Jump to content
SAU Community

Recommended Posts

I'll be be keen on seeing results for the td06sl2 int gate billet wheel as Im intrested in one but the kando ones have boost creep issues cause the wastegate hole is too small so hopefully this one outperforms it

Will you have them in t2 aswell ?

T518 style T28 internally gated patterned turbine castings are available. re-make another wastegate port and disc isn't much of a problem. How ever those turbos don't perform an where near to what they do externally gated mainly due to its turbine wheel and housing design.

I think there would be some money to be made if you could make a decent rb bolt on td turbine housing. Seems everything out there is pretty crap

Our current ATR28xx and ATR43xx Rb25det and SR20det internally gated bolton options are pretty mature, they would out perform most of TDxx turbochargers internally gated (and some externally gated). No point going over what ever already done. Do check them out for a bolton internally gated option.

Our Billet TDxx series will be engineered for externally gated purposes.

All turbochargers will be made to order in strict time bases, great support and customer services as always, and we won't be blocking any one on ebay.

Haha thems fighting words. Good work Stao!!

Stao, the nipple that goes in the top of Ss2 cartridge, do you just use a bit of thread sealant on it? The nipple looks like its supposed to have an o-ring on it but the chra is threaded right to the top with no recess for an o-ring. After a drive the top of the chra is damp with oil. Must be loosing 2-3mL each drive.

Putting loctite thread sealant on it now and will test drive again after lunch

Cool that's what I ended up doing earlier on. Just finishing oil pressure sender fault then I'll degrease it and go for a drive.

3 sleeps til it's tuned

Gahh im so impatient!!

How long did it take for people in perth to recieve there kit from over east ?

Its only been 8 Business days but it feels like a eternity!!!!

Looking forward to what it can do with my 34gtt :)

7-9 consecutive days. Mine has been over n back n over

My SS2 goes on dyno in the morning. Unfortunately the exhaust isn't as free flowing as I would like with a cheap Catco Cat on it. Will change it when I get back from Japan next month

7-9 consecutive days. Mine has been over n back n over

My SS2 goes on dyno in the morning. Unfortunately the exhaust isn't as free flowing as I would like with a cheap Catco Cat on it. Will change it when I get back from Japan next month

What mods? Int or ext gate? 98 or 85?

I've already bought my ss2 int gate but won't be putting it on till next month

So a little eager to see someone elses result!

What mods? Int or ext gate? 98 or 85?

I've already bought my ss2 int gate but won't be putting it on till next month

So a little eager to see someone elses result!

In gate, standard manifold port matched n opened up. 98ron. Poncams, port n polish, head chambers decompressed, power FC with nismo 740's,z32,3inch scotty intake,bell mouth dump to cheap cat to single muffler. Hypertwin. Freshly rebuilt engine

Edited by t_revz

Maybe just for the tune get a straight through?

You dont want to have factor in there that will limit your max output

Unless your tuner will do a touchup for cheap when the new one arrives?

Lol @ smash cat.

do it once do it right Trev, don't pay for 2 tunes coz you couldn't afford a real cat. You will need to retune if this one is a restriction and you change it later.

and yeah, you can YOLO it and smash it out. Mines permasmashed lol

I would have if it wasn't already so noisy. The plan is to smash it later and put a Varex mid muffler and retain oval rear muffler I have on it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought Australia got rid of the "drag dodgy fuel up to 91 RON with ethanol", which is why all E10 advertise as "up to 94 RON" ? Anyway I put E10/91 in the missus' Mazda because she empties the tank weekly, when all my cars get 98RON. tl;dr - turbo - 98 RON, if you can't afford that, sell it and get a commuter car (or tune your car for 91, which no one does).
    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
×
×
  • Create New...