Jump to content
SAU Community

Recommended Posts

Hey Mark,,,how they hangin mate?.

I will find out tomorrow what Cheryl weighs. I've just finished filling her up with 40 litres of fuel for tomorrow so I'll get a wet reading.

Depower the steering,,, While that would save way more than 10 kilo's on a gtst,,,I'd have to go to the gym to steer the bloody thing. I did ages ago try steering her without the belt on and man it was hard going. I seem to remember Duncan struggled with steering his r32 without a belt on the track!!!.

Guessing the weight,,,shit it better not be anywhere near your prediction,,,1375 is standard so anything under 1300 would put a smile on my face tiger.

Cheers

Neil.

1,294KG. That's my uneducated estimate.

So Cheryl got her corner weighting and a wheel alignment today and heres the results.

post-29-0-11094900-1432980554_thumb.jpg post-29-0-45750900-1432980540_thumb.jpg

The alignment turned out bloody great,,,seems I haven't hit anything hard since the last alignment and the cars NOT bent. That tells me 2 things,,,smashing ripple strips does nothing and tieing the car down by the wheel spokes does nothing as well. Happy days.

Corner weighting though has pointed out that I still need to remove lots more weight. I'm starting to think I'm not going to go crazy,,, It's time to working on the Radical for next year.

Heres the corner readouts as the morning went on. 3 hours in total.

post-29-0-20920200-1432984484_thumb.jpg post-29-0-13403000-1432984497_thumb.jpg

The 1st pic is straight out of the trailer and the 2nd is at the end with my weight in the drivers seat.

Cheers

Neil.

Corner weighting though has pointed out that I still need to remove lots more weight. I'm starting to think I'm not going to go crazy,,, It's time to working on the Radical for next year.

Cheers

Neil.

So no hole sawing lots of internal panels out or cutting the ends off any bolts deemed too long? You know you could always drill in the insides of any big bolt out too to save a touch of weight... :P

I enjoy irony.....this is his expensive new cheater tyre on the way down to the dummy grid yesterday....

neil-slick.jpg

How cool would it have been if it had a carlton draught emblem on it,,,still very amusing.

Lots of things came out of this weekend for me and all of them were positives.

Handles is the best pit bitch I've ever had,,,life is so much easier when I don't have to tell someone what to do. It's fantastic to have someone that just does the shit jobs and enjoys it. We walked the track on Saturday morning and it was so refreshing to bounce ideas off him and get his feedback. Having someone that continually checks my tyre pressures and makes the right decisions is a godsend. A MASSIVE thanks Tiger.

The slick are absolutely fantastic and I'm never ever going back to semi's. They are so bloody predictable even in the cold and slightly damp early morning conditions. I was very worried about them wearing out quickly but they look to have little wear on them.

Cheryl ran prefectly all day,,,I thrashed the living shit out of her as usual and she loved every moment of it.,,,she is such a great girl.

Cheers

Neil.

Handles is the best pit bitch I've ever had,,,life is so much easier when I don't have to tell someone what to do. It's fantastic to have someone that just does the shit jobs and enjoys it. We walked the track on Saturday morning and it was so refreshing to bounce ideas off him and get his feedback. Having someone that continually checks my tyre pressures and makes the right decisions is a godsend. A MASSIVE thanks Tiger.

Neil.

I'll hand my resignation in when I come into the office next... :P

I'll hand my resignation in when I come into the office next... :P

Matty,,,having a fellow race car driver thats knows his shit is so helpful. Having someone that can tell me what he would do as opposed to what I think is priceless.

I'm not about to except your resignation just yet,,,so get back to work ya blunger.

cheers

Neil.

Ah the cute couple are back together

Yea but the bastard will still not put out,,,and it doesn't matter how many dinners I buy him. Might have to start touching him inappropriately like I did with you.

Cheers

Neil.

Matty,,,having a fellow race car driver thats knows his shit is so helpful. Having someone that can tell me what he would do as opposed to what I think is priceless.

I'm not about to except your resignation just yet,,,so get back to work ya blunger.

cheers

Neil.

Ha ha ha, Oh I bet it would be a lot more helpful then my ramblings. Plus I bet he's less likely to pick up a hammer first hey... :P
  • Like 1

Ha ha ha, Oh I bet it would be a lot more helpful then my ramblings. Plus I bet he's less likely to pick up a hammer first hey... :P

f**k me I love you talking the talk but you don't help me go faster bitch.

Disclaimer::: no hammers or fuel systems were hurt this weekend.

Fight fight fight fight

Neil is a two timing whore

That's why you love him

3 timing whore actually bitch and if you did the right thing by me I would be the perfect broad minded person and you could be my dirty mole.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...