Jump to content
SAU Community

Recommended Posts

It's new and should be around for a lot longer than Sougi was, depending on how well the oil sells. I'm anxious to try it in my line but waiting for service interval (not wasting my precious S6000 lol).

If anyone wants to give Syn-X 6000 a shot and can't get it from their local distributor/Autobarn, I can post by the box (4 bottles), which should be pretty cheap. Will start selling it on eBay anyway so keep an eye out on there. Mechanical workshops rave to me about using Syn-X 3000 (10w40) in all their customer cars, so if you want a good semi synth on a budget, you can always chuck that in.

i should try the syn-x 3000

i should try the syn-x 3000

its not bad, i use it in my stagea now

its usually pretty dark at 5000 kms like sougi was, but its so cheap that i don't feel bad changing it at 5000 kms

  • 2 weeks later...

:D

OHtmKzHX_original.png

Will throw it in the Skyline over the next couple weeks. Wish the 5w was a 10w, what with summer and everything, but should still be fine (have read that 5w and 10w are negligible in difference and companies often market one as the other etc.). I assume it is a group 4 fully synthetic, given GW said they weren't doing anymore esters. If anyone wants to give it a go I should be able to supply for $55/bottle (plus postage or you can pick up) until further notice, which is still good value for a group 4 synthetic and cheaper than what Sougi 6000 used to cost. It's also an SN/CF, which is the latest specification in the oil industry.

55$ is a bit rich..

Birds can u tell me why this^^^ is any better than this which is only 40$ a bottle at any auto store??

http://www.penriteoil.com.au/products/engine-oils/hpr/hpr_10_full_synthetic

55$ is a bit rich..

Birds can u tell me why this^^^ is any better than this which is only 40$ a bottle at any auto store??

http://www.penriteoi..._full_synthetic

It is a higher group oil I think. I'm not 100%

End of the day for what you are doing it probably isn't any better, but you will have the peace of mind of using a better oil.

  • 2 weeks later...

Hi guys,

I just bought a R34 GTT RB25 NEO over the weekend and drove it up from Brisbane to Cairns.. in the storm :S

I want to get the car serviced, it was a 1700km drive & I want to look after this baby as much as i can :)

I live in Cairns, my vehicle is parked under my complex so we dont really get cold starts or anything here.

Can anyone recommend me a good engine oil? There is 126 pages in this thread, I started reading the 1st few pages then realised that was back in 2003.

This is just my daily driver, I do like to go fast ofcourse but I am not a racer & wont be putting it on a track.

Im hoping somone can lend me a hand.

Cheers,

Shaft

How much are you willing to spend on an oil change?

How much is standard? I mean I dont want to overspend on what is required.

I just wanted to get some ideas of what brand & mix to use. I think grade 3 is what im looking for, but the 10w 5w etc just goes over my head =/

Ok just did alot of reading up on this thread, and apologies for asking noob questions.

Sougi sounds pretty good from what I did read, the S 6000 is now off the market and the SYN-X 6000 is the replacement. I called the GW number and found auto 1 to be the local distributor. $49.95 for 5L

Will give this a run :)

  • 2 weeks later...

My first oil change in my 33 I used Penrite HPR10. Not knowing about these forums, I had asked in Autobarn and that was what was recommended. Short story, but I did not like that oil. The oil pressure gauge stayed up high way longer before it would normalize to it's proper running setting. The car felt a tad sluggish and after awhile I could hear the lifters or something making noises in the engine. HPR10 is a 10w50 oil and on paper shuold be ok in an RB. My experience told it it wasn't. Once I dropped it and put in some Sougi S6000 the car never felt better. Still using the S6000 and I think have 3 bottles left now :).

Not all oil are the same, but different brands can't even get the same weights either. A 10w in Penrite felt like a 20-30w in another brand.

Birds that new Syn-X 6000 looks interesting. Not so happy about it being 5w though. I think it should have been a 10w40 oil as it's still going to be competing with the Royal Purple, Motul 8100 X-max 10w40 and the Chrono 300V. It's not a bad replacement for Sougi S6000 but it's annoying that yet another oil comes in a 5w40 only with no 10w40 option.

Yeah i got the hpr 10 in now..I've noticed my oil pressure stays a little high too, pretty much constantly on the 3/4 mark..only drops when idling..not sure if it feels sluggish cause I have 30kw extra now :P

I reckon it could handle some abuse but def not as nice as the motul it replaced..was half the price though and is SN rated..

Yeah i have the hpr 10 in now, def not as nice as the motul it replaced..oil pressure stays up around 3/4 mark except on idle when it drops to half..

But i reckon it could handle some a use and it was half the price and is SN rated...i can't comment on if it feels sluggish cause I gained 30kw the same time I put it in..sorry Rolls ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...