Jump to content
SAU Community

Recommended Posts

I personally think that I would prefer an EFR8374 on my car. In saying that you couldn't really ask much more from the PTE 6262, 710rwhp is crazy and response is very good.

The main thing that turned me off the EFR was the physical size and lack of housing options in external gate, in fact if someone can show me one will fit between my strut tower and my motor, plus a T4 divided in a 0.8 rear and I'll give it a go

I have my 8374 fitting between the struts in my R32, and it has the T4 divided .92A/R IWG housing so it's even fussier to fit. Yeah it's tight, but no issues. You wouldn't want anything smaller than the .92a/r on an RB26 or RB30.....it's borderline too small on mine, I could still fit the A/C pump back in if I wanted......but I'm reserving the space for a dry sump pump one day :-) Edited by Sub Boy32

I have my 8374 fitting between the struts in my R32, and it has the T4 divided .92A/R IWG housing so it's even fussier to fit. Yeah it's tight, but no issues. You wouldn't want anything smaller than the .92a/r on an RB26 or RB30.....it's borderline too small on mine, I could still fit the A/C pump back in if I wanted......but I'm reserving the space for a dry sump pump one day :-)

You arent using a full race manifold then I guess? My full race manifold put the turbo quite a fair bit forward

You arent using a full race manifold then I guess? My full race manifold put the turbo quite a fair bit forward

No, I had Sinco Customs make me one, it's similar to their TO4Z manifold, but has been lowered to suit the extra height of the RB30 and the size of the EFR.

TurboFit1.jpg

TurboFit2.jpg

With the EFR7064....in T4 TS 1.05 A/R configuration

Would this be enough for insane response, broad power band and 8000rpm redline on a 2.0L or 2.2L SR20 (with correct cam selection) while pushing over 400rwhp?

My goals are to find a turbo which will support my goals of a very fast street car (in all aspects) which will also be brutal on the circuit...

With the EFR7064....in T4 TS 1.05 A/R configuration

Would this be enough for insane response, broad power band and 8000rpm redline on a 2.0L or 2.2L SR20 (with correct cam selection) while pushing over 400rwhp?

My goals are to find a turbo which will support my goals of a very fast street car (in all aspects) which will also be brutal on the circuit...

The newer 7163 should be superior, both will support more than 400whp on E85.

Want to keep it on 98 octane....

I like the idea of dual external wastegate T4 twin scroll.... which the 7163 doesn't have.

The 7064 seems (t4 ts 1.05/ar ext wastegate) seems as though itll have more top end potential whilst retaining savage response...

With the EFR7064....in T4 TS 1.05 A/R configuration

Would this be enough for insane response, broad power band and 8000rpm redline on a 2.0L or 2.2L SR20 (with correct cam selection) while pushing over 400rwhp?

My goals are to find a turbo which will support my goals of a very fast street car (in all aspects) which will also be brutal on the circuit...

The 1.05 is prob a bit big. The .92 easily,easily will achieve that goal. I have a 2.15L SR20 with a 7064 .92 and Poncams (tiny) and mine made 258rwkw on about 16psi with very,very conservative timing. It goes a lot harder now but haven't dynoed it since. Still can't afford to take it in for another run. With 24-26psi and 260 degree Procams, it'd go off it's head (Prob 350 odd rwkw. My injectors/gearbox/clutch would not support that level of power).

Edited by bradsm87

Awesome to hear Brad....

What RPM are you achieving full boost and what is the transient/throttle response like? Is the acceleration fairly savage as is and what is the car like for spirited driving?

I hear the EFR's well and truly come to life when high boost is pushed into them.

Full boost at 3300 if loaded up in a high gear from low RPM. Transient throttle at anything above 3700 is insanely, insanely quick on to boost. Comes on gradually and very controllable if loading up from low rpm. If u hit the throttle at 4500-ish, u gotta be careful becomes on very fast and hard.

Been wondering if it's physically possible to fit a 7163 onto a RB25 stock manifold.

I make out that a GT3071 is about 150mm from face of flange to furthest point on compressor housing. The 6758 (which I understand is outline identical to 7163) is about 165~170mm in T25 form. Possibly even bigger in TS T4 format. Given you would need a spacer to fit the 7163 (to convert to T3), it's probably 20mm or so closer to shock tower...

Anyone know how much extra room there is in R33 GTST engine bay with GT3071 / GT3076? Would one of these EFR turbos fit?

Pics below of references. I made pretty agricultural measurements assuming the pics are to scale.

post-83859-0-29311700-1387582398_thumb.jpg

post-83859-0-99090700-1387582523_thumb.jpg

Also for s#!ts and giggles, I overlaid GT3071, GT3076 and EFR 7163 compressor maps.

Notes:

Efficiency island:

GT 76%

EFR 74%

Speed lines:

GT 120k

EFR 110k & 130k

The 7163 looks pretty damn impressive. Thoughts on how spool time would be compared with GT3071?

post-83859-0-92399000-1387583072_thumb.png

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...