Jump to content
SAU Community

Recommended Posts

I've got the older (2008) ML Mitsubishi Triton - 3.2L auto with factory chip 132kw and 420nm 2300kg tow rating. Happily pulls the skyline on a tandem trailer with full steel deck (i.e. heavy ass trailer) at any speed required. Only gripe is the 4 speed auto isn't quite geared right for hilly NZ roads, sometimes seems like it wants another gear between 3rd and 4th up hills.

Can be had pretty cheap these days with reasonable kms on the clock.

  • 2 weeks later...
  • 2 weeks later...

As promised here is my towing report using the Challenger to PI and back. Tows fine, no problems there. Just keep in mind that it has a 2.5 liter TD with a torque reduced auto transmission. But stuck her on cruise control and it delivered 11.6 l/100 average over 1720k of varied road and traffic conditions, from 110kph down.

A Jeep forum may be the go for the Cherokee, good luck.

Falcons have been mentioned here a lot, had a chat at PI with two mature age WA blokes who had towed their Z cars over with latish model Falcon utes. One a six, the other a V8. Both were happy and will do it again, that's a pretty big plus for ye olde Falcon.

A real tow car test is 110kph* down hill on a winding road when you have to brake to avoid the revenue raisers, if the tow car ignores the tail trying to wag the dog then it's good.

* legal speed limit, which always makes sense and is safest. Govco dickheads.

A real tow car test is 110kph* down hill on a winding road when you have to brake to avoid the revenue raisers, if the tow car ignores the tail trying to wag the dog then it's good.

I went from hydraulic to electric brakes on both axles and i have not had the " wagging tail " problem since :)

Airbags are going in as the 22yr old springs don't like the wieght ., I have done 100,000kms of hassle free towing with the old 4.2 turbo diesel

485297_633030303380162_844960270_n.jpg

so the santa fe had its first towing trip.

managed 9.2L per 100 down to Wakefield from Gosford. 280kms

some times I had to remind myself i was towing however the noise did remind me.

being a wagon the noise from the hitch was quite loud going over bumps and stuff. in the commodore no where near as loud.

coming back managed 9.7L per 100 as the stupid M2 had road works and of all the traffic lights from M2 to F3 I got 95% of them as red lights haha

Is anyone using a Toyota prado for towing with?

I'm looking at upgrading my old pajero to an 07-08 prado with the d-4d common rail turbo diesel with the 5 speed auto to tow my r33 gtst with.

Plenty of folks have and I'm sure they'd be just fine.

so the santa fe had its first towing trip.

managed 9.2L per 100 down to Wakefield from Gosford. 280kms

some times I had to remind myself i was towing however the noise did remind me.

being a wagon the noise from the hitch was quite loud going over bumps and stuff. in the commodore no where near as loud.

coming back managed 9.7L per 100 as the stupid M2 had road works and of all the traffic lights from M2 to F3 I got 95% of them as red lights haha

Sounds promising!

Is the the hitch "tongue square" or the ball/trailer that's noisy? A bit of fiddling can get rid of a lot of that.

Bolt/nut for the hitch square to take the slop out, and tighten the trailer hitch adjustment over the ball.

Very good economy!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...