Jump to content
SAU Community

Recommended Posts

I am currently on the bus with MADGTR right behind me. Very patiently waiting in a crazy amount of traffic. I waved but I think you were too busy getting blinded by the sun haha

I'll be driving into work in my GTR tomorrow so I can go straight to the SAU Tech night so I will be feeling your pain tomorrow morning as well :P

MADGTR.jpg

5:40 a.m Castlereagh Rd Penrith bound. Guy driving like a tool in a crappy looking red S2 33 GTST. Overtook a long line of cars and continued to over take around a bend on double white lines then continued to do about 100 in an 80 zone. Red number plates starting with ZR. Your my hero, moron.

Edited by FordyR31
  • Like 1

black 34 red p plater at towers parking yesterday arvo. I parked my black 34 next to yours lol.

Also saw a midnight purple 34GTR at norwesr behind the shell station, gave a wave and got a head nod back lol

So it's been a busy day, now have to add a blue r34, a white r34 with red p plates and a r35 gtr in derra industrial area also a black r33 gtr at Warilla beach this arvo

If anyone actually cares haha

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...