Jump to content
SAU Community

Recommended Posts

This is one of those - "If you havent driven it then you wouldnt know" threads. Birds might think he has a point, and in his mind he probably does...in the real world though its different. Welcome to the future.

As one of the US guys said, I am going to send our R35 GTR back in time to kill the first car to have a gearstick, and Sarah Connor, all at the same time. Thread Terminated.....but not before I say "Handbrake I have your midpipe waiting for you, and it sounds the biz" :)

haha, will try and get it past the treasury dept. Wild thing phoned me today from the sunshine coast. sounds like he couldnt be happier with it.

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

yep - a mid-pipe is the only "must have" for the R35 IMO.

There might be some other "should haves" but the mid-pipe is a must. It gives the car the sound it should have without upsetting anyone or anything.

Why are you firing of at me for?

Because you're the one saying something I don't understand. I'm trying to figure out why the gearbox seems to be the magnet for "I don't like how it removes feel" despite the presence of a lot of other parts, hence why I'm asking.

So I am a "Honda fanboy" now, am I?

Not quite. I said you're acting like one.

The following questions are directed to you as well as Birds (in the same vein). It's at the heart of what I'm trying to work out by questioning you guys.

so favourable about working a clutch? I'll tell you. It makes the few times that I do manage perfect shifts in a drag race that much more special.

OK. I understand that "fun" and "fast" are two different things (I do daily drive a MX-5). However, that's not the point. My line of questioning is to work out why is only the gearbox the part you don't like about the R35?

Isn't a drag race more special when you drive a 2WD car? Isn't it a greater expression of skill and feedback when you can get that perfect balance of clutch and throttle to get it off the line with just enough wheelspin to keep the torque up? Rather than just banging the engine off the cutout and sidestepping the clutch off the line?

Isn't the feedback from the steering wheel, uncorrupted by torque and the unsprung weight of driveshafts, far better for enjoyment and maintaining control of a car? Instead of a computer deciding to shuffle torque to the front of the car, changing its balance and attitude, mid-corner?

No-one bitches that the GT-Rs are active AWD (aside from KPGC10 tragics) but its just as much of a "cancelling out driving input and control" device as the gearbox.

Same with the active suspension, which helps shift the weight around to maximise traction. Isn't it easier when you're the one controlling the weight shift with how fast you lift off the throttle, and how fast you get back on it, so you can keep perfect traction?

At the same time, turbochargers blunt initial throttle response (unless you run anti-lag) and provide an uneven power delivery compared to a normally aspirated car. Even on the more responsive turbo setups on modern cars, let alone older engine designs like the RB, there's a moment of delay between when you actuate the throttle after you've come off it for a while and when the turbochargers manage to re-pressurise the intake.

This removes a noticable amount of that tactile feedback from the throttle (but it does make up for it by making a shitload of power, making it a "technically superior" solution) which takes away from the experience.

It's also a far greater feeling of achievement when you beat someone driving a FI car in an NA one, if "fun" is your driving concern about what you want from a car.

Yet the engine and its induction choice doesn't come under the same barrage either.

And I don't agree with this don't-knock-it-until-you've-tried-it logic.

Neither do I, as a general rule. However, I'm also of the camp that I should approach things with an open mind, and consider informed opinions.

There are guys who were mentally pre-disposed to disliking it (including various journos, and Snowman as he posted on here) who pushed past their prejudices about a semi-auto gearbox and found themselves pleasantly surprised. Those opinions hold far more weight than people ignorant of the topic commenting on something far different than they're used to.

To clarify my position, I'm glad the R35 comes with all the advanced tech that it has. For me, the GT-R is meant to be a fast car (hence all the other "skill robbing" wizardry in the drivetrain). The only thing I'd remove is weight. If we're talking wishes then I wish it came with a Lotus Elise as well.

That way I've got a car that's the last word in speed-for-cost, and another car that is amazingly fun. The latter would shit over any modern Skyline when it comes to the amount of skill needed to drive quickly, and the rewards it gives its driver in return.

Because you're the one saying something I don't understand. I'm trying to figure out why the gearbox seems to be the magnet for "I don't like how it removes feel" despite the presence of a lot of other parts, hence why I'm asking.

Not quite. I said you're acting like one.

The following questions are directed to you as well as Birds (in the same vein). It's at the heart of what I'm trying to work out by questioning you guys.

OK. I understand that "fun" and "fast" are two different things (I do daily drive a MX-5). However, that's not the point. My line of questioning is to work out why is only the gearbox the part you don't like about the R35?

Isn't a drag race more special when you drive a 2WD car? Isn't it a greater expression of skill and feedback when you can get that perfect balance of clutch and throttle to get it off the line with just enough wheelspin to keep the torque up? Rather than just banging the engine off the cutout and sidestepping the clutch off the line?

