Jump to content
SAU Community

Recommended Posts

Sparks are the easiest job on a GTR! Lol

i fear tiny bolts and shit...

flanges with 30mm bolts, yes. 5mm hex heads, are scary. screws get rounded and shit, that'll cause pain...

and sam, alright, i'll bring some new ones then.. lend me thy tools! and i need to get some of my own tools too.

yeah its really easy, just got to disconnect ignitor and unplug one of the tubes over the top.. undo the cover.. 6-7 big bolts holding coilpacks down.. pull them out and they make suction noise *thomp* :nyaanyaa:

Getting the cover off with the hex bolts car be a bitch if the previous owner / mechanic was a douche and did em up to tight.

Agreed, my old 33 was like this, spent quite a time trying to get 3 or 4 off it at GOR cruise.

I'd rather buy a bike what can 4-7k buy you for the car a kit and some rims? :domokun:

Maturity kickin' in yo - shouldn't do the gtr up >_<

Just a bit of a personal question - you guys/gals that are 25 ish renting or got a house? or still living at home? and to add those that do have a house what age were you when you moved in and was it with a gf / wife / a Mohsen?

I'm still living at home myself but thinking of just saving in the next few years for a deposit, have 25k of commonwealth bank shares atm so it would help with the initial saving

Get in the property market asap. Aint going to get any cheaper in the future.

Find yourself a secure job and go to Mortgage Choice to discuss your options. If you want a $300-$400k property you would need about $30,000 - $50,000 deposit upfront. You can either wait to save another $25k, or ask parents to "gift" you the remaining amount for deposit. By law gift means no payback and hence banks wont consider it as an additional loan to the homeloan. Just pay back your parents ontop of the loan repayment

vietnam turned out better than expected :)

singapore reminds me of melbourne a little bit, but its really nice here :)

been here less than a day already seen 2 35 gtr's lol

but the biggest surprise was the cars in viet audi r8 and 2 bentleys, for a 3rd world country they do alright lol

vietnam turned out better than expected :)

singapore reminds me of melbourne a little bit, but its really nice here :)

been here less than a day already seen 2 35 gtr's lol

but the biggest surprise was the cars in viet audi r8 and 2 bentleys, for a 3rd world country they do alright lol

why surprised? The fatcats moving production to Vietnam from Europe/America/Australia need to get around from their hotels :P

fail................

indeed

he walked up to my car and started pointing out the pin dents

LOL YOUR CAR HAS A f**k OFF BIG QUARTER DENT AND ITS GOT RED PEARL AND A PURPLE S1 KIT THAT YOU NEVER TOLD ME ABOUT

omagawd, you guys had to be there. the knock and the throttle getting stuck making it bounce off the limiter for a bit was even funnier

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...