Manuel Kasko Posted April 26, 2012 Share Posted April 26, 2012 nothing just one guy claiming he can do more Haha dont get Zebra and Toshi in the same thread. Last time I questioned this they pretty much exchanged blows Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332295 Share on other sites More sharing options...
zebra Posted April 26, 2012 Share Posted April 26, 2012 LOL What is that saying "Question Everything" Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332298 Share on other sites More sharing options...
Toshi Posted April 26, 2012 Share Posted April 26, 2012 260kw is only good condition cars (I think mainly engine , intercooler and muffler). Normally 240-250kw same dyno. 260kw and 250kw fuel map and timing map is almost same. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332398 Share on other sites More sharing options...
Birds Posted April 26, 2012 Share Posted April 26, 2012 ED"*"* Ok I stand corrected, now show me one RB.... +1, VG30 is cheating! Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332550 Share on other sites More sharing options...
ARTZ Posted April 26, 2012 Share Posted April 26, 2012 exactly, if we went to the sr20 forums and told them 555s can make over 300rwkw then showed them an rb25 picture we be kicked out...lol Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332563 Share on other sites More sharing options...
Super Drager Posted April 26, 2012 Share Posted April 26, 2012 (edited) exactly, if we went to the sr20 forums and told them 555s can make over 300rwkw then showed them an rb25 picture we be kicked out...lol Fuel pressure and injector size don't magically change between two 6 cylinder engines. That motor is running standard 3 Bar fuel pressure. Edited April 26, 2012 by Super Drager Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332579 Share on other sites More sharing options...
ARTZ Posted April 26, 2012 Share Posted April 26, 2012 but it is running at least 500cc extra, thats assuming its a stock engine which I doubt?? As i said , show me an RB making 400atw on 555s and I will shut up..but generally each cc of injector is worth around 1 hp at the flywheel on an RB as far as i know... Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332594 Share on other sites More sharing options...
slippylotion Posted April 26, 2012 Share Posted April 26, 2012 (edited) generally each cc of injector is worth around 1 hp at the flywheel on an RB as far as i know... That can't be correct. I run 740cc in my SR with stock rail pressure and currently make 270rwkw with 85% duty cycle on E10 100 oct.Or are the extra 2 cyls and .5 ltr making that much of a difference? Edited April 26, 2012 by slippylotion Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332690 Share on other sites More sharing options...
Yeedogga Posted April 26, 2012 Share Posted April 26, 2012 My Hypergear experience- part deux! Hi all, I posted a few weeks ago about my Hypergear experience up to and including fitting of the turbo and a quick run. I had the car tuned yesterday by TOSHI and here are the final results; Car Specs for those who missed the last post; R33 S2 Unopened RB25 ~100,000km Hypergear PU Highflow (non SS1) Blitz return flow FMIC Splitfire Coils Metal intake with std airbox Z32 AFM S15 480cc injectors Gizzmo Boost controller Xtreme Cushion button clutch Peak power of 287.4 RWKW at 20psi which tapers off to around 17-18psi We turned the boost down a little bit and got repeatable runs of around 280-285. TOSHI spent basically a whole day tuning the car and was very very thorough. I would definitely recommend TOSHI without hesitation- he has done a great job with the car and even managed to have the turbo come on alot sooner than i had anticipated! If you need a tune, call TOSHI or PM him on here. The car feels great and when full boost arrives at around 4,500-4,750 it pulls like a train. Put it this way, if one were to open it up on the street (in controlled conditions of course!) you would run out of road pretty quick :-) Any questions feel free to ask away, ill put up some more photos etc when i get around to it. The photo attached is just a photo of the peak run- i have a print out of another run but its in HP which is annoying! Cheers! Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332701 Share on other sites More sharing options...
ARTZ Posted April 26, 2012 Share Posted April 26, 2012 ^^^Well look at that, 480hp from 480cc injectors .. I think a couple of other things worth noting on the zx, they are not nismo sidefeeds (not that it makes any difference) and it is also running huge -8 fuel lines..so even when pushed to 100% duty it has plenty of fuel supply, trying doing that with a stock rail and you might find it difficult.. its a fairly inaccurate rule rule of thumb to say 1cc is 1hp, when I was buying injectors I mentioned it at they just looked at me funny.. A better rule rule of thumb I think is to figure out the bare minimum size you would need then get injectors around 30% bigger so your duty will be around 80% tops..sure you can push anything to make more power than it should but push anything out of its efficiency zone and your asking for problems. Sooner or later you will get what you ask for.. This whole thread has been testament to this with HG constantly pushing his turbos to limits most tuners aren't happy to match knowing their customer will be out there driving it everyday..inefficiency monitored in a controlled environment on a dyno is one thing compared to inefficiency out there on the road everyday..I don't even have gauges in my car, when I get a tune I want it pushed to its limits in the room, but when I drive out I want a tune that's almost idiotproof:D Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332725 Share on other sites More sharing options...
