Jump to content
SAU Community

Recommended Posts

Hai guise, probably will be changing my oil tomorrow :].

From reading various pages of this thread, I have come to believe Sougi is the way to go :O.

But M5000 is no longer made (neither is S6000 which seemed more than I need anyway?), so I'm thinking of using Syn-X 3000, 10w40? Car is R34 N/A btw. Would this be sweet?

Ty for any advice :cheers:

do the syn-x 3000, for $35ish you can't go wrong

do the syn-x 3000, for $35ish you can't go wrong

Hi, Im newbie to this forum and to skylines in general, I have an R33 S1 - RB25DET and its running low on oil, I would like to know whats the best oil to use; to keep the engine running good and to make the engine run nicer, i want good quality oil for my skyline as the engines not the best atm and needs some TLC to make it happy again.

I understand, i should read each post and make my own decision, but I am asking for actual first hand responses from people who own an R33 and auto and to keep it running long term.

do the syn-x 3000, for $35ish you can't go wrong

Hi, Im newbie to this forum and to skylines in general, I have an R33 S1 - RB25DET and its running low on oil, I would like to know whats the best oil to use; to keep the engine running good and to make the engine run nicer, i want good quality oil for my skyline as the engines not the best atm and needs some TLC to make it happy again.

I understand, i should read each post and make my own decision, but I am asking for actual first hand responses from people who own an R33 and auto and to keep it running long term.

running low on oil is not good, if its running low you probably have bigger problems to worry about

...so just just get anything 10-40..ask the guy at the shop they will tell you..then if it burns through it too quickly try a thicker oil..like 10-60 castrol edge or something

running low on oil is not good, if its running low you probably have bigger problems to worry about

...so just just get anything 10-40..ask the guy at the shop they will tell you..then if it burns through it too quickly try a thicker oil..like 10-60 castrol edge or something

HI, i just got the car and checked the dipstick, the car was cold but it looked low on the stick, and ALOT of ppl have been talking about needing to use a certain type of oil and consistency etc, ive heard castrol and shell helix is shite? but as long as its 10-40 or 10-60 should be fine, just thought it needed to be GOOD brands

not much use using good brands if its burning oil..

edge and helix are ok for the money ..id try one of them first..get a 10-40 do an oil change and keep an eye on it, if it burns oil then get a thicker 10-60 oil..if it doesnt burn oil then stick with a 10-40

or dont worry and just put a 10-60 in it..

I wouldn't bother topping up whatever oil is in there, I would do a oil change + filter and put new oil in, a decent 10w40 (is what you want for any RB) semi-synth like motul 4100 turbolight (lots of people have success with this one) or the cheaper gw syn-x 3000 and keep an eye on oil use. Only then if it's still burning through oil, it might need looking at (compression tested etc), going up to a 15w50 or 10w60 might prevent the oil use, they just aren't ideal for a street driven RB.

I wouldn't bother topping up whatever oil is in there, I would do a oil change + filter and put new oil in, a decent 10w40 (is what you want for any RB) semi-synth like motul 4100 turbolight (lots of people have success with this one) or the cheaper gw syn-x 3000 and keep an eye on oil use. Only then if it's still burning through oil, it might need looking at (compression tested etc), going up to a 15w50 or 10w60 might prevent the oil use, they just aren't ideal for a street driven RB.

Hi, again thanks for the advice, but I am unsure who it was that looked at my car and told me the oil was low :P I just looked this morning before I went out, and the dipstick is full oil like 6inchs along the dipstick except its darker then brown, close to black, in saying that I believe it would be due for a service and change! BUT isnt it true that MOST service centre put crap oil into the car like semi synth? anyways I went to my local repco and they actually have BOTH Motul 8100 Xcess & Motul 300V chrono which I believe are the best oils on the market for my RB25DET.... I want to get a service done but use these oils to fill the engine and then continue to use them as I have heard good reviews.

thanks, on the other hand my auto trans fluid was low so I put some more into that and see how it goes, I now know it must be DEX III not the other crap as I was told by the service guy at repco based on the books he has for the RB25DET.

thanks again, if ANYONE in Adelaide knows of a good place for service prices and reliability do tell. OR feel free to offer your services as I am not a mechanic in anyway shape or form I am WEST SUBS of ADEL

^ hey bro, having too much oil can be just as bad as not having enough. Wipe your dipstick, then re-dip to take a reading. Make sure your car is on flat ground.

Too much oil and your crank can start churning the oil, filling it with air bubbles. These will make their way to your pickup and your contacting surfaces will not be getting that constant feed that creates a protective film. 6 inches up your dipstick is not healthy if it's a skyline dipstick!

anyways I went to my local repco and they actually have BOTH Motul 8100 Xcess & Motul 300V chrono which I believe are the best oils on the market for my RB25DET

So go buy the 8100 xcess and put it in.

thanks again, if ANYONE in Adelaide knows of a good place for service prices and reliability do tell. OR feel free to offer your services as I am not a mechanic in anyway shape or form I am WEST SUBS of ADEL

Check the SA section for a list of workshops, why don't you just do it yourself though? Changing oils, plugs, filters etc is a piece of piss. It is like 1 bolt for the oil.

Check the SA section for a list of workshops, why don't you just do it yourself though? Changing oils, plugs, filters etc is a piece of piss. It is like 1 bolt for the oil.

If I can manage changing plugs, fuel filters, oil filters, oil, etc - anyone can.

Really, for basic servicing like this, not doing it yourself is just silly.

not much use using good brands if its burning oil..

edge and helix are ok for the money ..id try one of them first..get a 10-40 do an oil change and keep an eye on it, if it burns oil then get a thicker 10-60 oil..if it doesnt burn oil then stick with a 10-40

or dont worry and just put a 10-60 in it..

If it burns a poor quality 10w40... but a better quality 10w40 in there.

Example - My wife's Magna burned Nulon 10w40. ~6000kms after I serviced it she noticed a burning smell so I checked it and dumped the oil.

Only 2-2.5 of the 5L came out.

Have mainly used Valvoline 5w40 since (sometimes Mobil 1)... no burning at all and 99% of what went in comes out.

Hi, again thanks for the advice, but I am unsure who it was that looked at my car and told me the oil was low :P I just looked this morning before I went out, and the dipstick is full oil like 6inchs along the dipstick except its darker then brown, close to black, in saying that I believe it would be due for a service and change!

Hope you checking your oil hot!

Can change level on the dipstick considerably if ya check before you drive

as opposed to once its up to temperature.

Hi, again thanks for the advice, but I am unsure who it was that looked at my car and told me the oil was low :P I just looked this morning before I went out, and the dipstick is full oil like 6inchs along the dipstick except its darker then brown, close to black, in saying that I believe it would be due for a service and change!

Hope you checking your oil hot!

Can change level on the dipstick considerably if ya check before you drive

as opposed to once its up to temperature.

Hi, again thanks for the advice, but I am unsure who it was that looked at my car and told me the oil was low :P I just looked this morning before I went out, and the dipstick is full oil like 6inchs along the dipstick except its darker then brown, close to black, in saying that I believe it would be due for a service and change!

Hope you checking your oil hot!

Can change level on the dipstick considerably if ya check before you drive

as opposed to once its up to temperature.

Hi, again thanks for the advice, but I am unsure who it was that looked at my car and told me the oil was low :P I just looked this morning before I went out, and the dipstick is full oil like 6inchs along the dipstick except its darker then brown, close to black, in saying that I believe it would be due for a service and change!

Hope you checking your oil hot!

Can change level on the dipstick considerably if ya check before you drive

as opposed to once its up to temperature.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...