Jump to content
SAU Community

Recommended Posts

It's not really because I have never ever heard of a defect station removing your entire intake piping to check the comp wheel size, plus I'm fairly sure nissan don't put the specs in a workshop manual so they would have no reference and hence no reason to fail you.

You don't live in the eastern suburbs of Melbourne, do you? Our TMU come to you with a basic toolkit.

The ATR43G3 will make that power fine, the updated Turbine geometry will also give better power down low.

Or for the best street result I recommend the ATR43SS-2.

ok so the updated geometry version what are they worth and the atr43ss-2 what are they worth

The SS-2 is the billet comp wheeled model with FNT turbine. Cost $1900 to build, inc GST and oil line.

the G3 .82 is $1450 inc GST and oil line. There are no additional charge on current turbine geometry.

The SS-2 is the billet comp wheeled model with FNT turbine. Cost $1900 to build, inc GST and oil line.

the G3 .82 is $1450 inc GST and oil line. There are no additional charge on current turbine geometry.

As a comparison what is one of the high flow turbos worth (with the customer providing a std turbo)?

Stao can you provide photos of the new turbine housing at the rear side?

I want to see the dump flange area.

And is there a non skyline specific version that is not v-band?

You don't live in the eastern suburbs of Melbourne, do you? Our TMU come to you with a basic toolkit.

I guess in some ways the beauty of the highflow or similar framed turbo is unless they physically pull the turbo out and measure the wheels it's pretty much impossible to know.

I'de like to watch them pull the standard intake system off a 26 ! haha.

You can be rolling around with 900HP worth of turbo and no one is any the wiser.

I honestly feel sorry for you guys in Vic though, I thought we had it bad up here :unsure: But it seems QLD is one of the laid back states.

Stao can you provide photos of the new turbine housing at the rear side?

I want to see the dump flange area.

And is there a non skyline specific version that is not v-band?

turbine2.JPG

Here's the rear of it. Its can be in a 5 bolt externally gated pattern, Nissan 6 bolt or V band internally gated pattern. Or you can give us a drawing we can make it into what ever pattern you need.

Also went with a mate in a Ford XR6 none turbo for a cruise. At lights, I've managed to keep up with him head to head 1st gear and over take him on the start of 2nd gear with very little wheel spin.

Using traditional .82 PU rear, he over takes me by a 2/3 of a car length on 1st, I normally catch up head to head on end of 2nd with lots of wheel spin and over takes on start of 3rd.

The new turbine geometry is the best could happen to a PU or G3, Its got so much torque with very strong and solid acceleration, totally changed the way of how it behaved on road without the expense of setting up FNT nozzles. I'm very happy with it.

Stao are you going to adapt FNT technology to this new housing?

As I have changed from RB to JZ engine the dump flange area is honestly the only thing stopping me from buying one of your turbos.

What would it cost to do a different dump flange pattern/design?

We've rebuilt and high flowed few turbos for XR6, They make power easily with massive amount of torque. That would be the next turbo motor I would like to look at. The new NA model are not bad picking up speed from standing which gives me a pretty good idea of where I would be on take off.

The other funny thing is the driver's motive. no one manifest their motive at lights, every one quitely parks next to your at red, the motive gets exposed as soon as trafic lights turns green. I'll be interested to engineer the turbo that can launch my car out on the very front without having my motive exposed while I'm parked.

Stao are you going to adapt FNT technology to this new housing?

As I have changed from RB to JZ engine the dump flange area is honestly the only thing stopping me from buying one of your turbos.

What would it cost to do a different dump flange pattern/design?

Well, if the updated geometry can perform similar to the FNT setup then I won't be using the FNT setup on this housing any more. I can make the adaptor for around $150 depending on how complex it is.

Well, if the updated geometry can perform similar to the FNT setup then I won't be using the FNT setup on this housing any more. I can make the adaptor for around $150 depending on how complex it is.

Sorry but I fail to see the logic there?

The FNT update seemed to yield excellent improvements... Unless the tech could not be adapted to this housing design I cant see why you wouldnt want to add to it also?

In my thoughts your FNT tech might further improve the response again.. ?

The flange plate I would want would just be as simple as possible without any obstruction to the exit of the turbo, making it easy to construct press-fit split dump pipes.

I will have a 6boost manifold soon and may be interested in prooving your theory on the 340rwkw G3 if some more developement on response can be implemented.

It cost more time and effort to setup the FNT which do add up to the final bill, So if I can get similar or getter results with out the nozzles then I would perfer without them.

I can install a 3.5 inchs adaptor out of the turbo with a 4 bolt flange if you want. That would be very free flowing.

He is asking if the combination of FNT and this new rear turbine flow design would FURTHER increase the performance or is it calculated to have no major effect?

Also Stao, how much is a low PSI actuator for the turbo you sold me? I want to put the turbo on the car asap because Ive still got to wear in my clutch but I can't do this now because the actuator Ive got is 17psi rated and my engine will pop. I can put this lower PSI actuator on until I get to the tuner and we can fit the higher pressure actuator on. PM me in our big message thread!

Just don't boot it till u get it tuned sarge. Why spend an extra 150$ or whatever they cost when u can control it with ur foot.

Spot on.

Just don't boot it till u get it tuned sarge. Why spend an extra 150$ or whatever they cost when u can control it with ur foot.

Exactly, I wouldnt be giving it full throttle even with a lower pressure actuator! Use your right foot and keep it off boost.

Just had an ATR43SS-1 tuned last night by Trent at Status Tuning. Goal was a super responsive turbo that made ~250rwkw on 98 fuel, then ~280rwkw on E85. I only have the 98 tune so far, as you can see its very close to my goal with 244rwkw. The turbo is very very responsive, I thought as a comparison I would get a standard turbo comparison. I also had the boost plotted before and after the intercooler, as you can see my intercooler is quite restrictive and the gap in pressure increases with rpm. If I can get it to hold 18-19psi, I am sure I can get well into the 250's and maybe crack 260rwkw as Tao did. It has made street driving an absolute blast and it is 100% a street car.

post-29432-0-74815400-1303343915_thumb.jpg

post-29432-0-90211900-1303343923_thumb.jpg

post-29432-0-71733800-1303343928_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...