Isn't the feedback from the steering wheel, uncorrupted by torque and the unsprung weight of driveshafts, far better for enjoyment and maintaining control of a car? Instead of a computer deciding to shuffle torque to the front of the car, changing its balance and attitude, mid-corner?

No-one bitches that the GT-Rs are active AWD (aside from KPGC10 tragics) but its just as much of a "cancelling out driving input and control" device as the gearbox.

Same with the active suspension, which helps shift the weight around to maximise traction. Isn't it easier when you're the one controlling the weight shift with how fast you lift off the throttle, and how fast you get back on it, so you can keep perfect traction?

At the same time, turbochargers blunt initial throttle response (unless you run anti-lag) and provide an uneven power delivery compared to a normally aspirated car. Even on the more responsive turbo setups on modern cars, let alone older engine designs like the RB, there's a moment of delay between when you actuate the throttle after you've come off it for a while and when the turbochargers manage to re-pressurise the intake.

This removes a noticable amount of that tactile feedback from the throttle (but it does make up for it by making a shitload of power, making it a "technically superior" solution) which takes away from the experience.

It's also a far greater feeling of achievement when you beat someone driving a FI car in an NA one, if "fun" is your driving concern about what you want from a car.

Yet the engine and its induction choice doesn't come under the same barrage either.

Neither do I, as a general rule. However, I'm also of the camp that I should approach things with an open mind, and consider informed opinions.

There are guys who were mentally pre-disposed to disliking it (including various journos, and Snowman as he posted on here) who pushed past their prejudices about a semi-auto gearbox and found themselves pleasantly surprised. Those opinions hold far more weight than people ignorant of the topic commenting on something far different than they're used to.

To clarify my position, I'm glad the R35 comes with all the advanced tech that it has. For me, the GT-R is meant to be a fast car (hence all the other "skill robbing" wizardry in the drivetrain). The only thing I'd remove is weight. If we're talking wishes then I wish it came with a Lotus Elise as well.

That way I've got a car that's the last word in speed-for-cost, and another car that is amazingly fun. The latter would shit over any modern Skyline when it comes to the amount of skill needed to drive quickly, and the rewards it gives its driver in return.

Ok I see your point.

Not that I "don't" like the gearbox in the R35 GTR, as said in my earlier post, It is a very superior gearbox.

So yes I do like the gearbox.

I should have said, I "Prefer" a Manual stick shift and clutch pedal.

Growing up driving manual with the stick shift and clutch pedal is pretty much second nature for me + I enjoy it.

"Just because you like it does not mean I have to like it..." - What I meant to say here was, I like having the clutch pedal and stick shift and you prefer not to have it... Doesn't mean I have to like what your like...

Hope I did not confuse you...

Anyway, just a small misunderstanding.

Again, don't get me wrong, the R35 GTR gearbox is superior, I do like it, I just preferred it being a "Manual" as the title of the thread stated.

Cool!

Terry, you can always left foot brake. :P

And shouldn't all your limbs be atrophied by now, since your AWD does all your driving for you anyway? Sklled drivers drive RWD. :blink:

Haha - I can see you in one of Ferdinand's cars

This is one of those - "If you havent driven it then you wouldnt know" threads. Birds might think he has a point, and in his mind he probably does...in the real world though its different. Welcome to the future.

As one of the US guys said, I am going to send our R35 GTR back in time to kill the first car to have a gearstick, and Sarah Connor, all at the same time. Thread Terminated.....but not before I say "Handbrake I have your midpipe waiting for you, and it sounds the biz" :)

How about, welcome to the real world, where life is somewhat subjective (that's right, believe it or not we don't all have the same opinion on things) and people probably know themselves better than you know them? Who are you to judge whether I would prefer this car in manual configuration to the GR6 or not? I acknowledged earlier in this thread that the GR6 was a superior setup for speed...and that sporting a conventional manual setup, the R35 would be nowhere near as fast...but for me speed doesn't necessitate fun. If my intention is to be out having fun I would honestly rather drive my GTS-T than an SMG M3. Have done both and my opinion didn't sway from my expectations. I love changing gears, I love working a clutch, I love perfecting the coordination to a tee, and I love feeling that extra feedback from a car. If I wanted to win a race I'd choose the M3.

