Jump to content
SAU Community

Recommended Posts

Heavily interested in SuperStreet...making an ultra responsive turbo setup sounds like my kind of game...let me know if you need donors.

Objective 2:

We will be concentrating into further development of our SuperStreet series. Which is a reliable and responsive small turbo for around 250rwkws applications.

I like the sound of this.

interested in RB26 applications now Stao :D

how about an electrical spool, variable vane, twin low mount turbo application for the RB26! :banana: :banana: :banana:

In regarding to GTR turbos we can currently high flow them to 350HP using factory housings, Response felt like the N1 turbos on road. I haven't had any one supplying dyno sheets on those yet. I'm happy to offer a 30% discount on those GTR high flows for some one whom can supply a dyno result at their peek capacity. Has to be in Melbourne.

Been doing abit of thinking also, If we are going to engineer a turbo for GTR it would be a large single turbo with twin entry turbine housing engineered to bolton to factory manifolds and customized twin dump pattern for stock dump pipes. I will need to get a car to engineer that. probably be starting in the 2nd half of the year.

Also the SS profile its some thing engineered for RB20dets, they run ATR28G1 or G2 chra with .60 comp and .64 rear similar to the 2530s. I'm currently doing some drawings for an external gate plumb back setup, will have some photos shortly.

Little update for the SS profile:

atr43g2front.JPG

atr43g2rear.JPG

Above is running a Duel ceramic ball bearing cartridge with light weight billet 71mm comp wheel in .63 rear and .60 comp. I've modified the blow angle inside the turbine housing which might work better or might not. I will explain the concepts in it if it can prove better result then traditional.

Be installing it tonight and uploading a proper DIY guide.

The turbo’s installed. Here are some DIY information, I've divided it into 9 steps, I will post them at the DIY section. you can check them out on:

DIY, Click Here

I’ve set it to run on 15psi, Its very noticeably more responsive with blow angle modification done. I haven’t driven it hard yet, its making positive boost on from 2500RPMs 2nd gear and pulls hard to 7000RPMs. The power delivery was smooth like factory turbo. Its very quick from 0 ~ 120KM. Will get it tuned and post some results coming week.

sounds like my gcg rb20 highflow job, ~240kw on 18psi and that is with it dropping back to 15psi, full boost is by 3000 in the lower gears and it spools at 2k with light throttle like a stock turbo, don't think I'd have it any other way.

In regarding to GTR turbos we can currently high flow them to 350HP using factory housings, Response felt like the N1 turbos on road. I haven't had any one supplying dyno sheets on those yet. I'm happy to offer a 30% discount on those GTR high flows for some one whom can supply a dyno result at their peek capacity. Has to be in Melbourne.

Been doing abit of thinking also, If we are going to engineer a turbo for GTR it would be a large single turbo with twin entry turbine housing engineered to bolton to factory manifolds and customized twin dump pattern for stock dump pipes. I will need to get a car to engineer that. probably be starting in the 2nd half of the year.

Also the SS profile its some thing engineered for RB20dets, they run ATR28G1 or G2 chra with .60 comp and .64 rear similar to the 2530s. I'm currently doing some drawings for an external gate plumb back setup, will have some photos shortly.

Id be interested in these but i am in sydney tho.

Well with this SS prototype profile I'm expecting it to make an street friendly 260rwkws. I might be able to squeeze out 300rwkws+ since the billet comp wheel we've machined has larger blade area then the casted 71mm wheel. How ever by altering the blow direction for faster shaft speed also picksup heat. We see how it goes.

Mill-180: I would be expecting your car's got all the fuel mods, ECU, cooler, free flow exhaust and hard metal intake pipes. I will refund you 30% of the high flow cost after have your dyno results received. I'm expecting them to make around the 320awkws mark.

Mill-180: I would be expecting your car's got all the fuel mods, ECU, cooler, free flow exhaust and hard metal intake pipes. I will refund you 30% of the high flow cost after have your dyno results received. I'm expecting them to make around the 320awkws mark.

Hi, yes I've got all supporting mods but it's on a built rb25 not a rb26.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...