Jump to content
SAU Community

Recommended Posts

Just a few pics of a test fit. The 7076 is compared to t04z in first pics, I cant believe how big the thing is! I have some more machining to do on manifold then i have to re-fab my dump, make a new s/s intercooler pipe. Put the poncams in, somehow fit the p/s res in there somewhere as the comp cover sits where it did now! then make a oil drain. Im going to use hydraulic hose onto the jic fittings with some fire sleeve over it (unless this is bad idea?) then re fit everything I dont have to molester for this to work, and make an impossible heat shield. Should be fun!

Beautiful looking turbo, Why can't Garrett make Vband compressor housings... Have fun with the fabrication. Take your time to smooth out the flow path, I want to see best possible results out of this one. :)

Beautiful looking turbo, Why can't Garrett make Vband compressor housings... Have fun with the fabrication. Take your time to smooth out the flow path, I want to see best possible results out of this one. :)

I plan too! I have to doctor my manifold too. Its a greddy one and i'v never seen such a shit job. No internal fusion at all, bits on the inside of the collector are coming off. Really need to fix that just got to work out how.

I plan too! I have to doctor my manifold too. Its a greddy one and i'v never seen such a shit job. No internal fusion at all, bits on the inside of the collector are coming off. Really need to fix that just got to work out how.

Be careful... If bits of shite are de-materializing inside the manifold its only going to lead to a busted EFR and no warranty.

I'd be twice as careful with trying to weld it.. And I'd seriously consider parting ways.

Awesome, very much looking forward to seeing how this comes out - EFR7670 on an RB25 was something I fully intended on doing a couple of years ago, and been hoping someone else would do it. Good luck!

Be careful... If bits of shite are de-materializing inside the manifold its only going to lead to a busted EFR and no warranty.

I'd be twice as careful with trying to weld it.. And I'd seriously consider parting ways.

Its just a bit of weld material where someone has welded cracks before thats kinda ugly. I dont plan on welding internally but ill remove any sus looking metal before i fit it back up. Not sure that any would come free but ill tidy it anyway. When this one gets beyond it ill fab a replica one up in 3mm wall s/s. till then ill give it a tidy. Anyone want pics of ugly bit?

My favourite thing about EFR turbos is doing this (very, very quick clutch tap from 2500rpm):

https://www.youtube.com/watch?v=c9FWbtCK2HQ

That's 3rd gear up a hill. Waaaay too scared of breaking the gearbox to do it in 4th.

Edited by bradsm87

I don't mean to take away from all this big numbers talk, but what are peoples opinions/thoughts on a 6258 on a RB20? I'm currently running a 2530, would the 6258 be similar in response/spool?

an RB20 would absolutely rock with the EFR6258. it would feel like an rb26 with good turbos ha

  • Like 1

My favourite thing about EFR turbos is doing this (very, very quick clutch tap from 2500rpm):

That's 3rd gear up a hill. Waaaay too scared of breaking the gearbox to do it in 4th.

Don't take it as gospel, but I think 3rd is weaker than 4th in the SR boxes, due to the bearing locations? So it's not the best option, but hey, they going to break sometime!

  • Like 1

an RB20 would absolutely rock with the EFR6258. it would feel like an rb26 with good turbos ha

Hi Geoff, thanks for the reply. I sent [email protected] an email about purchasing a 6258 and manifold etc to suit, but have yet to recieve a reply. What would be the best way to go about it? Could you moddify the exhaust housing in house prior to shipping, and could you make an internal gate manifold in a t3 configuration to suit?

Thanks,

Tim.

Hi Geoff, thanks for the reply. I sent [email protected] an email about purchasing a 6258 and manifold etc to suit, but have yet to recieve a reply. What would be the best way to go about it? Could you moddify the exhaust housing in house prior to shipping, and could you make an internal gate manifold in a t3 configuration to suit?

sorry, we were away at SEMA. been getting caught up, Ill make sure you get a response on monday. In my opinion, the best way to use any of the EFR turbos is with a twinscroll manifold. The new "G housing" is 0.80 a/r twinscroll IWG B1 frame and available for 7163 first then 6758 and 6258. Of course if youre on a tight budget and wanted to use an off-the-shelf manifold, either t25 or t3 adaptors/flanges could be used or welded on to either side to make it all work

No worries. Interesting. So does the 'G' housing come in a t4 configuration? If so it could be matted to one of your 'off the shelf' twin scroll IWG manifolds?

Is there much difference in a .64 open and a.80 TS?

Hmmm im really liking the idea of an EFR on my evo 9. Kits are priced damn good compared to bolt on turbos too! :D What would you recommend for 300+kw with the best possible response Geoff?

I like this kit but is it possible to use a 7064 instead of the 7670 as my car is stock block 2L?

http://www.full-race.com/store/efr-turbo-kit/mitsubishi-evo-4-9-4g63-top-mount-iwg-efr-twin-scroll-turbo-kit-1.html

Edited by Mick_o

This is a link to a Ford F150 site and Geoff pops up because of the turbo kit Full Race has been developing for the 6000 lb 3.5 litre V6 powered truck . http://www.f150forum.com/f70/definitive-full-race-motorsports-eco-boost-thread-208585/index8/

Page 8 has a pic of BWs mixed flow turbine unique to their EFR 7163 turbocharger . Its interesting to see a different perspective to forced induction particularly regarding the 7163 .

Earlier I found a thread on the Mazdaspeed site that had the comp map of the 7163 , interesting if you haven't seen it , very wide so a wide ranging unit overall .

I'll see if I can find the link , cheers A .

Here it is about half way down . http://www.mazdaspeedforums.org/forum/f424/game-changer-efr-7163-a-159047/

Note the first post where the OP reckons according to Garrett the Indy EFRs don't use the lightweight turbines ?

I'm not sure if a 7064 tops out higher than a final spec 7163 , bigger housings ?

Whatever 60 lb/600 Hp potential is right up there for the frame size . Honeywell must be wondering what to do when this turbo arrives in volume , the OE market would be watching too .

A .

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...