Jump to content
SAU Community

Recommended Posts

Stao why don't you try make the TD06 work with you .82 type B housing?

with a little machine work you could be adding a whole new product to the market.

The SS1PU is not a GTRs.

2ndly if you are comparing td06 to a GTRs its never been compared on fair grounds. Install your td06 internally gated in a stock rb20det manifold plus all the EGR and road legal crap you would normally expected to run on a stock setup, The TD06 would not perform any where near a GTRs or a SS1PU.

All supporting mods counts, The turbocharger does not take all the credits.

I hear what you are saying. SO many people carry on that the std manifold is good for 300-350rwkws etc, I have long been an advocate for binning exhaust manifold asap...but others are happy to use it and hold back the performance gains available to them...combined with the fact for the same price of the HKS GTRS you can buy a complete TD06 setup. So based on dollars spent it is a fair comparison.

Anyway , interesting to see more billet results

So I received my JJR 3inch dump today.

It appears that the inlet area of the exhaust is smaller than the outlet area of the turbo. in some places about 0.5cm in width and length about 1cm. I'll try and machine as much as I can but doesnt appear to be that much room.

Thoughts? Will it be much of a restriction?

Heres a pic, not the best

536314_530663926947971_423679572_n.jpg

It needs a little die grinding by the looks of it, as does the adapter Stao machines up imo.

Can't the machinist at least round the corners a little Stao? Is it a CNC mill?

All the corners in the .82 B rear housing has been rounded off, The flange area can't be any bigger, its been traced through the gasket.

For the Billet TDxx series to work probably there is a need for a proper exhaust manifold, external gate, and a front pipe. I'll get them sorted very soon.

Stao why don't you look into getting a spacer plate made which accommodates your external gate?

that way you can offer the turbos in external format and the user just needs to make a dump pipe, which you can supply a v band ring and clamp for.

Yeah will def be fixing up the dump pipe

Want everything perfect before I fit it all up and dyno it, rather than going to the dyno and finding out all these restrictions

Stao why don't you look into getting a spacer plate made which accommodates your external gate? that way you can offer the turbos in external format and the user just needs to make a dump pipe, which you can supply a v band ring and clamp for.

I should imagine that a spacer between the manifold and the turbo that is big enough to have an outlet for the wastegate will start causing problems with pushing the turbo outward/upward/downward enough to make it start hitting other stuff. Certainly on the factory turbo manifold you'll hit the strut tower after only a smallish push outward.

Ive seen one of those ebay spacers with the 2 bolt flange plate used to mount a precision turbo on a skyline before. It certainly can be done, and if Stao makes the spacer himself Im sure he can also make sure it fits well.

Then again he can just supply housings with a gate port

Dimensionally (in/ex) its the same size as the existing 20g, its blade design that changes. Front cover is the trust style .60

if changes have been made to either inducer or exducer I'm sure stao will correct

Updates:

I'm getting some steam pipe bolton manifold and high mount manifold made overseas as I'm typing. I should have a prototype received by mid next week for trailing and testing. Those manifolds will be available for $300 to our customers assume they perform as expected.

It appears a larger turbine setups would perform better on factory manifolds, I will trail a SS2 in a .82a rear housing on current std manifold for some comparison.

how these going stao.?.are you still going ahead with a cheap steampipe bolt on jobbie?

i'm keen for another turbo, probally a ss2 with the steampipe bolt on if it goes ahead, and stick a gate on the exhaust

housing, just waiting to see how it pans out

cheers

darren

Edited by jet_r31

Yes I've fitted the prototype manifold. It is awful, lots of dressing up work required and i'm certainly not impressed with the level of workmanship, the final product I will be selling will be a steam pipe manifold with every thing done to specifications. it will definitely flow much better then a stock Rb25det manifold.

IMAG1019.jpg

I've re-enforced the the joiner, that is where its likely to crack.

IMAG1021.jpg

I'm pretty sure this is what some people sales on ebay. The bolt pattern on the flanges for cyc 4 5 6 are all out. it won't fit unless dressed up.

IMAG1026.jpg

Finally fitted:

IMAG1028.jpg

By the way any one needs their wastegate opened up? we can perform this service for $120.

IMAG1034.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...