Jump to content
SAU Community

Recommended Posts

I have about 30 sec to get stuff out before it falls unless the ground is really flat.

Mine are labelled as 'STABILUS'

Both side look identical, but the part / serial numbers are different.

Left side:

1804RD 1125N 006/03 H16

90451 A0 010

Right side: 1896RA 1125N 013/03 E16

90450 A0 010

No idea if that helps at all.

Anyone know of a way to make the glass door stay open? Several times it has come crashing down on my head...its quite painful!! Really affects the usefulness - particularly if its windy of if you're parked on a slope.

My rear door struts seem ok at the moment, but the ones that lift up the boot floor are shot.

I normally use a mob called Strut Re-Gas. They're Syd based and mobile, but I'm sure there are others. Normally around $40 per strut, amd the use nitrogen, not compressed air like some less reputable guys. Last ones I had done were still great 7 years down the track. They can also reduce the pressure in any strut to accommodate things like Carbon/fibreglass/alloy bonnets that don't need to hold a lot of weight, or increase pressure to allow for spoilers/wings that drop the bootlid on your head. I'll have a look for the number of my local guy and post it up.

Cheers, Dale

The 25G ones dont open fully, so am looking for replacements.

At Supercheap they have all sorts of struts. Amgoing there tomorrow.

Hugh if you don,t have any joy at S/cheap there is a mob on the Gold Coast who service the marine industry and they re-gas struts at a reasonable price, should be able to find them in Yellow Pages.

I had the bonnet and boot struts regassed on my C34 years ago and they are still going strong, under $200 for the lot. I did check with nissan first, they had no more boot struts and bonnet ones were about 600 a pair.

Also be careful with aftermarket replacements, nissan use unusual/non standard upper and lower mounts (ie better engineered than ford or holden's ones). Supercheap etc only cover the local stuff

  • 3 years later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...