Jump to content
SAU Community

Recommended Posts

Yes its in the video. Here's one more customer's video. I believe this is an ATR43SS-2 running 20psi internally gated. Making 294rwkws on pump 98 fuel.

The stag now rests in Donny @ Forced Motorworx capable hands. To say I'm a little excited is an understatement.

  • 2 weeks later...

here's some more R33 vs. SS2 love, but this one is externally gated - had to turn down the boost to 1.3bar during the day as the head was lifting at 1.6bar LOL

  • Like 2

Nice video footage. :)

This is a set of rather unusual high flow jobs. Pair of high flowed 2860-5s into ATR28SS15. Its going to a Rb30det engine with Rb26 head. Hopefully they will solve the back pressure issues currently experiencing with GTRS turbine wheel. One more thing that I'm alittle concern is the back pressure in the exhaust system as the ATR28SS15 is ideally made to run on a single 3 inches turbo back system, that GTR is pretty good of having 4 inches turbo back exhaust, still have to be shared with two turbo how ever. I've made some oversized thrust collars for that purpose, hopefully be seeing close to 500rwkws with those once fully running.

frontnback.JPG

One more prototype of SAT prototype is made for my single high mount GTR. This one was engineered to make around 450awkws on the current setup without additional lag. It made huge amount of torque, and clutch is gone. This one will definitely be making alot more power, and response is no different to the traditional SAT. Nismo Super coppermix is going in, hopefully be back on the dyno in two weeks time.

carondyno.JPG

atr45satssoncar.jpg

Vs standard ATR45SAT (pink and yellow is from the new prototype, stopped when clutch gave away)

power.jpg

Nice video footage. :)

This is a set of rather unusual high flow jobs. Pair of high flowed 2860-5s into ATR28SS15. Its going to a Rb30det engine with Rb26 head. Hopefully they will solve the back pressure issues currently experiencing with GTRS turbine wheel. One more thing that I'm alittle concern is the back pressure in the exhaust system as the ATR28SS15 is ideally made to run on a single 3 inches turbo back system, that GTR is pretty good of having 4 inches turbo back exhaust, still have to be shared with two turbo how ever. I've made some oversized thrust collars for that purpose, hopefully be seeing close to 500rwkws with those once fully running.

frontnback.JPG

I noticed you have removed the divider between the turbine outlet and the wastegate, just curious of the thinking behind that ?

The exhaust is twin 3" through twin 3" cats into single 4" at the mid muffler then 4" out the rest, back pressure from exhaust shouldn't be an issue :)

  • Like 1

The rear wheels are bigger, once machined the divider turned out to be very thin. Since the compressors are lot bigger also, it will create greater turbine flow. Usually internal waste gates don't at full 90 degrees, the divider would limits the amount of bleeding area around the disc resulting unlimited boost creep, that is some thing else I had in concerns, but I won't know till they are in the car and running.

My recent RAC speed event.

SS2 ~410hp

Despite my over steer incident, my best time of the day.

Great footage :thumbsup:

The rear wheels are bigger, once machined the divider turned out to be very thin. Since the compressors are lot bigger also, it will create greater turbine flow. Usually internal waste gates don't at full 90 degrees, the divider would limits the amount of bleeding area around the disc resulting unlimited boost creep, that is some thing else I had in concerns, but I won't know till they are in the car and running.

I figured there would be a reason, was just curious as to what it was and figured it might have to do with get gases away from turbine, unfortunately I run split dumps and will have to put something back in there so the split dump works the way it is meant to :/

Yep, these are mine and are replacing my GT-RSs in the hope of gaining some response and allow me to run more boost to see if I can crack 500awkw, currently at 458awkw @ 28psi

Cool! I remember drunk conversations at Mick's place a couple of years ago playing around with ideas like this - we were discussing FP based similar solutions, but this works. Will be very interesting to see how it comes out :)

I still wonder/worry a bit about the housings and potential restrictions beyond the actual wheels themselves which could hamper progress but I hope they are unfounded. When do you aim to have this all together?

And by the way, I've made some custom exhaust wheels that is for the GTR OEM high flows. They are engineered to support 300 ~ 350awkws region on pump fuel and response will have similar to stock twins. My car's waiting for bits and pieces, so if any one is interested to evaluate please let me know, I will put a special offer for $1200 on both turbochargers.

  • Like 1

The twin atr28ss1.5 should have no problems cracking 500kw on your rb2630 setup

A single ss1.5 on my old sr20 made a very easy 251kw on 20psi and 266kw with a larger

.86 rear housing and 24psi

Only thing stopping you from running 25+psi maybe the back pressure from the turbines unless stao has changed them as I got mine a while ago 1-2years ago and smaller rear housing will be the best for response

I gained 16kw from going from a .64ar to .86ar but full boost went from 3750rpm to 4100rpm also 4psi more but felt faster and more responsive with the .64 ar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...