver R32 with twin canons, just came in from Japan on Friday lol :)

Customs is taking its time to clear it!

Thanks,

Abu

I work at the airport :whistling: I presume your car would be coming through the docks?

These cars belong to one persons collection i was fortunte enough to see. and its not even all of them!

The Lambo on the right is an LP640... sooo cool

Image264.jpg

Image261.jpg

Image256.jpg

Image258.jpg

Image259.jpg

I want to be as rich as this guy!!!!! cas damn thats what i call a car collection :(

He almost has more cars than u james crazyyyy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...