Jump to content
SAU Community

Recommended Posts

It was literally a 20 minute job :( It's been driving me bezerk!

I'm happy to not have you not pay me to not do it? Not? :D

If you want some tape I can probably hook you up. Either that or Con-Tact adhesive backed felt is good for this too.

only kidding mate. my car doesnt have many rattles.

if i hear anything i shouldnt, i just turn up the radio :D

hopefully got a buyer for my corolla so i dont have to sell my other cars due to the gfc!- quite happy as id sell my first born before i sold the stagea :D

anyone recommend a brissy local for a starter rebuild?

Edited by PetroDola
hopefully got a buyer for my corolla so i dont have to sell my other cars due to the gfc!- quite happy as id sell my first born before i sold the stagea :D

anyone recommend a brissy local for a starter rebuild?

From what im told they cant be repaired as it is one of the copper coils that blows out (thats what happened to mine anyway) you will probably need to source a s/h one from a wreckers. I know they are the same as a VQ25, possibly VQ30. 3.5 has a different part number but may fit...

I have one here in need of repair if they happen to find the parts to fix yours...

3/4 of the way through fitting up my new motor with all my other bit's....hopefully tomorrow the motor and gearbox back in!

Nice intake mate... :D

You managed to keep the heat shield too. I bet its easier to work on the turbo out of the car...

From what im told they cant be repaired as it is one of the copper coils that blows out (thats what happened to mine anyway) you will probably need to source a s/h one from a wreckers. I know they are the same as a VQ25, possibly VQ30. 3.5 has a different part number but may fit...

I have one here in need of repair if they happen to find the parts to fix yours...

sobering - i thought it mightve been an oil lubricated one and thats why it cooked.

sourcing one from wreckers isnt going to be easy around these parts , maybe down there, looks like my car is going to be bricking the driveway for weeks to come if thats the case.

what else other than an m35 has a vq25 though ?

thanks for the solid advice Scott

Edited by PetroDola
From what im told they cant be repaired as it is one of the copper coils that blows out (thats what happened to mine anyway) you will probably need to source a s/h one from a wreckers. I know they are the same as a VQ25, possibly VQ30. 3.5 has a different part number but may fit...

I have one here in need of repair if they happen to find the parts to fix yours...

What bit can't be repaired? You have rewinders surely?
howd u do the diff ?

I got a bit carried away in the grass events at the local car show. I think I dumped the clutch too hard in reverse gear... :P

Gunna get it fixed in the new year. New diff, uni joint for the drive shafts, get the rear diff checked out, brass button clutch is a little noisy so that will get a look too.

I am keen to have an A1 drivetrain. Does anyone know if these cars will handle 8000RPM launches? :P

sobering - i thought it mightve been an oil lubricated one and thats why it cooked.

sourcing one from wreckers isnt going to be easy around these parts , maybe down there, looks like my car is going to be bricking the driveway for weeks to come if thats the case.

what else other than an m35 has a vq25 though ?

The J32 Maxima (2009) has a VQ25de I believe. Wouldn't think the starter would be any different to what we have.

Edited by iamhe77

I cleaned my Stagea last night! Filled it up with fuel. (full tank - $100 later FFS!)

Going to clean the interior and do a bit of a service soon!

She goes alright. Not as quick as a Turbo Datsun 1600 though :P But a hell of a lot quieter. :P

I cleaned my Stagea last night! Filled it up with fuel. (full tank - $100 later FFS!)

Going to clean the interior and do a bit of a service soon!

She goes alright. Not as quick as a Turbo Datsun 1600 though :P But a hell of a lot quieter. ;)

Pics?

3/4 of the way through fitting up my new motor with all my other bit's....hopefully tomorrow the motor and gearbox back in!

nice man.

i'm still gonna call you Mr. Flinstone however!

intake looks nice. need to get Mr Fisher to make mine some time sooooooon.

The J32 Maxima (2009) has a VQ25de I believe. Wouldn't think the starter would be any different to what we have.

+1, VQ25dd, but as we know, its FWD... so may fit, maybe not?

Do they have a relay or something that could be kaput?

soo...

finally got the car back in my hands today!!

alot of you know that ive smashed up my engine rather bad... that aside all is well now :blink:

done and spent a dime on it, but is very very good now!!

made 217.10 AWKW/250kw rears on the 21st run @ 16psi.... (poor car!!)

turbo pulls amazing... as per dyno graph :P

post-47249-1291191938_thumb.jpg

Edited by chef_stagea

not bad at all what turbs you running and computer

soo...

finally got the car back in my hands today!!

alot of you know that ive smashed up my engine rather bad... that aside all is well now :)

done and spent a dime on it, but is very very good now!!

made 217.10 AWKW/250kw rears on the 21st run @ 16psi.... (poor car!!)

turbo pulls amazing... as per dyno graph :)

soo...

finally got the car back in my hands today!!

alot of you know that ive smashed up my engine rather bad... that aside all is well now :)

done and spent a dime on it, but is very very good now!!

made 217.10 AWKW/250kw rears on the 21st run @ 16psi.... (poor car!!)

turbo pulls amazing... as per dyno graph :)

Good result and yeah, what turbo? (You need to get that 260RS out from under your name - its confusing!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...