Jump to content
SAU Community

Recommended Posts

Yeah I was trying it with the clean grip - I've never done cleans or any other Olympic lifts before either!

I'll try the arms crossed one, I thought it was bad for you though. Failing that, I'll invest in some straps, since the hand placement isn't an important part of the movement

Use a Smith machine to figure out which grip works for you. I'm going to start front squats soon and that's what I plan on doing first.

No way I'm going to try arms crossed with a barbell first time round. Might kill someone

Safety bar squats are somewhat similar to front squats in that the weight is out the front of you a bit. I am doing them at the moment because I have niggling ac joint issue and front squating with the bar on it in the rack position hurts.

Well an empty still weighs 20kgs and isn't restrained, so if you don't have it sitting right and it falls you could injure yourself or others I guess (and look like the tard that dropped a bar..)

Smith machine with 10 a side to start, once I get familiar with it move up to barbell.

Front squat focuses on the quad right?

Also, what program do you suggest to really stimulate calf growth? I'm finding that the arches of my feet start going before my calves so not getting the most out of it. I'm considering taking skipping back up to develop some conditioning on rest days and then high volume sets on leg day.

Comments?

another technique to stretch your arms out to improve front squats is:

assume the front squat position with arms under bar and elbows forward

have friend stand with their shoulders under your arms and slowly stand up

i get my mates to do it, main drawback is theyre both 6ft6 and im 5ft 10

another technique to stretch your arms out to improve front squats is:

assume the front squat position with arms under bar and elbows forward

have friend stand with their shoulders under your arms and slowly stand up

i get my mates to do it, main drawback is theyre both 6ft6 and im 5ft 10

sounds very broke back mountain.

which part is difficult boz?

Elbows up?

thoracic extension of the upper back?

shoulders not able to come forward enough?

video it

all fingers under is fine if you can.

but it requires more wrist flexibility.

the first 2 fingers makes it easier,

They are not there to hold the bar really.. just to anchor your hands somewhere so you can push the elbows UP.

and yes..

right up in to your throat.

I get my fingers where I want them, then the feet under, then swing one arm under, then the other as I put my head right back so the bar is right up against the part of my throat and clavicle meet.. then bring my head down.

as you stand up and have elbows up, the bar ends up sitting on your front delts rather than the clavicle.

then it's a big breath in, chest/elbows up, back arched, and squat down between the heels.

This shows where I mean by on the throat/clavicle.. ignore that his hands are not on the bar.

hands-free-front-squat.jpg

and what I mean by 2 fingers..

kasi_front_squat_low_res.jpg

Edited by TTT

Its defs a fine line between cutting off air supply/blood flow and finding the right spot for the bar. If you find it hard to keep elbows up, wait til you start squatting with it.

I get just as mucg of an upper back workout as legs doing them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...