Jump to content
SAU Community

Track Report: Rota Rims And P-cup Slicks..


Recommended Posts

  • 4 weeks later...
  • Replies 226
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

We've got a few sets of tyres now for the 2010 season!

Including RE55's, Dunlop and Michelin slicks. Can't wait t see how the Dunlops go, should heat up quicker and be good for the sprints :P

tyres_2010.jpg

If they did indeed run hardness tests (very simple) then you can make a good approximation of the tensile strength. Given casting flaws are one of the main drivers for fatigue cracking I think you can be pretty comfortable based on the x-ray results.

Other than (expensive and time consuming) fatigue testing the only other thing you could possibly do is get a metallurgist to take a look at the microstructure (something the distributor might donate a wheel for perhaps).

well the miss's did some testing on the weekend

punched my rotors up the guter at about 50

they didnt explode into dust either!

Thanks for sharing this info guys.

i have just ordered a set of Volk RE30 19's with Hoosier R6 slicks from the USA. Same set up as alot of guys in the USA are running. Clearances are fine and being Volk im sure there is no question over their strength etc.

RE30 19x10.0 +30 5-114.3

RE30 19x11.0 +20 5-114.3

I know they will be more expensive but will be good to compare in the New Year and see how they go against your set up.

Dont quote me on this but i also think this set up above is approx 7kg lighter per corner.

Thanks for sharing this info guys.

i have just ordered a set of Volk RE30 19's with Hoosier R6 slicks from the USA. Same set up as alot of guys in the USA are running. Clearances are fine and being Volk im sure there is no question over their strength etc.

RE30 19x10.0 +30 5-114.3

RE30 19x11.0 +20 5-114.3

I know they will be more expensive but will be good to compare in the New Year and see how they go against your set up.

Dont quote me on this but i also think this set up above is approx 7kg lighter per corner.

wow, that will be f**king epic.

Thanks for sharing this info guys.

i have just ordered a set of Volk RE30 19's with Hoosier R6 slicks from the USA. Same set up as alot of guys in the USA are running. Clearances are fine and being Volk im sure there is no question over their strength etc.

RE30 19x10.0 +30 5-114.3

RE30 19x11.0 +20 5-114.3

I know they will be more expensive but will be good to compare in the New Year and see how they go against your set up.

Dont quote me on this but i also think this set up above is approx 7kg lighter per corner.

Sounds great and should look good too! Congrats.

well the miss's did some testing on the weekend

punched my rotors up the guter at about 50

they didnt explode into dust either!

Ah bullshit pete - internet experts tell you otherwise, should have turned into pixie dust :laugh:

Gotta love the inernet experts driving 32 taxi's telling the 35 gtr boys how to suck eggs.

because as we all know, money buys smarts. let us all bow down to the owners of expensive cars and their immense wealth of knowledge.

(not a dig at R35 owners, a dig at idiots who think driving an expensive car gives their opinion any more credibility, which clearly some fan boys think)

Speaking of idiots, Was it you reccomending illegal fitment of wheels and tyres to forum users.

yes. just like every day i also recommend illegal coilovers, illegal suspension arms and illegal engine modifications, bit like 90% of SAU now that i think about it.

yes. just like every day i also recommend illegal coilovers, illegal suspension arms and illegal engine modifications, bit like 90% of SAU now that i think about it.

Lol.. scary thing is I'd say 90% is actually more like 99.9%!

  • 3 months later...
Dunc, I am still waiting for UPS to clear my TE37s - should have them tomorrow afternoon all going well, then its straight onto the car for fitment :)

The brand spankers Carrera Cup slicks are sitting here waiting. Also took another 40kg off the car with this baby - our new full Titanium Race exhaust, its light as a feather, around 8kg in total :(

Hey Martin,

How did the Te37's go for brake clearance in the end? trying to decide between the rotas/TE37's.

thanks

haha no problem. it was a pleasure. felt funny driving at 7/10ths though

congrats on the awesome sprint laptime in the s2000. is that thing street legal?? LOL that 4cyl is smashing all the 6's, 8's and turbos out there :)

as for the ROTAs - they are so cheap! Duncan certainly is a convincing arguement for them.

I have been on the phone to Ryan from Jongbloed in the states today.

he reckons his rims allow for good brake clearance due to custom design, and seems happy to stand by his product.

the GOTO R35 team over there have used them without any concerns

plus he will make any size, offset.

come in anodised black too

gtrsunset.jpg

nothing wrong with the rotas for what they are, remember we had them tested/xrayed and the cast was good with no flaws. i am sure the Jongbloed items will be much better proposition though.

Handbrake, just notice this - apologies (Im not here to help people out, just advertise my own stuff right! :blink: )

The clearance is 'minimal' with the TE37s in place.

Also another concern is brake cooling with an 18 as the vanes of the rotor are partially shrouded, but we have something to fix this....ahhh there I go again! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...