GTScotT Posted April 26, 2012 Share Posted April 26, 2012 That can't be correct. I run 740cc in my SR with stock rail pressure and currently make 270rwkw with 85% duty cycle on E10 100 oct.Or are the extra 2 cyls and .5 ltr making that much of a difference? Nah that is right mate.. Remember you have 50% more injector on an RB simply because there are 6 of them, which is essentially 50% more flow capacity. Total fuel and total boost equals a power figure, because you simply have more fuel you can simply add more air and therefore make more power with the same size injector. Remember also that pressure ratio changes the motors effective efficiency. IE a 2 litre motor run at 2 bar of boost is as efficient (size wise) as a 4 litre motor run on 1 bar. Every bar of pressure added beyond atmospheric effectively doubles the motors size. Or such is the science behind it. FWIW I've also had a Toshi tuned car in the family, it went very well. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332730 Share on other sites More sharing options...
hypergear Posted April 26, 2012 Author Share Posted April 26, 2012 My Hypergear experience- part deux! Hi all, I posted a few weeks ago about my Hypergear experience up to and including fitting of the turbo and a quick run. I had the car tuned yesterday by TOSHI and here are the final results; Car Specs for those who missed the last post; R33 S2 Unopened RB25 ~100,000km Hypergear PU Highflow (non SS1) Blitz return flow FMIC Splitfire Coils Metal intake with std airbox Z32 AFM S15 480cc injectors Gizzmo Boost controller Xtreme Cushion button clutch Peak power of 287.4 RWKW at 20psi which tapers off to around 17-18psi We turned the boost down a little bit and got repeatable runs of around 280-285. TOSHI spent basically a whole day tuning the car and was very very thorough. I would definitely recommend TOSHI without hesitation- he has done a great job with the car and even managed to have the turbo come on alot sooner than i had anticipated! If you need a tune, call TOSHI or PM him on here. The car feels great and when full boost arrives at around 4,500-4,750 it pulls like a train. Put it this way, if one were to open it up on the street (in controlled conditions of course!) you would run out of road pretty quick :-) Any questions feel free to ask away, ill put up some more photos etc when i get around to it. The photo attached is just a photo of the peak run- i have a print out of another run but its in HP which is annoying! Cheers! Another good result from Toshi. The power figure is good, check the actuator reload, it appears if the gate is not 100% sealed, you can find instructions on actuator pre-loading under my youtube account: taosg2001 This is an easy operation that can be done with the turbo still attached. Once gate is sealed and loaded, the car will be able to gain much more response and mid range power. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332740 Share on other sites More sharing options...
ARTZ Posted April 26, 2012 Share Posted April 26, 2012 Hey Stai I'm booked in for the 11th mate you gunna be there in your best dress. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332750 Share on other sites More sharing options...
Birds Posted April 27, 2012 Share Posted April 27, 2012 Fuel pressure and injector size don't magically change between two 6 cylinder engines. That motor is running standard 3 Bar fuel pressure. I'm no fuel injection expert, but I would think the hundreds of different variables between the two engines, not the least being an extra 500cc of displacement or different fuel types, would throw out the maximum achievable power by a fair bit. People might just be playing it safe with bigger injectors, but I haven't seen any 400rwkw RB25s on 555s. That can't be correct. I run 740cc in my SR with stock rail pressure and currently make 270rwkw with 85% duty cycle on E10 100 oct.Or are the extra 2 cyls and .5 ltr making that much of a difference? As Scott said, you have 50% more injectors in an RB supplying to only 25% more displacement, it makes a big difference. Thus S15 injectors are a common upgrade for RB25 engines because they are larger, despite similar factory power outputs for both engines. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332853 Share on other sites More sharing options...
slippylotion Posted April 27, 2012 Share Posted April 27, 2012 I'm no fuel injection expert, but I would think the hundreds of different variables between the two engines, not the least being an extra 500cc of displacement or different fuel types, would throw out the maximum achievable power by a fair bit. People might just be playing it safe with bigger injectors, but I haven't seen any 400rwkw RB25s on 555s. As Scott said, you have 50% more injectors in an RB supplying to only 25% more displacement, it makes a big difference. Thus S15 injectors are a common upgrade for RB25 engines because they are larger, despite similar factory power outputs for both engines. Yeah I understand the extra displacement and 2 extra injectors allowing for more power on a same sized injector. More so questioning the theory of 1cc = 1hp. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332862 Share on other sites More sharing options...
Birds Posted April 27, 2012 Share Posted April 27, 2012 I don't know much about that theory, but from memory it was just a rule of thumb for RB25s or RB engines. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332866 Share on other sites More sharing options...
zebra Posted April 27, 2012 Share Posted April 27, 2012 not always applicable but in the case of RB25/26 it is a good rule of thumb Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332869 Share on other sites More sharing options...
GTScotT Posted April 27, 2012 Share Posted April 27, 2012 Yeah I understand the extra displacement and 2 extra injectors allowing for more power on a same sized injector. More so questioning the theory of 1cc = 1hp. Yeah its not a real definite rule of any sort, just a reasonable way to calculate injector size. IE if i was going to aim for 500whp I would probably run a 800cc injector in the RB25, giving me ability to run the injectors at no more than 80% duty cycle and hit the target. (98 ron example here) Thats all it is mate, a rule of thumb to help with picking the right injector size. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332907 Share on other sites More sharing options...
GTSBoy Posted April 27, 2012 Share Posted April 27, 2012 Absolutely a rule of thumb. And absolutely subject to a few extra variables. But on ANY 6 cylinder engine of reasonable flow ability (so not an old Holden grey or slopey Valiant motor) the rules holds approximately true. 6 x 600 cc injectors is about enough fuel for 600HP. About. Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332913 Share on other sites More sharing options...
slippylotion Posted April 27, 2012 Share Posted April 27, 2012 Easy on the slopey valiant motors mate, I still have one in a VC. ? Link to comment https://www.sau.com.au/forums/topic/261613-hypergear-turbochargers-and-high-flow-services-development-thread/page/245/#findComment-6332931 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now