Jump to content
SAU Community

Recommended Posts

well, im running 11-12 psi daily with 1.1mm ngk iridiums. so stock coils are very good. as for the coils holding up ive only starting to notice it flatting out around 6kish rpm. cant expect much from them since they are like 12 year old coils and running relatively large gap for 11psi.

Edited by philta
well, im running 11-12 psi daily with 1.1mm ngk iridiums. so stock coils are very good. as for the coils holding up ive only starting to notice it flatting out around 6kish rpm. cant expect much from them since they are like 12 year old coils and running relatively large gap for 11psi.

i dont see that there is nothing wrong with stock coils unless they are buggered already, so a change is in order..

i was running 14psi on 1.1 gap plugs no problem, i dont see what the craze about gapping plugs is, but then again i dont race my car.

Don't agree with this statement. All the stuff I've seen from China has been lower quality than the Japanese made stuff. 1/2 the price for sure. And China may make thousands of motorbikes but not that many make it into Australia.

i never said motorbikes. i am talking bicycles. i work in the bike industry and i have compared US made stuff as well as taiwan and china made stuff and you can't really tell a difference. i know a guy that imports carbon/alloy bmx forks. they are identical to a big name brand. his get made on the same production line, made to the same specification. they are made at the exact same time, they just don't have the brand name sticker put on them. he retails them at under half of the retail price of the brand name ones.

all the chinese made motorbike stuff is crap cause they just want cheap crap, they don't care too much about the quality.

i was running 14psi on 1.1 gap plugs no problem, i dont see what the craze about gapping plugs is, but then again i dont race my car.

it isn't a craze. it is something you HAVE to do if you want to be able to drive your car without a missfire when your coils start breaking down. but you don't have to do it unless your coils are breaking down. i only did it because i got a missfire.

im runnin 14psi with 1.1gap on my platnum plugs.. no problems here.. i had a misfiring once.. but it wasnt the coils.. was the stupid igniter module.

OEM coils r fkn awesome but cost more.. and im sure theres a reason they cost more :D

cant compare 14yo coils to brand new splitfires and JJR's... i reckon the OEM coils out do those other brands anyway..

its what they raced with years ago (brand new coils thou) and didnt have problems.. but i guess when u have 14yo coils and u need new ones, and the OEM's r just too far priced.. best alternative would be splits or JJR's...

I've just purchased a set of the JJR ones, hella cheap at $399, i have a missfire of sorts, hopefully these fix it

Is it worth replacing the wiring harness that goes to the packs? Are these prone to having connection problems?

cheers

I've had the JJR coilpacks in for a month and they have changed how my car drives completely, well worth the $400 spent (but not much more), smoother, revs cleaner, no more 'skyline miss'. They replaced my factory ones that would be pushing 18yo. The way i look at is this; 'if the standard ones lasted 18 years and still worked OK after 150K's, why the f#ck do i need ones that are going to last another 18 years and 150K's? Seriously, if im still driving my dirty poo in 5 years time there ain't gonna be much left of the car thats original, i don't want to be driving round a car over 25yo as my daily. Who can seriously say that they want to be driving their skyline as a daily after another 150k's on the clock, sorry for those that might but i wouldn't.

Good on JJR for bringing some competition to the market, it's about time we stop getting held for ransom forced to pay $600 for splitfires. 5% of my cars buying price on coilpacks doesn't make sense, they ain't going to make my car any faster compared to $600 spent anywhere else on my car. I find it interesting that Splitfires dropped $100 over night it seems, (or did they drop in price to $500 before the JJR packs were released?) either way it goes to show how much of a mark-up somebody is making along the line, i have closely inspected both and there is nothing wrong with the fit and finish of the JJR ones, im not saying that quality is determined by how something looks, but.... having worked in the R&D and design of industrial injection moulded plastics I would reason that you wouldn't spend soo much capital on the die's to make these parts if you weren't going to use quality materials in the rest of the product. I couldn't see any hints of 'dodgy knockoff' in the choice of materials or quality of manufacture on any of the packs. One thing i did notice however is that the JJR ones don't have the little graphite ceramic contact thingy that my factory ones had attached to the end of the spring that sits on the plug, im not sure what they do or if they are important for logevity to stop corrosion over time but im pretty sure not all factory skyline coilpacks have those anyway, i don't plan on keeping the car for long enough to find out, and with a 12month Australian waranty then you would have to really think hard to justify the extra money on a set of Splitfires.

Just my 2 cents...

Interesting topic... I have to replace my coils soon and the jjr ones are looking good.

i have a jjr split front/dump and am very happy with the product.

as far as heat resistance goes... i wonder how the JJR coil packs go under heat, i mean long term... from what i understand coil packs can crack under heat over time and under the coil pack cover heat gets trapped. But at the same time you can modify your cover by putting vents in to let heat escape i suppose...

but then again as mentioned above if the OEM ones last the time they have, we dont have to worrie about long term effects on the coil packs once they are bought brand new...

when you have the cover on, when moisture gets in it doesn't get out very easily. any water that gets in will just turn into steam and most of it will stay in there, then when the car cools back down it will just condense on everything. no cover means that any condensation that gets in gets out just as easy.

plus it means next time you want to take your plugs out you don't have to take off your cross over pipe. just unplug the coils, undo the 3 or 4 bolts that hold the coild pack holder bracket and lift the coils out in lots of 3.

i had to degrease my engine so i put my coil cover back on. i splashed the top of the motor a bit but not much. when i went to drive it i discovered that half the coils were covered in water. took the cover off, used a rag to soak up as much of the water as i could and then just let the car run until it was all boiled off.

next time you have your coil pack cover off lean over the motor and look towards the front of the car, you will see these little louvers that vent between the area under the cam cover and the area between the cylinder head that the coil pack cover seals up, any type of venting of the coil pack cover or leaving it off is bad news for the longevity of your cam gears/belt and other pulleys that reside behind your cam cover. That area is not meant to be vented to the dusty turbulent environment under your hood. That area is meant to stay sealed, unless you can figure out a way to stop dust getting into that area under your cam cover i would only be taking my coilpack cover off on the track if you plan to drive your car daily and save your coil packs, if anybody else has an opinion on this i would love to hear it,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...