Jump to content
SAU Community

Recommended Posts

I run a 6266 .84 T4 split pulse and made 352rwkw on 21psi that was with E70. Full boost about 4800. Though my Turbo is the Journal bearing one. If you buy BB alot more responsive around 4300rpm. 6266 is good size for 500kw with e85

Big difference between 600 or 700hp? I understand this came for a good price but obviously you aren't happy with it and the car has been built around this turbo now (exhaust cooler pipes etc) if 600 and a bit is your goal and you like response go a 6266 with a 1.0 rear. Your motor will love the larger turbine it will feel nicer down low off boost and it will make 600-650hp quite easily!

Are you on stock capacity? If so a .84 wont be too bad. But obviously you are gunna be leaning pretty hard on a stock motor chasing those numbers.

If your motor goes bang would you stay 2.6 or would you go stroker? If yes to stroker go the 1.0 if happy with 2.6 go .84

Edited by Mick_o
  • Like 1

Big difference between 600 or 700hp? I understand this came for a good price but obviously you aren't happy with it and the car has been built around this turbo now (exhaust cooler pipes etc) if 600 and a bit is your goal and you like response go a 6266 with a 1.0 rear. Your motor will love the larger turbine it will feel nicer down low off boost and it will make 600-650hp quite easily!

Are you on stock capacity? If so a .84 wont be too bad. But obviously you are gunna be leaning pretty hard on a stock motor chasing those numbers.

If your motor goes bang would you stay 2.6 or would you go stroker? If yes to stroker go the 1.0 if happy with 2.6 go .84

i already had a 3.5" tomei exhaust on the car, 3" dump no cat, cooler, pipe work all came with the turbo. sweet im just chasing info at the mo as ive read this thread a few times over since i put this turbo on. yeah shes still a 2.6 if she goes ill be looking at going 2.7 or 2.8. i know she'll get leaned on abit on a stock motor to make those numbers but she is my daily driven car and the occasional track/drag day. for the time been 600 would be the most but once built 700 will be my goal

Edited by cliptonz1

Hey mate, i saw you were selling your turbo on facebook and was going to comme t but didnt want to f**k up your sale.. 20psi @ 5000rpm does not sound right

I use a 6466 Gen2 with .82 Vband single entry housing on my built RB26, which has a Nissan 2.6 crank and HKS 272 10.2mm cams

On E85, it makes 30psi by about 4500rpm, and makes 710rwhp

I would highly recommend this to anyone.. it has less lag than my previous 2860-5 setup, which i personally did not think was laggy.. but theres no contest when compared to a big single, it comes on like an absolute motherf**ker

  • Like 1
  • 1 month later...
34 minutes ago, ohno1 said:

I reckon 1.00 will be too large on a 2.6

Read my mini review of my setup a couple posts up

Cheers mate. 

I was reading the thread for about half an hour. Must of missed the last page..

I have a 1.0 on a 6766 that's bolted to a 2.6 and its fine. E85, 272/264 9.1mm cams and a decent amount of head work and I don't think its laggy at all. I would see full boost (currently 23psi) no later than 4500rpm

  • 1 month later...

Ive decided to go with the gen 2 6266 with a t3 .82 rear on my basic built 25 (cams,springs,studs and forged).. I already had a manifold otherwise i would have liked to go the .82 T4 twinscroll.. but none the less ill be pushing it and hoping to post some decent results in the coming months.. the decision between the 62mm and the 64mm was tough but i decided to go with a slightly more street friendly turbo as after RW17 it will be mainly used around town... 

  • Like 1
  • 1 month later...

So many posts to go through and not enough time :(

So what are people making nowadays with a 6766, 1.0 split rear on E85 on a stock stroke RB26?

My girlfriend seems to think her car is a bit of a nugget and I want to prove her wrong. It runs 138mph in full street trim and makes 485rwkw at 23psi on the Unigoup dyno which is a pretty tough dyno from my experience

Not sure about 6766 but my brother Inlaw, who bought my previous Gtr went 6466 1.00 and maxed the turbo out on his setup at 553kw at 40psi

built 2.6, mild head/cams, 3.5" exhaust etc on United e85 tuned @ Jez . 

 

  • 3 weeks later...
Hi, I am currently still two Td05 g18 billet turbos. I would also like to switch to a singel Precision Turbo.  

My Setup:

 Build Rb26,

ported Head,

Oversize Valve, 

270cams 10.8 mm,

Revlimit: 8500,

1000cc Fic Injectors,

Walbro 450l Fuelpump.

Fuel: 102 oktan, 

Boost max 30psi

I want to more than 800hp on the Flywheel. 

I do not know which turbo I should buy. The 6466 bb or the 6766 bb? And if what ar? I apologize for my bad english :)

Edited by Ersatzreifen

Well. On a near stock head with a quick home port job, stock valves with 80lb springs and a set of drop ins i made near enough to 550awkw on a 2.8 with a 6466 with 84 rear. 4 inch dump was at 49psi. The turbos like to be run hard. 

 

Grab it by the pussy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...