Scathing, I never said the gearbox is the only thing I don't like about the R35. There's alot I don't like about it, and yes a good deal of that is the "overuse" of technology. You have me downpat with your questions, actually. I'm an n/a V8, RWD, floorshift and clutch fan. I feel more at home driving an HQ than I do a Subaru Liberty. I curse everytime I G-tech my Skyline for the 0-100 and I lose .3 seconds because of a bad gear change or a failed rev match. I also curse the fine line between getting bogged down with lag and churning the rear tyres. But all those things make the few times where I perfect everything, that much better. Gotta have the bad with the good. The point of my analogy before (i.e. paying someone to drive the car for you), is that you have to draw the line somewhere at technology taking over and detracting from the driving experience until we're left with just a Daytona USA driving simulator...for me that is at the gearbox. It's going to be different for everyone, but eventually somewhere along the way I think you too would draw yourself a line. Question is, where? I can deal with the lag of my turbocharger, as much as it pisses me off in daily traffic and moving off the line without dumping the clutch, but I make this exception because most of the car still represents what I want in a car and my idea of fun. I consider myself open minded to the point where I don't doubt I would enjoy the R35 immensely (though I don't even like to assume whether I would like it or not)...but this would be a "just beat some loaded guy in a Porsche" or "just crapped myself" type of fun, not the same type of fun akin to perfecting a skill set with many variables and the feeling of accomplishment that comes with it.

do I? no way. I've owned and driven many GTRs from 32-35 inclusive, from standard models of each, up to heavily modified ones and whilst I don't wish for a paddle shift in my 32 I certainly don't wish for a manaul box in my 35 either. just like the regular H pattern in the 32 suits the car so does the DSG in the 35. it's part of what the car is. one of the best parts of what the car is actually. without it the car would be much, much slower. you would look and feel like a numpty as all the DSG equipped R35s blew past you on any kind of circuit or strip.

a manual h pattern box in the 35 would be a massive step in the wrong direction. I've been in the passenger seat of the 35 for when many guys had their first drive of one. all of them were amazed at how good the gearbox is and how fast and direct the shifts are. when matt coleman drove my old one he was so impressed with the power, and the DSG that he wanted to know how to buy one straight away. the DSG makes the car.

drive an R35 as it is first, then try and say they with a straight face....

I honestly cannot imagine anyone who had driven an R35 properly would wish a manual box on it. like I said I love the box on my R32 and many other cars I've owned but I wouldn't want it anywhere near my R35...

Fairly obvious to all in the know.....as it makes this car what it is........but more to the point ...R35 owners love to use it in Manual flipping and blipping..

PS: I don't even know why this discussion has gone on so long as it's in every test/review that this automated Clutch Manual Box is

Fantastic......... :P

Id buy this car because its a cool/fast car, if it came in manual over flappy paddle, id buy it.. its just who I am.

If i wanted to buy a fun car, id buy a thrasher.. i love no abs, no traction control, old school manual, no airbags, rwd its that direct contact with the road you feel when you do a fast run in this little 'shitter' which puts such a smile on your face.

But if i wanted to push the limits, get the fastest time, go hardcore and push my adrenalin to the limit, i'd be driving a R35 flappy paddle.

Edited by illusiVe

Just for accuracy. The C4 ZR1 was a quad cam NA jobbie that was released back in 89 with 385hp, a few years later it jumped to 405hp. The current C6 is supercharged pushrod

And, I like the confusion and business of a traditional manual, and during a big braking zone rowing back through the gears. I am sure the R35 is a weapon of a thng....but there is no convincing some people...which is a good thing that we all dont like the same things. Hell i would take a tweaked Exige over an R35 , lol sadly i cant see myself ever owning the cars i actually like, unless Holden release the Camaro and i am so getting my white trash hick ass into one of those :P

Just for accuracy. The C4 ZR1 was a quad cam NA jobbie that was released back in 89 with 385hp, a few years later it jumped to 405hp. The current C6 is supercharged pushrod

Sorry to be a prick Roy....

C4 ZR1 = Quad Cam NA with Lotus designed heads

C6 ZR1 = LS9 Supercharged 6.2 LS3 derived engine

C6 Z06 = LS7 7.0 litre atmo

All junk but :P

Sorry to be a prick Roy....

C4 ZR1 = Quad Cam NA with Lotus designed heads

C6 ZR1 = LS9 Supercharged 6.2 LS3 derived engine

C6 Z06 = LS7 7.0 litre atmo

All junk but :P

LOL, like i said, i was referring to the ZR1 so when i said C6 :( But disagree on all being junk....i have always loved Vettes and the current ZR1 is bliss :)

  • 4 weeks later...

I wouldn't buy a GTR unless it came with a manual. A 30k r34 with 30k put into would destroy anything. I heard months back that Nissan might release a special edition gtr called an (evo?) with a clutched manual, i dont know how true this is or how much they'd try and rape u for it but i'd pay less then 90 for it. I'm still waiting for a magazine feature with someone who has made the perfect GTR retrofitting it with a madly built way overbored rb30 and getrag 6sp.

But when i saw a black edition GTR in the shop before going onto the showroom i only wished i was ready to buy because seeing and sitting in that car makes you think "f*k the manual i just wanna drive this car". I'm glad i didn't trade in my r32 and finance that GTR because nissan will smarten up some day soon and that'll be "the legend" just like the r34 still is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...