Jump to content
SAU Community

Recommended Posts

holy moly! $60K for some seats, wheels, exhaust, suspension, diffuser and badges? son of rajab give me strength. The crazy part is people will actually buy it!

not a big fan of the crease along each spoke of the wheels. I do love the seats though, they are awesome.

The exhaust I'm not sure on yet, need to think on that one. but still $60K and not even an ECU or boost up? $60K get's you 3/4s of the way to another R35. In fact in japan for $60K you could almost buy an R32, R33 and R34 GTR and complete your collection...hmm seats and rims or 3 new cars....

more details

http://www.nismo.co.jp/news_list/2008/news_flash/080005.html

the price inc all parts and labor to install parts

Also it comes with a 3 year or 60,000km warranty :laugh:

edit: more nismo parts: http://www.nismo.co.jp/news_list/2008/news...h/080005_1.html

Edited by [Michael]

Nismo GT-R Tuning Parts - Packaged Parts Specifications

Source: Nismo via GTRBlog.com

Images: Nismo via GTR-World.net

20080829-nismo-club-sports-package-02.jpg

While you can opt for the Nismo Club Sport package at 5,460,000 yen there is also the an option to go with the sub packages themselves. Especially handy if you don’t have the full $50k lying around. There are three packages that make up the greater Club Sport Package. These are explained below:

20080829-nismo-club-sports-package-03.jpg

First up is the Chassis Package which includes Nismo developed Bilstein Damptronic suspension and the Rays forged aluminium 20″ monoblock wheels and Bridgestone Tires. This package cannot be split down any further unfortunately unlike the Club Sport package itself. Specifications are as follows:

Tires:

* Size: Front 255/40 ZRF20 - Rear 285/35 ZRF20

* Manufacturer/Model: Bridgestone RE070R (Runflat)

Wheels:

* Manufacturer: Rays Wheels

* Construction: One piece forged aluminium

* Size: Front 20 x 9.5J +45 - Rear 20 x 10.5J +25

* PCD: 114.3, 5 hole

* Weight: Front 10.3 Kg (-1.6kg) - Rear 10.8Kg (-1.4kg)

* Appearance: Gunmetal Grey, Nismo Logo, Nismo valve caps

Suspension:

* Dampers: Bilstein Damptronic (3 mode switch compatible)

* Appearance: Black, Nismo logo

* Springs: 18.5kg/mm front spring rate, 9.6kg/mm rear spring rate

* Appearance: Red, Nismo logo

Price: 2,205,000 yen

20080829-nismo-club-sports-package-04.jpg

Next up we have the Carbon Bucket Seats package featuring the Nismo badged Recaro leather clad carbon fiber race seats.

Specifications:

* Construction: Seat shell carbon fiber, leather wrapped

* Appearance: Nismo embroidered logo, Recaro logo

Price: 1,890,000 yen

20080829-nismo-club-sports-package-05.jpg

And finally there is the Titanium Exhaust System package featuring a lightweight super sexy titanium exhaust and carbon fibre ducted rear diffuser to replace the standard rear diffuser.

Specifications:

Exhaust:

* Construction: Titanium Alloy, Titanium

* Size: 70mm main pipe diameter, 124mm x 275mm x 2 outlets (elliptical)

* Features: 5kg lighter than standard exhaust

Rear Diffuser:

* Construction: Carbon fiber, Aluminium

* Features: NACA Cooling ducts

Price: 1,890,000 yen

20080829-nismo-club-sports-package-01.jpg

Agreed. The lips on the wheels makes it look smaller than it actually is... urghhh...

It's probably the thick side walls on the run-flat tyres that give that look.

Nismo's never really been the cheap option for tuning, but I think they've totally out-priced themselves this time... The parts look good though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...