Jump to content
SAU Community

Recommended Posts

car as it stands now.....shocking photo

BBS center caps are absent.....had a set of red/gold ones sent from overseas - and had the black ones off in preperation......they arrived on thursday and girlfriend accidentally threw them down the rubbish chute with a bunch of other rubbish before i got home.....devestated! new set on order :/

IMAG0044.jpg

Edited by SMOKEYC34

I bought a new headunit, pioneer one with USB and Bluetooth for $200 cost it was last years one. Pretty happy with that one

I also have a word of warning to ppl thinking of getting alloy radiators, I don't think they can be cleaned like conventional radiators. Mine has blocked up and now heats up on the highway or going uphill for too long :( fml

car as it stands now.....shocking photo

BBS center caps are absent.....had a set of red/gold ones sent from overseas - and had the black ones off in preperation......they arrived on thursday and girlfriend accidentally threw them down the rubbish chute with a bunch of other rubbish before i got home.....devestated! new set on order :/

:O

Lesson learned: ALWAYS get car parts delivered to work (dependant on work site of course).

Oh, and nice looking Stag! :)

:O

Lesson learned: ALWAYS get car parts delivered to work (dependant on work site of course).

Oh, and nice looking Stag! :)

ALWAYS!(needed to be repeated)

my mum nearly put my GTR brakes in hard rubbish lol

car as it stands now.....shocking photo

BBS center caps are absent.....had a set of red/gold ones sent from overseas - and had the black ones off in preperation......they arrived on thursday and girlfriend accidentally threw them down the rubbish chute with a bunch of other rubbish before i got home.....devestated! new set on order :/

Car is looking awesome dude, time for a new gf though? tongue.gif

thanks - it looks much nicer with the caps on and the front lip installed, but had to remove that - driveway entrance to the apartment is too steep and it scrapes.

next step will be vinyl wrap on the roof and mirrors, then detail the engine bay.

got maxima gas struts for the bonnet, and a radiator air guide to install this weekend.

car as it stands now.....shocking photo

BBS center caps are absent.....had a set of red/gold ones sent from overseas - and had the black ones off in preperation......they arrived on thursday and girlfriend accidentally threw them down the rubbish chute with a bunch of other rubbish before i got home.....devestated! new set on order :/

IMAG0044.jpg

Looks tough with those BBS; very nice.:thumbsup:

Time for G/f retraining.:whistling:

well, i decided to get stuck into my stagea exhaust once again,

i currently have a huge Jasma rear cannon AND a set of twin 3" blast pipes that i change between(jasma for long trips, blast pipes for fun)

But the car has been running the blast pipes for the last month or so and i have been getting sick of the massive drone at low revs.

I concocted a simple plan....make some bigger 3.5" blast pipes with hidden hot dogs.

Since i work at a Holden dealer i grabbed a couple of discarded VE SS hot dogs, these are 2.25" and are of high quality.

DSC01513.jpg

i bought a couple of short lengths of 3.5" pipe, and one larger length of 3".

DSC01515.jpg

Previously i have bought premade 2 into 1 collectors, but i figured i'd save some money and make my own

DSC01526.jpg

DSC01527.jpg

the 3.5" pipe was the exact same diameter as the hot dogs, which works well for stealthyness plan

DSC01530.jpg

i attached my homemade collectors, which still had to be trimmed up.

DSC01531.jpg

DSC01536.jpg

after a bit of smoothing with the angle grinder aand a flapper disc, they got a coat of heatproof black paint and were fitted up to my old rear section.

DSC01540.jpg

after running the car for a little while to bake the paint on i took it for a test run.

thecar sound exactly the same, maybe a bit depper, but my annoying drone is all but gone.

and it now pops bigger flames because my tailpipe area is retaining more heat :thumbsup:

You and your flames...

Looks great Robbie, you going to keep them on for the cruise?

definately, these ones have no more drone and a nice note, so they can stay on for good.

my jasma cannon is going to be relegated to the defect clearing section of the shed :whistling:

car as it stands now.....shocking photo

BBS center caps are absent.....had a set of red/gold ones sent from overseas - and had the black ones off in preperation......they arrived on thursday and girlfriend accidentally threw them down the rubbish chute with a bunch of other rubbish before i got home.....devestated! new set on order :/

Looks great man. Excactly what i was going to do.... Are they 19 x 9.5 +22 (per chance :whistling: )From a guy in Brissy??

after running the car for a little while to bake the paint on i took it for a test run.

thecar sound exactly the same, maybe a bit depper, but my annoying drone is all but gone.

and it now pops bigger flames because my tailpipe area is retaining more heat :thumbsup:

Note to self: Don't drive behind Robbie on the next cruise!

the stagea got a fresh sump full of oil this week, the new exhaust, some fresh tyres and a wheel align.

And i finally pulled the centre of my dash apart to fix some rattles and re-route my ipod and av connectors to the centre console.

It turns out that the little tray under the lid is the perfect size for an iphone or ipod :thumbsup:

On the hunt for an immobiliser. And desperate to get it on ASAP due to the recent mass car jacking that took place here in Canberra the other nite. FFFUUUUUU!

I got one of these from an SDU group buy from the US:

http://www.yulontech....asp?infoid=122

It provides location if the car is moved out of a set area...(will send you an sms message with its location) or you can phone it to ask for its location. You can immobilise the car remotely with your cell phone etc etc

was on the Monash Fwy today behind a truck and something fell off it...I had no chance to dodge and it went under the car.

Made some loudass bangs.

Now when I accelerate hard my car makes clicky/rattling noises...great >_<

Checked under the car and now I have 3 bigass dents in the exhaust system...farrrk.

Dropped the oil and topped up with Motul. As usual the filter was on too tight by the previous guy who did it (RVO auto) and I had do the whole stab the filter with the screw driver thing...made a huge mess...arrgh.

also raised the rear suspension by a few cm...hopefully that'll minimise anymore scrapage...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...