Jump to content
SAU Community

Recommended Posts

The boost drops off a fair bit up top.

303kw on about 22psi droping back to 19/18psi is a decent result, but it doesnt seem that much different to the g2.5 in terms of response.

The g2.5 made close to that power running 98 on only 20psi didnt it? and pretty close to 200kw at 4000rpm as well

Edited by Mitcho_7

Yeah it's looking like the turbo I'll be after. Want to hit 300rwkw or near enough and hopefully shoot above with e85 if it's ever readily available where I live.

Was gonna use stock manifold but after looking what Stao has said and the Dyno graphs I think I will look at getting a 6boost or brea manifold, depending what is available to me

The temptation to go external gate is there, but I think I'll stand by internal gate

same turbo just pump 98 internally gated. Only shows bit more responsive on paper, but on road its very different to the G2.5. Further response gain will cost top end power unless going external gate.

How ever small differences do adds making a pretty big difference looking back to the old G3. So just have to keep on working at it.

Results from the newer SS2 prototype on Pump 98 internally gated in bolt form. It made final of 302rwkws and did actually manage 200rwkws by 4000RPMs. Pretty sweet to drive on road. At this stage that every HP its getting is based on a trade off of some response. Probably only a tinny bit more room to play with. I will trail one more wheel on it in about a week time.

power.jpg

boost.jpg

Wow I'm excited. Glad I sent it back for updates.

What is the difference between this and the other wheel you will be testing next?

Different profiled wheel blades, also complete with a bigger turbine housing.

I've made one more billet wheel with minor alterations to the hub that I like to get some result off.

Just over-layed new Ss2 against old ex gate 307 result and original 315 int gate result on paper.

New one is impressive. New vs 307 are identical from 4500 to redline. 307 makes more around 3700 but dips at 4100 then they meet up.

Original 315 makes less from 33-5500 of up to 60hp then only makes a bit more to redline compared.

Excellent result

Stao,

Any hope in a twin scroll internally gated turbo making somewhere over 300rwkWs on 98 & full noise around 3500 to 3700 rpm?

Here's an example of what the EVO boys use:

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-VEVO-039&Category_Code=NEW

The idea of running twin external gates etc.. too much money & space used up.

Just put hi-lighter over it. Forgive how rough it is etc.

Yellow is original 315 result

Blue is 307 ex gate

Green is new one with .82 rear

photo-12.jpg

Maybe Stao can get proper comparison sheet when he try's next wheel

Edited by t_revz

Stao,

Any hope in a twin scroll internally gated turbo making somewhere over 300rwkWs on 98 & full noise around 3500 to 3700 rpm?

Here's an example of what the EVO boys use:

http://www.atpturbo....tegory_Code=NEW

The idea of running twin external gates etc.. too much money & space used up.

If that turbo was on decent boost before 5500rpm I would be supprised

Edited by SimonR32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...