Jump to content
SAU Community

Recommended Posts

Value for money get the turbo with an internal gate .82 turbine housing, get an exhaust cam gear and get it retuned. You will need a line kit, intake and cooler pipping modded and a completely new dump pipe.

GCG have given me a rough price of $2200 for the GTX with rear housing. You can then get your mechanic to make you the dump/cooler/intake pipes and buy a RB/Garrett BB line kit from Kinugawa on ebay. The line kit is about $100 and I anticipate you will need to spend roughly 800 making the dump and other associated pipes. GCG also sell gates cam gears for something like $100 each and tuning will be up to your tuner.

GCG Also sell a complete kit with the lines, dump pipe etc. I believe the price was around $3k for the GT3071/76 so I wonder if its gone up for the GTX series?

6boost mani for $2500??? Last i seen they only 1200bux custom.....

When you go high mount you tend to need more than just a manifold to make it work... also having external wastegate would be a good start ;)

This.

I'll be getting a GTX3582R soon. .82 internally gated. Best I found so far was $2200. Don't need a kit cuz it will all bolt up with my current gt3076r kit. Can't wait :)

Wow thats big news, I cant wait for the results either! So a GT35 will fit onto the standard exhaust manifold? I thought the standard exhaust manifold started to become a reasonable restriction over 300rwkw?

Just checking, i'm sure you can't but thought it would be worth asking as i'm not that knowledgeable.

Could I get a GTX3071 and use the exhaust housing from my current KKR560. I would love that because then i don't need to buy an exhaust housing, dump pipe or any of that, so i'd save money. My current exhaust housing has already been chopped up my mr turbo to remove the "twin scroll" partition, and make the wastegate hole heaps bigger.

Random copy and paste in case it's helpful:

KKR560 One of the largest internal-gate turbos on the market Oil-cooled, 0.84 turbine housing suits T3 size flange Internal wastegate with 8psi actuator Suitable for single-turbo applications on 3.0-4.5 litre engines, or in twin turbo kits on 6.0 to 7.0 litre engines Comes with 71mm V-band section and V-band for dump pipe, T3 exhaust gasket, oil inlet banjo bolt and oil return gasket. RRP $999 Specifications for KKR560core: Compressor inlet pipe 76mm, compressor outlet pipe 50mm 55 trim compressor; inducer 61mm, exducer 82mm Turbine wheel outlet 56mm, outer diameter 73mm

As I said, i'm sure this is a ridiculous question, but thought i might as well ask :)

Just checking, i'm sure you can't but thought it would be worth asking as i'm not that knowledgeable.

Could I get a GTX3071 and use the exhaust housing from my current KKR560. I would love that because then i don't need to buy an exhaust housing, dump pipe or any of that, so i'd save money. My current exhaust housing has already been chopped up my mr turbo to remove the "twin scroll" partition, and make the wastegate hole heaps bigger.

Random copy and paste in case it's helpful:

As I said, i'm sure this is a ridiculous question, but thought i might as well ask :)

No you need to change to the garett housing since you will get poor results with the kkr housing.

I'll be getting a GTX3582R soon. .82 internally gated. Best I found so far was $2200. Don't need a kit cuz it will all bolt up with my current gt3076r kit. Can't wait :)

My vote is for keeping the 3076, go E85 and run 23-25psi. Should make 340-350rwkw, improve your current awesome reponse (E85) and have a spastic mid range and top end!

RB25DETS2 runs a HKS 3037 Pro S on 23psi on E85 on a stock RB25 making 348-356rwkw depending on dyno. As we know the 3037 is a 3076 with a few tricks so is directly applicable.

NYTSKY has also had the 3076 up to 350rwkw maybe even more I cant remember.

I think a GTX35R really demands an aftermarket manifold etc.

Heres to hoping that updates will be posted in this thread as australian outlets get stock of GTX3071.

Just checking... I used to run no cat or mufflers on my car, but i've cleaned up my act now so that i don't upset the neighbors.

There's no problem running a screamer pipe on a GTX3071 right? Like it will only get loud once i'm making some kind of boost, right?

Isaac

I've contacted ATP and RSP to get quotes for GTX3071's internally gated T3 0.82 housing and flange shipped to Gold Coast, Australia.

They replied back to confirm address, so I guess i'll hear back with a price this afternoon. If it's acceptable, looks like i might get the world's best xmas present :cheers:

I'm happy to post up the prices here, for anybody else looking, or is that inappropriate?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...