Jump to content
SAU Community

22" Forged On A R35.... "droooooolsssssss'


Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

EDIT: Sorry, I should have written my original post a little differently

Expect a LOT more of this... baller is the way to go to sell cars these days. The 300C was the first car to sell itself on big diameter wheels tyres, Nissan have just copied a winning idea.
I really would have thought that with the size of the brakes on the R35 Nissan wouldnt have had any other choice than to fit 20s to it...
V8 Supercars run 370mm rotors under a 17" wheel so I don't think you would really need to go an extra three inches for a 380mm rotor.
Nissan has copied jack shit. There's a performance reason why they went for 20's, like there is a performance reason Porsche went with 19's for the 997 Turbo. They're not thinking, geez, this will get me in the good books with 50 cent :D
Whether we like it or not, it is important that 50 cent likes it because what 50 cent likes, America likes. Think about the slogan for the car "NEW NISSAN GT-R: THE 21ST CENTURY SUPERCAR FOR ANYONE, ANYWHERE, ANYTIME". This includes South Beach, the Sunset Strip AND Laguna Seca. Porsche knows this as well as anyone.

22-inch wheels and Automatic transmissions sell the car to 50-cent. Nurburgring laptimes and split second gearshifts sell the car to performance enthusiasts like us. It is marketing genius and the only reason that this car exists at all.

Edited by Laurence

V8 Supercar = 17x11" rims.

Cant wait to see the first suicide or lambo door conversion :D ......makes me want to suicide just thinking about it.

Hmm 40kg 22x5" rims with spinners and air bags no doubt, im sure they will make the car handle really well....or not

Why not just airbrush the f**ck out of it as well and completely wreak the car

Edited by zebra

The white is definitely a no, the grey one with the dark grey centre looks good...............probably wouldn't look good in black centre but grey/dark silver is awesome iwht polished lip

I stood and stared at that white R35 at Tokyo Autosalon for some time, wondering if the owner got confused and thought it was a 300C.

Slammed with 22 inch chrome wheels and a massive audio system in the boot was not the intended mod path for the R35 GTR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
    • Wrinkle black will be a thing for both
×
×
  • Create New...