Jump to content
SAU Community

Recommended Posts

Its on my X-trail, getting tuned as i speak.

running 7psi hoping for about 260awhp.

QR25DE+T (2.5L 4cyl)

And yeh that's the manifold im using. I took those photos myself, when i was helping my mate make that manifold.

Just trying to find some more specs on it, cos all i was told is its off a Z31 300zx single turbo...

Its bin rebuilt since then, and i didnt get around to asking the guys at turbo tech if they knew.

Its on my X-trail, getting tuned as i speak.

running 7psi hoping for about 260awhp.

QR25DE+T (2.5L 4cyl)

And yeh that's the manifold im using. I took those photos myself, when i was helping my mate make that manifold.

Just trying to find some more specs on it, cos all i was told is its off a Z31 300zx single turbo...

Its bin rebuilt since then, and i didnt get around to asking the guys at turbo tech if they knew.

I have a hi flowed one of those on my 33, if its the normal vg30det turbo then it will have a .6 rear housing, they had ceramic rear wheels standard but that should have been changed when it was rebuilt, if not they can handle 15psi becuase they have a thicker shaft than r33 turbo's, no idea on front wheel and housing sizes as mine uses a standard 33 comp cover that has been machined out to fit the to4 comp wheel.

what are your thoughts about one of your new wastegate actuators (the upgraded beefy ones you'll run on the .82 rears) on OP6 G3 i have?

Its a CAT machinery actuator. by spec its rated to a bout 26psi. I bench tested it, it started to open at 18psi. I got skyline with 5 broken pistons at moment. So waiting for engine overhaul at this stage.

I'm currently under going some creative modifications to stock R33 2IU turbine housing aim is to push out 270rwkws out of this and possible 290rwkws out of the OP6 rear housings. Well only if current meth works.

Thanks for the support guys, I will let you know if I need your car to do trail runs.

  • 2 weeks later...

268rwkws @16psi out of a Powered up R33 turbo high flow.

atr43360hp.jpg

Any one's running 300zx here?

320rwkws out of twin ATR25s on a stock VG30dett Z32 with 750cc injectors, SMIC, and flash tune.

vg30dett429HPDyno.jpg

I'm currently under going some creative modifications to stock R33 2IU turbine housing aim is to push out 270rwkws out of this and possible 290rwkws out of the OP6 rear housings. Well only if current meth works.

Thanks for the support guys, I will let you know if I need your car to do trail runs.

how did you go with the "creative mod"?

The creative mod has been sold to kwrickr33 for evaluation so PM him for results.

Water fittings is M18x1.5 same as your stock fittings. PM me if you need the high pressure CAT actuator when ready for tune.

Its $180. Tested it today. It did hold it pretty fine and blewn up my engine again at 21psi. lol Not sure what the $&%^ happened. Engine's comming out again.

Well. It isn't that bad. because the actuator did hold 21psi. So this actuator can hold boost.

It seems to be the EBC's solenoid failed for some reasons. It was holding 9psi, 12 psi, then the last run was on 15psi. It was all smooth then felt just like the boost line to actuator popped off. Boost went sky rocket. and Boom. Actuator is fine.

Just quick note:

Our last day this year is Tuesday 22nd of Dec and will come back on 15th of Jan 2010. I will get all of yours orders made and sent before we finishing off.

It has been an amazing year, I like to thank you all for your support in 2009.

Merry Xmas + Happy new year to you all.

Its $180. Tested it today. It did hold it pretty fine and blewn up my engine again at 21psi. lol Not sure what the $&%^ happened. Engine's comming out again.

Bugger..... was it forged or stock? 21psi is getting a bit excessive on an old engine too.. you can see why i dont like anything over 19psi unless i know the car intimately.

Bugger..... was it forged or stock? 21psi is getting a bit excessive on an old engine too.. you can see why i dont like anything over 19psi unless i know the car intimately.

The engine originally had 5 cracked pistons through the ring lane area. So I replaced those pistons with a set of brand new OEM pistons and rings. I got them for $500 off some one who bought them and ended up forgies. The engine noise you heard earlier was gone straight after rebuild.

My boost gauge has scale for of 20psi so I guess the tuner wasn't be able to read it if its above. So he said 21psi as the niddel stops there. It was running a ATR43G4 which is identical to a GT3582R in .82 rear.

Well its worth spending $3500 to find out the actuator that works. All for science and my customers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you have a RB25DET NEO AWD motor, you will need this: https://www.hioctanedirect.com/ASR-RB26-RWD-Street-Comp-6.5L-Sump-Suit-R32/33/34-and-VL It is made for the AWD motor, but makes it fit a RWD setup and gives you a new pickup. Just one thing, the pickup sits quite forward, compared to a conventional RB25DET RWD motor. This may or may not have contributed to my previous AWD -> RWD shitting the bed at the track.
    • My car is also flex tuned. It's worth mentioning it (the LS1 ECU) has a 1D table for E85 addition and just uses the ethanol stoich part as the second point of reference. It also as a 3D timing map for Ethanol adjustment. You would think this isn't enough but it works pretty damn well. That said, I wouldn't want it in turbo application. It's like lifting non-natty, or taking meth. It gets you unrealistic results that break down more things going forward. If people used it to make the same amount of power they do on 98 then it'd be one thing. But people use it, crank it up to eleventy million PSI, it doesn't knock - but it pushes the point of failure to another, more expensive thing to break. Every time I see someone make 280kw on 98 and 350kw on E85 on the same equipment I just cry a bit and really wish they would just stay on 98 in that exact scenario. It's bad for you. 
    • This is kind of what I was thinking but the temp sender wire and the two pressure switch wires run through the starter subharnes and I eliminated the two pressure switch wires completely.  @GTSBoy I have a can gauge with unusually bright warnings should the oil pressure fall so the factory light isn't needed. I need to dig out my wiring diagram and see if I can sort this out.
    • It's a valid point. And it is doable with the Nistune. But I'm not inclined to flex it the way Nistune does - certainly not on a Neo ECU. They're already pernickety enough to tune just one one fuel. And of course, I'm not that interested in putting in a Link or similar, on a daily. With the stock ECU, stock looking turbo, etc etc, I still stand a chance of surviving a run-in with the plod. Last time it went over the pits (which was for the transplant, for because of a run-in with the plod), the Nistuned ECU did not even raise an eyebrow. They want to see a stock ECU running the engine, and they are happy to see it do so without the check engine light** on. Never mind that the Nistune is necessary to make the stock ECU work in a different chassis without ABS, TCS, etc. **And they actually provoke the CEL to come on by disconnecting the AFM, to prove that the globe hasn't been pulled!
    • This is why you flex fuel it...
×
×
  • Create New...