Jump to content
SAU Community

Recommended Posts

if its one thing ive learnt from owning a skyline, you cant go buy cheap shit like that, its generic repco stuff, you aint driving a commondor or ford anymore, these cars are performance!! I used to own a commondor and the oil was like $20 but now owning a skyline I get the good stuff $65 5litre bottle of 4100 MOTUL, you cant run cheap semi synth in ya RB, thats just a heads up, even if you do, you will probably have to change it more often

i wonder how all these RBs managed to survive the 80s and 90s where even the best oils werent as good as your average semi synth is now. as zebra said its not a F1 engine.

the gtx2 i used to put in my old rb30e was so shit it made noticeably more power after an oil change (only 5000kms), was still going strong after 400 000 k's of being abused.

paying any more than $50-60 per change for a street car with a stock motor is a complete waste. track work and built engines is a different story.

300V chrono is probably motul's best oil (and expensive) for our cars, definitely on par with Amsoil's Group V oils, maybe even better.

Amsoil oils are Group IV. They do not have a Group V oil... as told to me by a number of Amsoil dealers (AUS and US) and by Amsoil themselves.

  • 2 weeks later...

Have some Syn-X-6000 on order at the moment, which is a 5w40 full synthetic and technically Sougi's replacement. Will try it in my car and let you all know how it goes compared to Sougi. Shame it's a 5w and not 10w, but am told the difference between both of these start up viscosities is somewhat negligible and some companies actually get away with selling their 10w oil as a 5w anyway. Will also let you know the composition (group 4/5 etc.) and cost.

i wonder how all these RBs managed to survive the 80s and 90s where even the best oils werent as good as your average semi synth is now. as zebra said its not a F1 engine.

the gtx2 i used to put in my old rb30e was so shit it made noticeably more power after an oil change (only 5000kms), was still going strong after 400 000 k's of being abused.

paying any more than $50-60 per change for a street car with a stock motor is a complete waste. track work and built engines is a different story.

Because they were brand new engines? This is pretty poor logic IMO. It's okay to suggest that cheap oils won't hurt the engine, but I don't agree with you saying expensive oils are a complete waste. How did we survive in the 80's and 90's with slow computers, 486s and Pentium 2s...why not use these today? Because advancements have been made and you get better performance out of modern technology. Yes a mineral run of the mill 20w50 won't kill your RB engine, it will run on it all day long, but that doesn't mean a synthetic 10w40 with better additives won't be better for it. My mother couldn't tell you the difference between the feel of two different oils...but then, she can't hear the creak I have in my coilovers either. Some people are more in tune with their vehicles and aren't happy if it doens't feel right.

You won't kill an engine with a shit oil, but it will perform better with a good one and certainly feel better when you're driving it.

exactly. im not saying it doesnt make any difference, im saying for your average stocker motor spending an extra $50 per oil change simply isnt worth it when the motor is only work $1000, if that.

Well I get my oil for free so that's no issue for me, but if I was paying for it, I'd have no hesitation running an expensive oil. It's not a question of price though, it's quality...look how many people turned from 300v and other expensive Motuls to Sougi, which was half it's price. People are happy to make the switch to a cheaper oil as long as it performs the same, reality is they don't all perform the same. Feelsgoodman.jpg and you can't argue with subjective opinion on the feel of something :thumbsup:

Im using a oil from one of our WA members who works for united oil. He uses it his race car and I have not had a problem with it it's a 5w50 and I have a he'll of alot better pressure at oil and has not broken down like my mibil1 did in about 1000kms

I put USED skyline oil in my barina lol, I never dump the oil, I just keep topping it up and it burns it. Put about 10L in there in the last 6 months.

lol... i do the same in the mrs's golf

  • 2 weeks later...

This thread just goes around in circles wacko.gif Ive done one oil change in my Rb20 so far and i used Castrol Edge 25-50, prob a bit high considering it was rebuilt a few years ago. Not sure what the last owner used but im thinking of going fully syn, i guess 5-30 or something next.

Going from one extreme to the next wont affect the engine to much or at all? It is only a daily, no track, just the odd blat and whip here and there.

I read on google somewhere that Mobil ! has deteriorated over the last few years and is no longer one of the top performers as they are about making money not quality oil and Castrol has boosted advertising like there's no tomorrow stating they are the best... Not to sure about that

  • 2 weeks later...

+1 for Amsoil AMO 10w40 fully synthetic. Amsoil filters are pretty good to from what I have read & heard I use those when I can...

Although currently running a Drift magnetic filter which are also good (there is a thread on here somewhere about them)

I get all of this stuff from a mob called Lubrication Management who live this shit. It is all they do is sell and analyse oil... mainly for race teams

They were horrified that I was running Castrol Magnatec when I first rocked up and they made me flush the old oil - Jesus you should have seen the shit that came out!

If track your RB regularly a top quality oil & filter is an investment. Don't listen to some of the muppets on here that don't have a clue :huh:

Haha, not that I disagree with you regarding Amsoil oil and filters (have used both in the past), but you used Magnatec, then took your car to an Amsoil dealer who recommended their product (shock!), it was better than Magnatec (even greater shock!!) and you come in here to call others in this thread "muppets that don't have a clue".

Please.

Whilst Amsoil are a good oil, perhaps you need to do some research for yourself instead of just believing the first lubrication professional you speak to outside of Autobarn/Supercheap/Repco.

I agree with the above. Magnatec is the ass end of motoroils. just google "magnatec sludge"

If you actually read the thread at all before calling us muppets, you would have known there is a cheaper source for Amsoil... http://performancelub.com/Amsoil%20pricelist.htm

No actually my (very) ex-mechanic used magnatec in my car...

And I chose the dealer/specialist in question because I had done my research and had decided on Amsoil for my vehicle.

I wouldn't ask Autobarn/Supercheap or Repco for the time of day let alone advice on oil

You make alot of assumptions.

I wasn't calling everyone a muppet just those that were dispensing poor advice and making too many assumptions :rofl:

Haha, not that I disagree with you regarding Amsoil oil and filters (have used both in the past), but you used Magnatec, then took your car to an Amsoil dealer who recommended their product (shock!), it was better than Magnatec (even greater shock!!) and you come in here to call others in this thread "muppets that don't have a clue".

Please.

Whilst Amsoil are a good oil, perhaps you need to do some research for yourself instead of just believing the first lubrication professional you speak to outside of Autobarn/Supercheap/Repco.

I'm not trolling just sharing my experience. I read the thread and I'm well aware of the PerfomanceLub website also thank you.

I certainly wasn't calling everyone muppets just those that appear to be offering expert advice on lubricants when they clearly don't have a clue (there are numerous examples in this thread which I'm sure I don't need to point out to you).

My appologies for any offence caused to those that don't fall into this category.

I agree with the above. Magnatec is the ass end of motoroils. just google "magnatec sludge"

If you actually read the thread at all before calling us muppets, you would have known there is a cheaper source for Amsoil... http://performancelu...20pricelist.htm

Yesterday i tried Penrite HRP full synthetic 10w50 in my Neo RB25DE, it was using 10w30 Valvoline Synpower before that. The engine seems to approve and the oil pressure seems more stable then before, probally due to the change to a thicker oil.

This has probably been answered in the 124 pages but i aint oging to click on each one to find my answer as it will take forever,I have an R32 GTR 1994 RB26DETT, with an Oil cooler + Oil filter and has been relocated. How many litres on oil should i putting in i have got different answers from diffferent people some say 5 some say 5.8- 6L which is the correct amount? My car is also modified, 330AWKW dont know if that makes a difference, But all internals are stock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...