Jump to content
SAU Community

Recommended Posts

:glare: Rumour or Fact?

The M7 already has Point to Point Speed Devices being tested atm.

So as your E-Tag enters the M7, a photo is taken of your vehicle. Another is taken at exit. And if your average speed is deemed to be over 102Km/Hr, you get a speeding ticket.

The same system is being installed & ready for testing on the M5.

The Pacific Hwy is earmarked for the same.

Link to comment
https://www.sau.com.au/forums/topic/258950-m7-m5-point-to-point-speed-devices/
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Wow this sucks as I too have heard this rumour. Apparently its quite common in a lot of the European countries.So i guess if you have been dialling up some big numbers on the speedo,pull over and relax for 5. Anything about the M4 ? As there are these rather odd looking boxes with cameras in them if you are heading westbound just before prospect Hwy exit. I dont know what they are. they seem to have a red glow inside them at nighttime

:glare: Rumour or Fact?

The M7 already has Point to Point Speed Devices being tested atm.

So as your E-Tag enters the M7, a photo is taken of your vehicle. Another is taken at exit. And if your average speed is deemed to be over 102Km/Hr, you get a speeding ticket.

The same system is being installed & ready for testing on the M5.

The Pacific Hwy is earmarked for the same.

gee terry......you always seem to come up with things to SCARE us!!!!

Highly possible and is somthing i have been saying since it first opened, they know when you get on when you get off

how far you've gone and how long it took, but not in force yet as under NSW law they have to let you know of possible

speeding fines. I believe those cameras are the same as the one's on GWH at M7 under pass and are for noise polution

but don't quote me on that.

it was supposed to happen on the M4 3 years ago. It never did. That's why the extra cameras were installed.

And in NSW any speed camera (even the mobile ones) must have a warning sign. It's the same with the heavy vehicle ones on the freeways. They have to be sign posted.

Until you see the signs go up there's nothing there.

terry, you're one paranoid unit...

it was supposed to happen on the M4 3 years ago. It never did. That's why the extra cameras were installed.

And in NSW any speed camera (even the mobile ones) must have a warning sign. It's the same with the heavy vehicle ones on the freeways. They have to be sign posted.

Until you see the signs go up there's nothing there.

terry, you're one paranoid unit...

Now Now Behave - you must never kill the messenger hehe

I'm only quoting Ms Tammy Umasaran from Dept of Transport.

And then I've consulted my brains trust ie. YOU GUYS!!

And finally,

I might be paranoid; BUT THAT DOESN'T MEAN THAT THERE'S NO-ONE FOLLOWING ME!!

they can also book you for making an illegal u-turn..as they know what entry you go on at and when you make a u-turn at one of the emergency vehicles only spots to double back and leave at the next exit..they pin you!

Edited by DiRTgarage

I got this email also:

New Legislation M5 & M7 Re Speeding Fines

M5 and the M7 are now equipped with Point to Point Speed Devices. On

entering the M7 the etag beeps and a camera takes a photo

of

your car recording the exact time. On exiting the etag system beeps

again another camera at that point takes a photo of the car and the

time. Then the computer calculates the time it has taken you to travel

between the two points and calculates your speed. If you completed the

clocked journey too fast you are issued with a speeding ticket.

At the present the speed limit is 100K.P.H. with a tolerance of

102 maximum. Over that and you are issued with a fine automatically.

for a week and get a weeks' tickets BOTH WAYS. Of course your license

will also be recalled for 3 months. Now with the new legislation,

fighting a Speed Camera fine is almost impossible You must prove the

device is faulty and if you are not a technician working on them, you

have no chance of beating the fine.

The Pacific Highway has a set and these are recognized by large steel

frames over the lanes with a speed camera and some distance up

the road is another large metal frame with a speed camera.

These new point to point systems are being put onto any expressway and

highway where vehicles are not able to exit between those points.

NOTE: School zone cameras are not speed tolerant. Anything over, even 41, is a fine.

Tammy Umasaran

Corporate & Admin Support

Ministry of Transport

Phone: 02- 9891 8941

Fax: 02- 9891 8999

Greg Edwards

Chief Executive Officer

wk: 02 9780 1303

fx: 02 9892 4005

Was not sent from the Ministry of transport though, my old man sent it to me. Still not sure if this is true or not.

I guess call them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...